Download or read book Tools for Design Using AutoCAD 2013 and Autodesk Inventor 2013 written by Randy Shih and published by SDC Publications. This book was released on 2012-06-21 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tools for Design is intended to provide the user with an overview of computer aided design using two popular CAD software packages from Autodesk: AutoCAD and Autodesk Inventor. This book explores the strengths of each package and show how they can be used in design, both separately and in combination with each other. What you'll learn How to create and dimension 2D multiview drawings using AutoCAD How to freehand sketch using axonometric, oblique and perspective projection techniques How to create 3D parametric models and 2D multiview drawings using Autodesk Inventor How to reuse design information between AutoCAD and Autodesk Inventor How to combine parts into assemblies including assembly modeling with a LEGO® MINDSTORMS® Education Base Set with TETRIX® kit and a VEX Robot Kit How to perform basic finite element stress analysis using Inventor Stress Analysis Module

Download or read book Residential Design Using AutoCAD 2013 written by Daniel John Stine and published by SDC Publications. This book was released on 2012-04-27 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residential Design Using AutoCAD 2013 is an introductory level tutorial which uses residential design exercises as the means to teach you AutoCAD 2013. Each book comes with a DVD containing numerous video presentations in which the author shows and explains the many tools and techniques used in AutoCAD 2013. After completing this book you will have a well-rounded knowledge of Computer Aided Drafting that can be used in the industry and the satisfaction of having completed a set of residential drawings. This textbook starts with an optional section that covers basic hand sketching techniques and concepts intended to increase your ability to sketch design ideas by hand and to think three-dimensionally. The book then proceeds with a basic introduction to AutoCAD 2013. The first three chapters are intended to get you familiar with the user interface and many of the common menus and tools. Throughout the rest of the book you will design a residence through to its completion. Using step-by-step tutorial lessons, the residential project is followed through to create elevations, sections, details, etc. Throughout the project, new AutoCAD commands are covered at the appropriate time. Focus is placed on the most essential parts of a command rather than an exhaustive review of every sub-feature of a particular command. The Appendix contains a bonus section covering the fundamental principles of engineering graphics that relate to architecture.

Download or read book Autodesk AutoCAD 2013 written by and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mastering Autodesk Inventor 2010 written by Curtis Waguespack and published by John Wiley & Sons. This book was released on 2010-12-28 with total page 1059 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete tutorial for the real-world application of Autodesk Inventor, plus video instruction on DVD Used to design everything from airplanes to appliances, Autodesk Inventor is the industry-leading 3D mechanical design software. This detailed tutorial and reference covers practical applications to help you solve design problems in your own work environment, allowing you to do more with less. It also addresses topics that are often omitted from other guides, such as Inventor Professional modules, design tactics for large assemblies, using 2D and 3D data from other CAD systems, and a detailed overview of the Inventor utility tools such as Design Assistant and Task Scheduler that you didn't even know you had. Teaches the most popular 3D mechanical design software in the context of real-world workflows and work environments Provides an overview of the Inventor 2010 ribbon Interface, Inventor design concepts, and advanced information on productivity-boosting and visualization tools Offers crucial information on data exchange, including SolidWorks, Catia, Pro-E, and others. Shares details on documentation, including exploded presentation files, simple animations, rendered animations and stills with Inventor Studio, and sheet metal flat patterns Covers Inventor, Inventor Professional, and Inventor LT Includes a DVD with before-and-after tutorial files, a searchable PDF of the book, innovative video tutorials for each chapter, and more Mastering Autodesk Inventor teaches you to get the most from the software and provides a reference to help you on the job, allowing you to utilize the tools you didn't even know you had to quickly achieve professional results. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.

