Download or read book Permanent Magnet Synchronous Machines written by Sandra Eriksson and published by MDPI. This book was released on 2019-08-20 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in permanent magnet synchronous machines (PMSMs) is continuously increasing worldwide, especially with the increased use of renewable energy and the electrification of transports. This book contains the successful submissions of fifteen papers to a Special Issue of Energies on the subject area of “Permanent Magnet Synchronous Machines”. The focus is on permanent magnet synchronous machines and the electrical systems they are connected to. The presented work represents a wide range of areas. Studies of control systems, both for permanent magnet synchronous machines and for brushless DC motors, are presented and experimentally verified. Design studies of generators for wind power, wave power and hydro power are presented. Finite element method simulations and analytical design methods are used. The presented studies represent several of the different research fields on permanent magnet machines and electric drives.

Download or read book Design of Rotating Electrical Machines written by Juha Pyrhonen and published by John Wiley & Sons. This book was released on 2013-09-26 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: In one complete volume, this essential reference presents an in-depth overview of the theoretical principles and techniques of electrical machine design. This timely new edition offers up-to-date theory and guidelines for the design of electrical machines, taking into account recent advances in permanent magnet machines as well as synchronous reluctance machines. New coverage includes: Brand new material on the ecological impact of the motors, covering the eco-design principles of rotating electrical machines An expanded section on the design of permanent magnet synchronous machines, now reporting on the design of tooth-coil, high-torque permanent magnet machines and their properties Large updates and new material on synchronous reluctance machines, air-gap inductance, losses in and resistivity of permanent magnets (PM), operating point of loaded PM circuit, PM machine design, and minimizing the losses in electrical machines> End-of-chapter exercises and new direct design examples with methods and solutions to real design problems> A supplementary website hosts two machine design examples created with MATHCAD: rotor surface magnet permanent magnet machine and squirrel cage induction machine calculations. Also a MATLAB code for optimizing the design of an induction motor is provided Outlining a step-by-step sequence of machine design, this book enables electrical machine designers to design rotating electrical machines. With a thorough treatment of all existing and emerging technologies in the field, it is a useful manual for professionals working in the diagnosis of electrical machines and drives. A rigorous introduction to the theoretical principles and techniques makes the book invaluable to senior electrical engineering students, postgraduates, researchers and university lecturers involved in electrical drives technology and electromechanical energy conversion.

Download or read book Permanent Magnet Synchronous and Brushless DC Motor Drives written by Ramu Krishnan and published by CRC Press. This book was released on 2017-12-19 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite two decades of massive strides in research and development on control strategies and their subsequent implementation, most books on permanent magnet motor drives still focus primarily on motor design, providing only elementary coverage of control and converters. Addressing that gap with information that has largely been disseminated only in journals and at conferences, Permanent Magnet Synchronous and Brushless DC Motor Drives is a long-awaited comprehensive overview of power electronic converters for permanent magnet synchronous machines and control strategies for variable-speed operation. It introduces machines, power devices, inverters, and control, and addresses modeling, implementation, control strategies, and flux weakening operations, as well as parameter sensitivity, and rotor position sensorless control. Suitable for both industrial and academic audiences, this book also covers the simulation, low cost inverter topologies, and commutation torque ripple of PM brushless DC motor drives. Simulation of the motor drives system is illustrated with MATLAB® codes in the text. This book is divided into three parts—fundamentals of PM synchronous and brushless dc machines, power devices, inverters; PM synchronous motor drives, and brushless dc motor drives. With regard to the power electronics associated with these drive systems, the author: Explores use of the standard three-phase bridge inverter for driving the machine, power factor correction, and inverter control Introduces space vector modulation step by step and contrasts with PWM Details dead time effects in the inverter, and its compensation Discusses new power converter topologies being considered for low-cost drive systems in PM brushless DC motor drives This reference is dedicated exclusively to PM ac machines, with a timely emphasis on control and standard, and low-cost converter topologies. Widely used for teaching at the doctoral level and for industrial audiences both in the U.S. and abroad, it will be a welcome addition to any engineer’s library.

Download or read book FUNDAMENTALS OF HEAT AND MASS TRANSFER written by B. K. VENKANNA and published by PHI Learning Pvt. Ltd.. This book was released on 2010-01-01 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This comprehensive text on the basics of heat and mass transfer provides a well-balanced treatment of theory and mathematical and empirical methods used for solving a variety of engineering problems. The book helps students develop an intuitive and practical under-standing of the processes by emphasizing the underlying physical phenomena involved. Focusing on the requirement to clearly explain the essential fundamentals and impart the art of problem-solving, the text is written to meet the needs of undergraduate students in mechanical engineering, production engineering, industrial engineering, auto-mobile engineering, aeronautical engineering, chemical engineering, and biotechnology.

