Download or read book The Art of Timing Closure written by Khosrow Golshan and published by Springer Nature. This book was released on 2020-08-03 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Art of Timing Closure is written using a hands-on approach to describe advanced concepts and techniques using Multi-Mode Multi-Corner (MMMC) for an advanced ASIC design implementation. It focuses on the physical design, Static Timing Analysis (STA), formal and physical verification. The scripts in this book are based on Cadence® Encounter SystemTM. However, if the reader uses a different EDA tool, that tool’s commands are similar to those shown in this book. The topics covered are as follows: Data Structures Multi-Mode Multi-Corner Analysis Design Constraints Floorplan and Timing Placement and Timing Clock Tree Synthesis Final Route and Timing Design Signoff Rather than go into great technical depth, the author emphasizes short, clear descriptions which are implemented by references to authoritative manuscripts. It is the goal of this book to capture the essence of physical design and timing analysis at each stage of the physical design, and to show the reader that physical design and timing analysis engineering should be viewed as a single area of expertise. This book is intended for anyone who is involved in ASIC design implementation -- starting from physical design to final design signoff. Target audiences for this book are practicing ASIC design implementation engineers and students undertaking advanced courses in ASIC design.

Download or read book VLSI Physical Design From Graph Partitioning to Timing Closure written by Andrew B. Kahng and published by Springer Nature. This book was released on 2022-06-14 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexity of modern chip design requires extensive use of specialized software throughout the process. To achieve the best results, a user of this software needs a high-level understanding of the underlying mathematical models and algorithms. In addition, a developer of such software must have a keen understanding of relevant computer science aspects, including algorithmic performance bottlenecks and how various algorithms operate and interact. This book introduces and compares the fundamental algorithms that are used during the IC physical design phase, wherein a geometric chip layout is produced starting from an abstract circuit design. This updated second edition includes recent advancements in the state-of-the-art of physical design, and builds upon foundational coverage of essential and fundamental techniques. Numerous examples and tasks with solutions increase the clarity of presentation and facilitate deeper understanding. A comprehensive set of slides is available on the Internet for each chapter, simplifying use of the book in instructional settings. “This improved, second edition of the book will continue to serve the EDA and design community well. It is a foundational text and reference for the next generation of professionals who will be called on to continue the advancement of our chip design tools and design the most advanced micro-electronics.” Dr. Leon Stok, Vice President, Electronic Design Automation, IBM Systems Group “This is the book I wish I had when I taught EDA in the past, and the one I’m using from now on.” Dr. Louis K. Scheffer, Howard Hughes Medical Institute “I would happily use this book when teaching Physical Design. I know of no other work that’s as comprehensive and up-to-date, with algorithmic focus and clear pseudocode for the key algorithms. The book is beautifully designed!” Prof. John P. Hayes, University of Michigan “The entire field of electronic design automation owes the authors a great debt for providing a single coherent source on physical design that is clear and tutorial in nature, while providing details on key state-of-the-art topics such as timing closure.” Prof. Kurt Keutzer, University of California, Berkeley “An excellent balance of the basics and more advanced concepts, presented by top experts in the field.” Prof. Sachin Sapatnekar, University of Minnesota

Download or read book Static Timing Analysis for Nanometer Designs written by J. Bhasker and published by Springer Science & Business Media. This book was released on 2009-04-03 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: iming, timing, timing! That is the main concern of a digital designer charged with designing a semiconductor chip. What is it, how is it T described, and how does one verify it? The design team of a large digital design may spend months architecting and iterating the design to achieve the required timing target. Besides functional verification, the t- ing closure is the major milestone which dictates when a chip can be - leased to the semiconductor foundry for fabrication. This book addresses the timing verification using static timing analysis for nanometer designs. The book has originated from many years of our working in the area of timing verification for complex nanometer designs. We have come across many design engineers trying to learn the background and various aspects of static timing analysis. Unfortunately, there is no book currently ava- able that can be used by a working engineer to get acquainted with the - tails of static timing analysis. The chip designers lack a central reference for information on timing, that covers the basics to the advanced timing veri- cation procedures and techniques.