Download or read book Autodesk Inventor 2012 and Inventor LT 2012 Essentials written by Thom Tremblay and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential guide to learning Autodesk Inventor and Inventor LT The new Essentials books from Sybex are beautiful, task-based, full-color Autodesk Official Training Guides that help you get up to speed on Autodesk topics quickly and easily. Inventor Essentials thoroughly covers core features and functions of Autodesk's industry-leading 3D mechanical design software, teaching you what you need to become quickly productive with the software. By following the book's clear explanations, practical tutorials, and step-by-step exercises, you'll cover all the bases. Topics include drawing, modeling parts, creating assemblies, working with plastic and sheet metal parts, automating processes with iLogic, and much more. Whether you're an aspiring manufacturing designer or just brushing up on the basics, this is the essential grounding you need in Autodesk Inventor. Covers Autodesk Inventor 2012 and Inventor 2012 LT fundamentals, so you become quickly productive with the software Uses straightforward explanations and real-world, hands-on exercises and tutorials to teach the software's core features and functions Helps you develop the skills you'll need throughout a typical workflow, whether you're a beginner or a more experienced user brushing up on the basics Prepares you for the Autodesk Inventor Certified Associate and Professional exams and is also an Autodesk Official Training Guide From appliances to airplanes, from furniture to cars, you can design it using Autodesk Inventor and this essential guide.

Download or read book Parametric Modeling with Autodesk Inventor 2013 written by Randy H. Shih and published by SDC Publications. This book was released on 2012 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parametric Modeling with Autodesk Inventor 2013 contains a series of sixteen tutorial style lessons designed to introduce Autodesk Inventor, solid modeling, and parametric modeling. It uses a hands-on, exercise-intensive approach to all the import parametric modeling techniques and concepts. The lessons guide the user from constructing basic shapes to building intelligent mechanical designs, creating multi-view drawings and assembly models. Other featured topics include sheet metal design, motion analysis, 2D design reuse, collision and contact, stress analysis and the Autodesk Inventor 2013 Certified Associate Examination.

Download or read book Tools for Design Using Autocad 2014 and Autodesk Inventor 2014 written by Randy Shih and published by SDC Publications. This book was released on 2013 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tools for Design is intended to provide the user with an overview of computer aided design using two popular CAD software packages from Autodesk: AutoCAD and Autodesk Inventor. This book explores the strengths of each package and show how they can be used in design, both separately and in combination with each other. What you'll learn How to create and dimension 2D multiview drawings using AutoCAD How to freehand sketch using axonometric, oblique and perspective projection techniques How to create 3D parametric models and 2D multiview drawings using Autodesk Inventor How to reuse design information between AutoCAD and Autodesk Inventor How to combine parts into assemblies including assembly modeling with a LEGO® MINDSTORMS® Education Base Set with TETRIX® kit and a VEX Robot Kit How to perform basic finite element stress analysis using Inventor Stress Analysis Module

Download or read book Introduction to Autodesk Inventor 2013 and AutoCAD 2013 written by Randy Shih and published by SDC Publications. This book was released on 2012 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most schools using Autodesk software first introduce students to the 2D features of AutoCAD and then go on to its 3D Capabilities. Inventor is usually reserved for the second or third course or for a solid modeling course. However, another possibility is to introduce students first to solid modeling using Autodesk Inventor and then to introduce AutoCAD as a 2D product. In this book students learn to create solid models using Autodesk Inventor and then learn how to create working drawings of their 3D models using AutoCAD. This approach provides students with a strong understanding of the process used by many professionals in the industry to create models and working drawings. This book contains a series of tutorial style lessons designed to introduce Autodesk Inventor, AutoCAD, solid modeling, and parametric modeling. It uses a hands-on, exercise-intensive approach to all the import parametric modeling techniques and concepts. The lessons guide the user from constructing basic shapes to building intelligent mechanical designs, creating multi-view drawings and assembly models. An Introduction to Inventor 2013 and AutoCAD 2013 consists of eleven chapters from Parametric Modeling with Inventor 2013 and six chapters from AutoCAD 2013 Tutorial-First Level: 2D Fundamentals. Both of these books are highly regarded and are very popular making this book an exceptional value for anyone interested in learning both software packages.

