Download or read book Extractive Metallurgy of Titanium written by Zhigang Zak Fang and published by Elsevier. This book was released on 2019-11-08 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extractive Metallurgy of Titanium: Conventional and Recent Advances in Extraction and Production of Titanium Metal contains information on current and developing processes for the production of titanium. The methods for producing Ti metal are grouped into two categories, including the reduction of TiCl4 and the reduction of TiO2, with their processes classified as either electrochemical or thermochemical. Descriptions of each method or process include both the fundamental principles of the method and the engineering challenges in their practice. In addition, a review of the chemical and physical characteristics of the product produced by each method is included. Sections cover the purity of titanium metal produced based on ASTM and other industry standards, energy consumption, cost and the potential environmental impacts of the processes. - Provides information on new and developing low cost, high integrity methods for titanium metal production - Discusses new markets for titanium due to the decreased cost of newly developed processes - Covers specific information on new methods, including the chemical and physical characteristics produced

Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. - Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy - Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. - Includes a critical review of the current key fundamental and technical issues of Ti PM. - Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys

Download or read book Titanium written by Gerd Lütjering and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors were motivated to prepare this book by the absence of any recent comprehensive book on titanium. The intent of this book is to provide a modern compendium that addresses both the phyical metallurgy as well as the applications of titanium. Until now the only book on this subject is that by Zwicker which was written in German and published almost 30 years ago. Chapter 1 is an introduction to the subject including some historical aspects of titanium. Chapter 2 is a s- mary of the Fundamental Aspects of Titanium, Chapter 3 is a summary of the Technological Aspects of Titanium and Chapters 4 through 9 address the specifics of the various classes of titanium ranging from CP Titanium to Titanium Matrix Composites. Finally, Chapter 10 covers “special” properties and applications of titanium. Our intent has been to address the subject conceptually rather than provide quantities of data of the sort that would be found in a Handbook. It is our intent that this book is useful for materials scientists and engineers interested in using titanium and for students either as a sourcebook or as a textbook. We have - tempted to include a representative set of references which provide additional detail for readers interested in specific aspects of titanium. Because of the re- tively recent growth of the technological importance of titanium, there is a vo- minous literature on titanium. While our references span this literature it has proven impossible to mention every contribution.

Download or read book Titanium Physical Metallurgy Processing and Applications written by F.H. Froes and published by ASM International. This book was released on 2015-02-01 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book covers all aspects of the history, physical metallurgy, corrosion behavior, cost factors and current and potential uses of titanium. The history of titanium is traced from its early beginnings through the work of Kroll, to the present day broadening market place. Extensive detail on extraction processes is discussed, as well as the various beta to alpha transformations and details of the powder metallurgy techniques.

Download or read book Review of Extraction Processing Properties and Applications of Reactive Metals written by Brajendra Mishra and published by John Wiley & Sons. This book was released on 2013-10-21 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume from the 1999 TMS Annual Meeting is intended to serve as a compendium on reactive metals. Specifically, this book concentrates on zirconium, hafnium, molybdenum, niobium, beryllium, and titanium. Covering different aspects of extraction and recovery, metal refining, processing, and current and potential applications of these metals, this volume serves as a valuable reference source on reactive metals.

Download or read book Hydrometallurgy of Rare Earths written by Dezhi Qi and published by Elsevier. This book was released on 2018-05-15 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrometallurgy of Rare Earths: Extraction and Separation provides the basic knowledge for rare earth extraction and separation, including flow sheet selection criteria and related technology. The book includes the latest research findings on all rare earth separation processes, methods of controlling operation costs, and strategies that help lower wastewater and waste solid discharge. It discusses many real process parameters and actual situations in rare earth separation plants, also examining the basic principles, technologies, process parameters and advances and achievements in the area of rare earth extraction and separation. In addition, the book covers extraction separation theory as developed by Professor Guanxian Xu and Professor Chunhua Yan and the creative use of a computational simulation program to replace the bench scale and pilot plant tests and directly design rare earth extraction separation processes. - Outlines the theory of solvent extraction and separation of rare earths (REs) - Provides the necessary tools for a REs separation plant design - Includes a unique simulation program for the calculation of all process parameters - Includes Chinese nomenclature that is useful for identifying the various processes, also comparing it to the global literature

Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.

Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 4024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.

Download or read book Powder Metallurgy of Titanium written by Ma Qian and published by Trans Tech Publications Ltd. This book was released on 2012-08-24 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder Processing, Consolidation and Metallurgy of Titanium Selected, peer reviewed papers from the Symposium on Powder Processing and Metallurgy of Titanium, December 4-7, 2011, Brisbane, Australia

Download or read book Aerospace Materials and Material Technologies written by N. Eswara Prasad and published by Springer. This book was released on 2016-11-11 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive compilation of chapters on materials (both established and evolving) and material technologies that are important for aerospace systems. It considers aerospace materials in three Parts. Part I covers Metallic Materials (Mg, Al, Al-Li, Ti, aero steels, Ni, intermetallics, bronzes and Nb alloys); Part II deals with Composites (GLARE, PMCs, CMCs and Carbon based CMCs); and Part III considers Special Materials. This compilation has ensured that no important aerospace material system is ignored. Emphasis is laid in each chapter on the underlying scientific principles as well as basic and fundamental mechanisms leading to processing, characterization, property evaluation and applications. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.

Download or read book Titanium Dioxide TiO2 and Its Applications written by Francesco Parrino and published by Elsevier. This book was released on 2020-11-29 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific interest in TiO2-based materials has exponentially grown in the last few decades. Titanium Dioxide (TiO2) and Its Applications introduces the main physicochemical properties of TiO2 which are the basis of its applications in various fields. While the basic principles of the TiO2 properties have been the subject of various previous publications, this book is mainly devoted to TiO2 applications. The book includes contributions written by experts from a wide range of disciplines in order to address titanium dioxide's utilization in energy, consumer, materials, devices, and catalytic applications. The various applications identified include: photocatalysis, catalysis, optics, electronics, energy storage and production, ceramics, pigments, cosmetics, sensors, and heat transfer. Titanium Dioxide (TiO2) and Its Applications is suitable for a wide readership in the disciplines of materials science, chemistry, and engineering in both academia and industry. - Includes a wide range of current and emerging applications of titanium dioxide in the fields of energy, consumer applications, materials, and devices - Provides a brief overview of titanium dioxide and its properties, as well as techniques to design, deposit, and study the material - Discusses the relevant properties, preparation methods, and other apposite considerations in each application-focused chapter

Download or read book Joining of Titanium written by Robert Edward Monroe and published by . This book was released on 1967 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report supplies information on joining processes applicable to titanium and its alloys in sheet metal applications, primarily related directly to airframe construction. Although the material presented here does not cover all titanium joining processes, and omits such processes as plasma-arc, submerged-arc, electroslag, flash, and high-frequency resistance welding, the data presented cover materials up to 2-inches thick in some cases and the report should be useful to anyone seeking titanium joining information. The joining processes covered fall into five categories: welding, brazing, metallurgical bonding (diffusion and deformation bonding), adhesive bonding, and mechanical fastening. The fusion welding processes that are discussed in detail include gas tungsten arc, gas metal arc, arc spot, and electron beam. The resistance processes give extended coverage are spot, roll spot, and seam welding. (Author).

Download or read book Additives for Plastics Handbook written by J. Murphy and published by Elsevier. This book was released on 2001-11-22 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both technically and economically, additives form a large and increasingly significant part of the polymer industry, both plastics and elastomers. Since the first edition of this book was published, there have been wide-ranging developments, covering chemistry and formulation of new and more efficient additive systems and the safer use of additives, both by processors in the factory and, in the wider field, as they affect the general public. This new edition follows the successful formula of its predecessor, it provides a comprehensive view of all types of additives, concentrating mainly on their technical aspects (chemistry/formulation, structure, function, main applications) with notes on the commercial background of each. The field has been expanded to include any substance that is added to a polymer to improve its use, so including reinforcing materials (such as glass fibre), carbon black and titanium dioxide. This is a book which has been planned for ease of use and the information is presented in a way which is appropriate to the users' needs.

