Download or read book Vibrations of Rotating Machinery written by Osami Matsushita and published by Springer. This book was released on 2017-05-22 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book opens with an explanation of the vibrations of a single degree-of-freedom (dof) system for all beginners. Subsequently, vibration analysis of multi-dof systems is explained by modal analysis. Mode synthesis modeling is then introduced for system reduction, which aids understanding in a simplified manner of how complicated rotors behave. Rotor balancing techniques are offered for rigid and flexible rotors through several examples. Consideration of gyroscopic influences on the rotordynamics is then provided and vibration evaluation of a rotor-bearing system is emphasized in terms of forward and backward whirl rotor motions through eigenvalue (natural frequency and damping ratio) analysis. In addition to these rotordynamics concerning rotating shaft vibration measured in a stationary reference frame, blade vibrations are analyzed with Coriolis forces expressed in a rotating reference frame. Other phenomena that may be assessed in stationary and rotating reference frames include stability characteristics due to rotor internal damping and instabilities due to asymmetric shaft stiffness and thermal unbalance behavior.
Download or read book Rotordynamics written by Agnieszka Muszynska and published by CRC Press. This book was released on 2005-05-20 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the most important parts of rotating machinery, rotors are also the most prone to mechanical vibrations, which may lead to machine failure. Correction is only possible when proper and accurate diagnosis is obtained through understanding of rotor operation and all of the potential malfunctions that may occur. Mathematical modeling, in particular
Download or read book Vibrations in Rotating Machinery written by and published by . This book was released on 1977 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1986 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2021-06-08 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration-based Condition Monitoring Stay up to date on the newest developments in machine condition monitoring with this brand-new resource from an industry leader The newly revised Second Edition of Vibration-based Condition Monitoring: Industrial, Automotive and Aerospace Applications delivers a thorough update to the most complete discussion of the field of machine condition monitoring. The distinguished author offers readers new sections on diagnostics of variable speed machines, including wind turbines, as well as new material on the application of cepstrum analysis to the separation of forcing functions, structural model properties, and the simulation of machines and faults. The book provides improved methods of order tracking based on phase demodulation of reference signals and new methods of determining instantaneous machine speed from the vibration response signal. Readers will also benefit from an insightful discussion of new methods of calculating the Teager Kaiser Energy Operator (TKEO) using Hilbert transform methods in the frequency domain. With a renewed emphasis on the newly realized possibility of making virtual instruments, readers of Vibration-based Condition Monitoring will benefit from the wide variety of new and updated topics, like: A comprehensive introduction to machine condition monitoring, including maintenance strategies, condition monitoring methods, and an explanation of the basic problem of condition monitoring An exploration of vibration signals from rotating and reciprocating machines, including signal classification and torsional vibrations An examination of basic and newly developed signal processing techniques, including statistical measures, Fourier analysis, Hilbert transform and demodulation, and digital filtering, pointing out the considerable advantages of non-causal processing, since causal processing gives no benefit for condition monitoring A discussion of fault detection, diagnosis and prognosis in rotating and reciprocating machines, in particular new methods using fault simulation, since “big data” cannot provide sufficient data for late-stage fault development Perfect for machine manufacturers who want to include a machine monitoring service with their product, Vibration-based Condition Monitoring: Industrial, Automotive and Aerospace Applications will also earn a place in university and research institute libraries where there is an interest in machine condition monitoring and diagnostics.
Download or read book Vibration and Shock Handbook written by Clarence W. de Silva and published by CRC Press. This book was released on 2005-06-27 with total page 1837 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every so often, a reference book appears that stands apart from all others, destined to become the definitive work in its field. The Vibration and Shock Handbook is just such a reference. From its ambitious scope to its impressive list of contributors, this handbook delivers all of the techniques, tools, instrumentation, and data needed to model, analyze, monitor, modify, and control vibration, shock, noise, and acoustics. Providing convenient, thorough, up-to-date, and authoritative coverage, the editor summarizes important and complex concepts and results into “snapshot” windows to make quick access to this critical information even easier. The Handbook’s nine sections encompass: fundamentals and analytical techniques; computer techniques, tools, and signal analysis; shock and vibration methodologies; instrumentation and testing; vibration suppression, damping, and control; monitoring and diagnosis; seismic vibration and related regulatory issues; system design, application, and control implementation; and acoustics and noise suppression. The book also features an extensive glossary and convenient cross-referencing, plus references at the end of each chapter. Brimming with illustrations, equations, examples, and case studies, the Vibration and Shock Handbook is the most extensive, practical, and comprehensive reference in the field. It is a must-have for anyone, beginner or expert, who is serious about investigating and controlling vibration and acoustics.
Download or read book Topics in Modal Analysis II Volume 6 written by R. Allemang and published by Springer Science & Business Media. This book was released on 2012-04-28 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics in Modal Analysis II, Volume 6: Proceedings of the 30th IMAC, A Conference and Exposition on Structural Dynamics, 2012, is the sixth volume of six from the Conference and brings together 65 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: Aerospace, Acoustics, Energy Harvesting, Shock and Vibration, Finite Element, Structural Health Monitoring, Biodynamics Experimental Techniques, Damage Detection, Rotating Machinery, Sports Equipment Dynamics, Aircraft/Aerospace.