Download or read book Introduction to AutoCAD 2021 for Civil Engineering Applications written by Nighat Yasmin and published by SDC Publications. This book was released on 2020-09 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an old saying that an engineer describes every idea with a drawing. With the advances in computer technology and drawing software, it has never been easier, or more important, to learn computer aided design. To be effective, however, a drawing must accurately convey your intended meaning and that requires more than just knowing how to use software. This book provides you with a clear presentation of the theory of engineering graphics and the use of AutoCAD 2021 as they pertain to civil engineering applications. This combination of theory and its practical application will give you the knowledge and skills necessary to create designs that are accurate and easily understood by others. Each chapter starts with a bulleted list of chapter objectives followed by an introduction. This provides you with a general overview of the material that will be covered in the chapter. The contents of each chapter are organized into well-defined sections that contain step-by-step instructions and illustrations to help you learn to use the various AutoCAD commands. More importantly, you will also learn how and why you would use these tools in real world projects. This book has been categorized and ordered into 12 parts: • Introduction to AutoCAD 2021 ribbon interface (1-7) • Dimensioning and tolerancing using AutoCAD 2021 (8-9) • Use of AutoCAD in land survey data plotting (10-11) • The use of AutoCAD in hydrology (12-13) • Transportation engineering and AutoCAD (14-15) • AutoCAD and architecture technology (16-18) • Introduction to working drawings (19) • Plotting from AutoCAD (20) • External Reference Files - Xref (21) • Suggested drawing problems (22-23) • Bibliography • Index

Download or read book Tools for Design Using AutoCAD 2022 and Autodesk Inventor 2022 written by Randy Shih and published by SDC Publications. This book was released on 2021-07 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tools for Design is intended to provide you with an overview of computer aided design using two popular CAD software packages from Autodesk: AutoCAD and Autodesk Inventor. This book explores the strengths of each package and shows how they can be used in design, both separately and in combination with each other. What you'll learn • How to create and dimension 2D multiview drawings using AutoCAD • How to freehand sketch using axonometric, oblique and perspective projection techniques • How to create 3D parametric models and 2D multiview drawings using Autodesk Inventor • How to reuse design information between AutoCAD and Autodesk Inventor • How to combine parts into assemblies including assembly modeling with a LEGO® MINDSTORMS® Education Base Set, with a TETRIX® kit and a VEX Robot Kit • How to perform basic finite element stress analysis using Inventor Stress Analysis Module Who this book is for This book is designed for high school and college age students wanting to learn the fundamentals of computer aided design with AutoCAD and Inventor and how the two can be used together. No prior CAD experience is required. Table of Contents Introduction: Getting Started 1. Fundamentals of AutoCAD 2. Basic Object Construction and Dynamic Input - AutoCAD 3. Geometric Construction and Editing Tools - AutoCAD 4. Orthographic Views in Multiview Drawings - AutoCAD 5. Basic Dimensioning and Notes - AutoCAD 6. Pictorials and Sketching 7. Parametric Modeling Fundamentals - Autodesk Inventor 8. Constructive Solid Geometry Concepts - Autodesk Inventor 9. Model History Tree - Autodesk Inventor 10. Parametric Constraints Fundamentals - Autodesk Inventor 11. Geometric Construction Tools - Autodesk Inventor 12. Parent/Child Relationships and the BORN Technique - Autodesk Inventor 13. Part Drawings and 3D Model-Based Definition - Autodesk Inventor 14. Symmetrical Features in Design - Autodesk Inventor 15. Design Reuse Using AutoCAD and Autodesk Inventor 16. Assembly Modeling - Putting It All Together - Autodesk Inventor 17. Design Analysis - Autodesk Inventor Stress Analysis Module