Download or read book Advanced Theory of Fractional Slot Concentrated Wound Permanent Magnet Synchronous Machines written by Mohammad Farshadnia and published by Springer. This book was released on 2018-03-27 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the analytical modeling of fractional-slot concentrated-wound (FSCW) interior permanent magnet (IPM) machines and establishes a basis for their magnetic and electrical analysis. Aiming at the precise modeling of FSCW IPM machines’ magnetic and electrical characteristics, it presents a comprehensive mathematical treatment of the stator magneto-motive force (MMF), the IPM rotor non-homogeneous magnetic saturation, and its airgap flux density. The FSCW stator spatial MMF harmonics are analytically formulated, providing a basis on which a novel heuristic algorithm is then proposed for the design of optimal winding layouts for multiphase FSCW stators with different slot/pole combinations. In turn, the proposed mathematical models for the FSCW stator and the IPM rotor are combined to derive detailed mathematical expressions of its operational inductances, electromagnetic torque, torque ripple and their respective subcomponents, as a function of the machine geometry and design parameters. Lastly, the proposed theories and analytical models are validated using finite element analysis and experimental tests on a prototype FSCW IPM machine.

Download or read book The proceedings of the 10th Frontier Academic Forum of Electrical Engineering FAFEE2022 written by Qingxin Yang and published by Springer Nature. This book was released on 2023-09-14 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the original, peer-reviewed research papers from the 10th Frontier Academic Forum of Electrical Engineering (FAFEE 2022), held in Xi’an, China, in August 2022. It gathers the latest research, innovations, and applications in the fields of Electrical Engineering. The topics it covers include electrical materials and equipment, electrical energy storage and device, power electronics and drives, new energy electric power system equipment, IntelliSense and intelligent equipment, biological electromagnetism and its applications, and insulation and discharge computation for power equipment. Given its scope, the book benefits all researchers, engineers, and graduate students who want to learn about cutting-edge advances in Electrical Engineering.

Download or read book Computer Engineering in Applied Electromagnetism written by Slawomir Wiak and published by Springer Science & Business Media. This book was released on 2006-06-07 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Engineering in Applied Electromagnetism contains papers which were presented at the International Symposium on Electromagnetic Fields in Electrical Engineering, held in Maribor, Slovenia, 18-20 September 2003. It consists of three parts, Computational Techniques, Electromagnetic Engineering, and Special Applications. The contributions selected for the book cover a wide spectrum of theory and practice, being simultaneously of high theoretical level and deeply rooted in engineering problems. Thus, this volume touches on what is of key importance in electromagnetism.

Download or read book Permanent Magnet Synchronous Machines and Drives written by Wei Xu and published by CRC Press. This book was released on 2023-07-31 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permanent magnet synchronous motors (PMSMs) are popular in the electric vehicle industry due to their high-power density, large torque-to-inertia ratio, and high reliability. This book presents an improved field-oriented control (FOC) strategy for PMSMs that utilizes optimal proportional-integral (PI) parameters to achieve robust stability, faster dynamic response, and higher efficiency in the flux-weakening region. The book covers the combined design of a PI current regulator and varying switching frequency pulse-width modulation (PWM), along with an improved linear model predictive control (MPC) strategy. Researchers and graduate students in electrical engineering, systems and control, and electric vehicles will find this book useful. Features: • Implements evolutionary optimization algorithms to improve PMSM performance. • Provides coverage of PMSM control design in the flux-weakening region. • Proposes a modern method of model predictive control to improve the dynamic performance of interior PMSM. • Studies the dynamic performance of two kinds of PMSMs: surface-mounted and interior permanent magnet types. • Includes several case studies and illustrative examples with MATLAB®. This book is aimed at researchers, graduate students, and libraries in electrical engineering with specialization in systems and control and electric vehicles.

Download or read book Control of Permanent Magnet Synchronous Motors written by Sadegh Vaez-Zadeh and published by Oxford University Press. This book was released on 2018-02-23 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permanent magnet synchronous (PMS) motors stand at the forefront of electric motor development due to their energy saving capabilities and performance potential. The motors have been developed in response to mounting environmental crises and growing electricity prices, and they have enabled the emergence of motor drive applications like those found in electric and hybrid vehicles, fly by wire, and drones. Control of Permanent Magnet Synchronous Motors is a timely advancement along that path as the first comprehensive, self-contained, and thoroughly up-to-date book devoted solely to the control of PMS motors. It offers a deep and extended analysis, design, implementation, and performance evaluation of major motor control methods, including Vector, Direct Torque, Predictive, Deadbeat, and Combined Control, in a systematic and coherent manner. All major Sensorless Control and Parameter Estimation methods are also studied. The book places great emphasis on energy saving control schemes.