Download or read book A Handbook on Torsional Vibration written by British Internal Combustion Engine Research Association and published by Cambridge University Press. This book was released on 1958 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 1958 book was primarily written to provide information on torsional vibration for the design and development departments of engineering companies, although it was also intended to serve students of the subject. It will be of value to anyone with an interest in torsional vibration and the development of engineering practice.
Download or read book The Shock and Vibration Digest written by and published by . This book was released on 2000 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration of Structures and Machines written by Giancarlo Genta and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the present book is to address practical aspects of nonlinear vibration analysis. It presents cases rarely discussed in the existing literature on vibration - such as rotor dynamics, and torsional vibration of engines - which are problems of considerable interest for engineering researchers and practical engineers. The book can be used not only as a reference but also as material for graduate students at Engineering departments, as it contains problems and solutions for each chapter.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Forsthoffer s Best Practice Handbook for Rotating Machinery written by William E. Forsthoffer and published by Elsevier. This book was released on 2011-05-21 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimize plant asset safety and reliability while minimizing operating costs with this invaluable guide to the engineering, operation and maintenance of rotating equipment Based upon his multi-volume Rotating Equipment Handbooks, Forsthoffer's Best Practice Handbook for Rotating Machinery summarises, expands and updates the content from these previous books in a convenient all-in-one volume. Offering comprehensive technical coverage and insider information on best practices derived from lessons learned in the engineering, operation and maintenance of a wide array of rotating equipment, this new title presents: - A unique "Best Practice" and "Lessons Learned" chapter framework, providing bite-sized, troubleshooting instruction on complex operation and maintenance issues across a wide array of industrial rotating machinery. - Five chapters of completely new material combined with updated material from earlier volumes, making this the most comprehensive and up-to-date handbook for rotary equipment currently available. Intended for maintenance, engineering, operation and management, Forsthoffer's Best Practice Handbook for Rotating Machinery is a one-stop resource, packed with a lifetime's rotating machinery experience, to help you improve efficiency, safety, reliability and cost. - A unique "Lessons Learned/Best Practices" component opens and acts as a framework for each chapter. Readers not only become familiar with a wide array of industrial rotating machinery; they learn how to operate and maintain it by adopting the troubleshooting perspective that the book provides - Five chapters of completely new material combined with totally updated material from earlier volumes of Forsthoffer's Handbook make this the most comprehensive and up-to-date handbook for rotary equipment currently - Users of Forsthoffer's multi-volume Rotating Equipment Handbooks now have an updated set, with expanded coverage, all in one convenient, reasonably-priced volume
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibrations in Rotating Machinery written by IMechE (Institution of Mechanical Engineers) and published by John Wiley & Sons. This book was released on 2004-10-22 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential text contains the papers from the 8th international IMechE conference on Vibrations in Rotating Machinery held at the University of Wales, Swansea in September 2004. The themes of the volume are new developments and industrial applications of current technology relevant to the vibration and noise of rotating machines and assemblies. TOPICS INCLUDE Rotor balancing – including active and automatic balancing Special rotating machines – including micromachines Oil film bearings and dampers Active control methods for rotating machines Smart machine technology Dynamics of assembled rotors Component life predictions and life extension strategies The dynamics of geared systems Cracked rotors – detection, location ad prognosis Chaotic behaviour in machines Experimental methods and discoveries.
Download or read book Dynamics of Rotating Machines written by M. I. Friswell and published by Cambridge University Press. This book was released on 2010-03-31 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables engineers to understand the dynamics of rotating machines, from basic explanations to detailed numerical models and analysis.
Download or read book Practical Solution of Torsional Vibration Problems written by William Ker Wilson and published by . This book was released on 1956 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2011-03-25 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Without doubt the best modern and up-to-date text on the topic, wirtten by one of the world leading experts in the field. Should be on the desk of any practitioner or researcher involved in the field of Machine Condition Monitoring" Simon Braun, Israel Institute of Technology Explaining complex ideas in an easy to understand way, Vibration-based Condition Monitoring provides a comprehensive survey of the application of vibration analysis to the condition monitoring of machines. Reflecting the natural progression of these systems by presenting the fundamental material and then moving onto detection, diagnosis and prognosis, Randall presents classic and state-of-the-art research results that cover vibration signals from rotating and reciprocating machines; basic signal processing techniques; fault detection; diagnostic techniques, and prognostics. Developed out of notes for a course in machine condition monitoring given by Robert Bond Randall over ten years at the University of New South Wales, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications is essential reading for graduate and postgraduate students/ researchers in machine condition monitoring and diagnostics as well as condition monitoring practitioners and machine manufacturers who want to include a machine monitoring service with their product. Includes a number of exercises for each chapter, many based on Matlab, to illustrate basic points as well as to facilitate the use of the book as a textbook for courses in the topic. Accompanied by a website www.wiley.com/go/randall housing exercises along with data sets and implementation code in Matlab for some of the methods as well as other pedagogical aids. Authored by an internationally recognised authority in the area of condition monitoring.