Download or read book Up and Running with AutoCAD 2013 written by Elliot J. Gindis and published by Academic Press. This book was released on 2012-12-31 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up and Running with AutoCAD 2013 by Elliot Gindis is an easy-to-learn introduction to AutoCAD featuring step-by-step instructions that explain both the why and the how for using this industry standard software package. The book strips away complexities, both real and perceived, and reduces AutoCAD to easy-to-understand basic concepts. All concepts are explained first in theory, and then shown in practice, helping the reader understand what it is they are doing and why, before they do it. The book is divided into three parts, guiding students through the subject matter from the beginning stages of using the software through advanced AutoCAD, including 3D features. Chapters deal with topics such as: layers, colors, linetypes, and properties; text, Mtext, editing, and style; blocks, Wblocks, dynamic blocks, groups, and purge; importing and exporting data; Boolean operations; Dview, walk and fly, animation, and action recording; and lighting and rendering. Also included is an extensive Appendix for each part, detailing additional useful CAD-related information not often found in other text books. In addition, the book contains supporting graphics (screen shots); a summary with a self-test section at the end of each chapter; drawing examples and exercises; and two running "projects" that the student works on as he/she progresses through the chapters . This book will appeal to beginner through advanced users of AutoCAD; architectural engineers, drafting, civil/construction engineers, and mechanical engineers; and students taking drafting/engineering drawing courses in engineering and engineering technology programs. Strips away complexities, both real and perceived and reduces AutoCAD to easy-to-understand basic concepts Teaches only what is essential to operating AutoCAD first, thereby immediately building student confidence All basic commands are documented step-by-step, meaning that what the student needs to type in and how AutoCAD responds is all spelled out in discrete and clear steps with screen shots added as needed Using the author’s extensive multi-industry knowledge of what is important and widely used in practice versus what is not, the material is presented by immediately immersing the student in practical, critically essential knowledge, with no padding of text or filler material All concepts are explained first in theory, and only then is AutoCAD introduced and the actual "button pushing" discussed. This is one of the key concepts in having students understand exactly what it is they are doing and why, before they do it

Download or read book Tools for Design Using AutoCAD 2016 and Autodesk Inventor 2016 written by Randy Shih and published by SDC Publications. This book was released on 2015 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tools for Design is intended to provide the user with an overview of computer aided design using two popular CAD software packages from Autodesk: AutoCAD and Autodesk Inventor. This book explores the strengths of each package and shows how they can be used in design, both separately and in combination with each other.

Download or read book Mastering Autodesk Inventor and Autodesk Inventor LT 2011 written by Curtis Waguespack and published by John Wiley & Sons. This book was released on 2010-07-28 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expert authors Curtis Waguespack and Thom Tremblay developed this detailed reference and tutorial with straightforward explanations, real-world examples, and practical tutorials that focus squarely on teaching Inventor tips, tricks, and techniques. The authors extensive experience across industries and their Inventor expertise allows them to teach the software in the context of real-world workflows and work environments. They present topics that are poorly documented elsewhere, such as design tactics for large assemblies, effective model design for different industries, strategies for effective data and asset sharing across teams, using 2D and 3D data from other CAD systems, and improving designs by incorporating engineering principles. Mastering Inventor 2011 begins with an overview of Inventor design concepts and application before exploring all aspects of part design, including sketching, basic and advanced modeling techniques, working with sheet metal, and part editing. The book then looks at assemblies and subassemblies, explaining real-world workflows and offering extensive detail on working with large assemblies. Weldment design is detailed next before the reader is introduced to the functional design using Design Accelerators and Design Calculators. The detailed documentation chapter then covers everything from presentation files to simple animations to documentation for exploded views, sheet metal flat patterns, and more. The following chapters explore crucial productivity-boosting tools, data exchange, the Frame Generator, and the Inventor Studio visualization tools. Finally, the book explores Inventor Professional's dynamic simulation and stress analysis features as well as the routed systems features (piping, tubing, cabling, and harnesses). Mastering Inventor's detailed discussions are reinforced with step-by-step tutorials, and readers can compare their work to the downloadable before-and-after tutorial files. It also features content to help readers pass the Inventor 2011 Certified Associate and Certified Professional exams and will feature instructor support materials appropriate for use in both the training and higher education channels. Mastering Inventor is the ultimate resource for those who want to quickly become proficient with Autodesk's 3D manufacturing software and prepare for the Inventor certification exams.