Download or read book Third Harmonic Utilization in Permanent Magnet Machines written by Kai Wang and published by Springer. This book was released on 2018-08-29 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the utilization of harmonics in the permanent magnet (PM) or rotor shape to improve the torque density of PM brushless AC machines including three-phase inner rotor and outer rotor machines, five-phase machines, dual three-phase machines, linear machines, by means of analytical, finite element analyses, and as well as experimental validation. The torque density can be improved while the torque ripple remains low in PM shaping utilizing the 3rd harmonic. In this book, the analytical expression of output torque is derived for PM machines with rotor shape using the 3rd harmonic, and then the optimal 3rd harmonic for maximizing torque is analytically obtained. The book compares the PM shape in surface-mounted PM (SPM) machines and the rotor lamination shape in interior PM (IPM) machines utilizing the 3rd harmonic, and it becomes clear that their shaping methods and amount of torque improvement are different. In a five-phase PM machine, the 3rd harmonic can be utilized in both the current waveform and PM shapes to further improve the output torque. For the dual three-phase SPM machines without deteriorating the torque more than 30% when the optimal 3rd harmonic into both the current and PM shape are injected. The harmonics in airgap flux density have significant influence on the cogging torque, stator iron flux distribution, and radial force between the rotor and stator. These effects has been investigated as well in this book.

Download or read book Advances in Mechanical Engineering ICME written by Mark Zhou and published by Trans Tech Publications Ltd. This book was released on 2011-03-28 with total page 2256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from 2011 First International Conference on Mechanical Engineering, April 3-4, Phuket, Thailand, 2011

Download or read book Computer Field Models of Electromagnetic Devices written by Sławomir Wiak and published by IOS Press. This book was released on 2010 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Field Models of Electromagnetic Devices, volume 34 in the book series Studies in Applied Electromagnetics and Mechanics is devoted to modeling and simulation, control systems, testing, measurements, monitoring, diagnostics and advanced software

Download or read book Advanced Direct Thrust Force Control of Linear Permanent Magnet Synchronous Motor written by Muhammad Ali Masood Cheema and published by Springer Nature. This book was released on 2020-02-13 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the direct thrust force control (DTFC) of tubular surface-mount linear permanent magnet synchronous motors (linear PMSMs). It presents a detailed account and analysis of several advanced nonlinear control schemes, based on the direct thrust control principle, to achieve a reduction in steady-state ripple in thrust force with faster transient response, and describes their experimental validation. It also provides rigorous details of the dynamic modelling of linear PMSMs from a control system perspective, and demonstrates the superior control performance of the proposed techniques compared to the current state-of-the-art techniques. Lastly, the book proposes and validates a stator flux observer for sensorless speed estimation comprising a linear state observer and an improved sliding mode component.

Download or read book Electrical Machine and Drive Introduce to Advance Control written by Rajendra Aparnathi and published by Lulu.com. This book was released on 2013-09-27 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book is a source for B E, M.E and research aspirants. Working in the fields of inverters, converters and Advance technique in Electrical and Electronics Engineering

Download or read book Deadbeat Direct Torque Flux Control for Interior Permanent Magnet Synchronous Machines written by Jae Suk Lee and published by . This book was released on 2009 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Guidance Navigation and Control written by Liang Yan and published by Springer Nature. This book was released on 2021-11-12 with total page 5416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features the latest theoretical results and techniques in the field of guidance, navigation, and control (GNC) of vehicles and aircraft. It covers a range of topics, including, but not limited to, intelligent computing communication and control; new methods of navigation, estimation, and tracking; control of multiple moving objects; manned and autonomous unmanned systems; guidance, navigation, and control of miniature aircraft; and sensor systems for guidance, navigation, and control. Presenting recent advances in the form of illustrations, tables, and text, it also provides detailed information of a number of the studies, to offer readers insights for their own research. In addition, the book addresses fundamental concepts and studies in the development of GNC, making it a valuable resource for both beginners and researchers wanting to further their understanding of guidance, navigation, and control.

Download or read book Conference Proceedings of 2021 International Joint Conference on Energy Electrical and Power Engineering written by Wenping Cao and published by Springer Nature. This book was released on 2022-10-12 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be a collection of the papers presented in the 2021 International Joint Conference on Energy, Electrical and Power Engineering (CoEEPE’21) , covering new and renewable energy, electrical and power engineering. It is expected to report the latest technological developments in the fields developed by academic researchers and industrial practitioners, with a focus on component design, optimization and control algorithms in electrical and power engineering systems. The applications and dissemination of these technologies will benefit research society as new research directions are getting more and more inter-disciplinary which require researchers from different research areas to come together and form ideas jointly. It will also benefit the electrical engineering and power industry as we are now experiencing a new wave of industrial revelation, that is, electrification, intelligentization and digitalisation of our transport, manufacturing process and way of thinking.