Download or read book Advances in Molten Slags Fluxes and Salts written by Ramana Reddy and published by Springer. This book was released on 2017-01-10 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on ferrous and non-ferrous metallurgy where ionic melts, slags, fluxes, or salts play important roles in industrial growth and economy worldwide. Technical topics included are: thermodynamic properties and phase diagrams and kinetics of slags, fluxes, and salts; physical properties of slags, fluxes, and salts; structural studies of slags; interfacial and process phenomena involving foaming, bubble formation, and drainage; slag recycling, refractory erosion/corrosion, and freeze linings; and recycling and utilization of metallurgical slags and models and their applications in process improvement and optimization. These topics are of interest to not only traditional ferrous and non-ferrous metal industrial processes but also new and upcoming technologies.

Download or read book Handbook of Non Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2009-02-24 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacture and use of the powders of non-ferrous metals has been taking place for many years in what was previously Soviet Russia, and a huge amount of knowledge and experience has built up in that country over the last forty years or so. Although accounts of the topic have been published in the Russian language, no English language account has existed until now.Six prominent academics and industrialists from the Ukraine and Russia have produced this highly-detailed account which covers the classification, manufacturing methods, treatment and properties of the non-ferrous metals ( aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, lead, tin, bismuth, noble metals and earth metals).The result is a formidable reference source for those in all aspects of the metal powder industry. - Covers the manufacturing methods, properties and importance of the following metals: aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth - Expert Russian team of authors, all very experienced - English translation and update of book previously published in Russian

Download or read book Mining and Processing Residues written by Olga Chernoburova and published by Elsevier. This book was released on 2023-08-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mining and Processing Residues: Future's Source of Critical Raw Materials provides a comprehensive review of principal aspects of CRM-containing residues re-processing, including available sampling and analytical techniques, the latest available processing technologies, authorization and legal matters, and analysis of environmental, social, and economic impacts. Suitable for academic researchers, practicing engineers and students, the book is aimed at giving a complete and multilateral view of CRM recovery from the residues. - Includes the most relevant techniques for residue sampling and characterization; - Describes most recent technologies applicable for residue re-processing; - Covers authorization and legal aspects of residue storage and re-processing; - Includes extensive case studies; - Analyzes environmental, social and economic impacts of residue re-processing.

Download or read book Microstructure Evolution in Metal Forming Processes written by J Lin and published by Elsevier. This book was released on 2012-07-09 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monitoring and control of microstructure evolution in metal processing is essential in developing the right properties in a metal. Microstructure evolution in metal forming processes summarises the wealth of recent research on the mechanisms, modelling and control of microstructure evolution during metal forming processes.Part one reviews the general principles involved in understanding and controlling microstructure evolution in metal forming. Techniques for modelling microstructure and optimising processes are explored, along with recrystallisation, grain growth, and severe plastic deformation. Microstructure evolution in the processing of steel is the focus of part two, which reviews the modelling of phase transformations in steel, unified constitutive equations and work hardening in microalloyed steels. Part three examines microstructure evolution in the processing of other metals, including ageing behaviour in the processing of aluminium and microstructure control in processing nickel, titanium and other special alloys.With its distinguished editors and international team of expert contributors, Microstructure evolution in metal forming processes is an invaluable reference tool for metal processors and those using steels and other metals, as well as an essential guide for academics and students involved in fundamental metal research. - Summarises the wealth of recent research on the mechanisms, modelling and control of microstructure evolution during metal forming processes - Comprehensively discusses microstructure evolution in the processing of steel and reviews the modelling of phase transformations in steel, unified constitutive equations and work hardening in microalloyed steels - Examines microstructure evolution in the processing of other materials, including ageing behaviour in the processing of aluminium