Download or read book Tools for Design Using AutoCAD 2021 and Autodesk Inventor 2021 written by Randy Shih and published by SDC Publications. This book was released on 2019-08 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tools for Design is intended to provide you with an overview of computer aided design using two popular CAD software packages from Autodesk: AutoCAD and Autodesk Inventor. This book explores the strengths of each package and shows how they can be used in design, both separately and in combination with each other. What you'll learn How to create and dimension 2D multiview drawings using AutoCAD How to freehand sketch using axonometric, oblique and perspective projection techniques How to create 3D parametric models and 2D multiview drawings using Autodesk Inventor How to reuse design information between AutoCAD and Autodesk Inventor How to combine parts into assemblies including assembly modeling with a LEGO® MINDSTORMS® Education Base Set, with a TETRIX® kit and a VEX Robot Kit How to perform basic finite element stress analysis using Inventor Stress Analysis Module Who this book is for This book is designed for high school and college age students wanting to learn the fundamentals of computer aided design with AutoCAD and Inventor and how the two can be used together. No prior CAD experience is required.

Download or read book AutoCAD 2013 Tutorial First Level 2D Fundamentals written by Randy H. Shih and published by SDC Publications. This book was released on 2012-04-27 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of AutoCAD 2013 Tutorial - First Level: 2D Fundamentals is to introduce the aspects of Computer Aided Design and Drafting (CADD). This text is intended to be used as a training guide for students and professionals. This text covers AutoCAD 2013 and the lessons proceed in a pedagogical fashion to guide you from constructing basic shapes to making multiview drawings. The lessons are further reinforced by the video presentations found on the enclosed multimedia DVD. This textbook contains a series of eleven tutorial style lessons designed to introduce beginning CAD users to AutoCAD 2013. It takes a hands-on, exercise-intensive approach to all the important 2D CAD techniques and concepts. This text is also helpful to AutoCAD users upgrading from a previous release of the software. The new improvements and key enhancements of the software are incorporated into the lessons. The 2D-CAD techniques and concepts discussed in this text are also designed to serve as the foundation to the more advanced parametric feature-based CAD packages such as Autodesk Inventor. The basic premise of this book is that the more designs you create using AutoCAD 2013, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book is intended to help readers establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

Download or read book Tools for Design Using AutoCAD 2020 and Autodesk Inventor 2020 written by Randy Shih and published by SDC Publications. This book was released on 2019-07 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tools for Design is intended to provide the user with an overview of computer aided design using two popular CAD software packages from Autodesk: AutoCAD and Autodesk Inventor. This book explores the strengths of each package and shows how they can be used in design, both separately and in combination with each other. What you'll learn • How to create and dimension 2D multiview drawings using AutoCAD • How to freehand sketch using axonometric, oblique and perspective projection techniques • How to create 3D parametric models and 2D multiview drawings using Autodesk Inventor • How to reuse design information between AutoCAD and Autodesk Inventor • How to combine parts into assemblies including assembly modeling with a LEGO® MINDSTORMS® Education Base Set, with a TETRIX® kit and a VEX Robot Kit • How to perform basic finite element stress analysis using Inventor Stress Analysis Module Who this book is for This book is designed for high school and college age students wanting to learn the fundamentals of computer aided design with AutoCAD and Inventor and how the two can be used together. No prior CAD experience is required.

Download or read book Autodesk Inventor Exercises written by Bob McFarlane and published by Taylor & Francis. This book was released on 2017-04-07 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical resource provides a series of Inventor® exercises covering several topics, including: sketches part models assemblies drawing layouts presentations sheet metal design welding for users with some familiarity with Autodesk® Inventor, or other similar feature-based modelling software such as Solid Works ®, CATIA ®, Pro/ENGINEER and Creo Parametric, and who want to become proficient. Exercises are set out in a structured way and are suitable for releases of Inventor from versions 7 to 13.