Download or read book Timing Closure in Chip Design written by Stephan Held and published by . This book was released on 2008 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Constraining Designs for Synthesis and Timing Analysis written by Sridhar Gangadharan and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a hands-on guide to timing constraints in integrated circuit design. Readers will learn to maximize performance of their IC designs, by specifying timing requirements correctly. Coverage includes key aspects of the design flow impacted by timing constraints, including synthesis, static timing analysis and placement and routing. Concepts needed for specifying timing requirements are explained in detail and then applied to specific stages in the design flow, all within the context of Synopsys Design Constraints (SDC), the industry-leading format for specifying constraints.

Download or read book Timing Analysis and Simulation for Signal Integrity Engineers written by Greg Edlund and published by Pearson Education. This book was released on 2007-10-22 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every day, companies call upon their signal integrity engineers to make difficult decisions about design constraints and timing margins. Can I move these wires closer together? How many holes can I drill in this net? How far apart can I place these chips? Each design is unique: there’s no single recipe that answers all the questions. Today’s designs require ever greater precision, but design guides for specific digital interfaces are by nature conservative. Now, for the first time, there’s a complete guide to timing analysis and simulation that will help you manage the tradeoffs between signal integrity, performance, and cost. Writing from the perspective of a practicing SI engineer and team lead, Greg Edlund of IBM presents deep knowledge and quantitative techniques for making better decisions about digital interface design. Edlund shares his insights into how and why digital interfaces fail, revealing how fundamental sources of pathological effects can combine to create fault conditions. You won’t just learn Edlund’s expert techniques for avoiding failures: you’ll learn how to develop the right approach for your own projects and environment. Coverage includes • Systematically ensure that interfaces will operate with positive timing margin over the product’s lifetime–without incurring excess cost • Understand essential chip-to-chip timing concepts in the context of signal integrity • Collect the right information upfront, so you can analyze new designs more effectively • Review the circuits that store information in CMOS state machines–and how they fail • Learn how to time common-clock, source synchronous, and high-speed serial transfers • Thoroughly understand how interconnect electrical characteristics affect timing: propagation delay, impedance profile, crosstalk, resonances, and frequency-dependent loss • Model 3D discontinuities using electromagnetic field solvers • Walk through four case studies: coupled differential vias, land grid array connector, DDR2 memory data transfer, and PCI Express channel • Appendices present a refresher on SPICE modeling and a high-level conceptual framework for electromagnetic field behavior Objective, realistic, and practical, this is the signal integrity resource engineers have been searching for. Preface xiii Acknowledgments xvi About the Author xix About the Cover xx Chapter 1: Engineering Reliable Digital Interfaces 1 Chapter 2: Chip-to-Chip Timing 13 Chapter 3: Inside IO Circuits 39 Chapter 4: Modeling 3D Discontinuities 73 Chapter 5: Practical 3D Examples 101 Chapter 6: DDR2 Case Study 133 Chapter 7: PCI Express Case Study 175 Appendix A: A Short CMOS and SPICE Primer 209 Appendix B: A Stroll Through 3D Fields 219 Endnotes 233 Index 235

Download or read book FPGA Design written by Philip Andrew Simpson and published by Springer. This book was released on 2015-05-19 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes best practices for successful FPGA design. It is the result of the author’s meetings with hundreds of customers on the challenges facing each of their FPGA design teams. By gaining an understanding into their design environments, processes, what works and what does not work, key areas of concern in implementing system designs have been identified and a recommended design methodology to overcome these challenges has been developed. This book’s content has a strong focus on design teams that are spread across sites. The goal being to increase the productivity of FPGA design teams by establishing a common methodology across design teams; enabling the exchange of design blocks across teams. Coverage includes the complete FPGA design flow, from the basics to advanced techniques. This new edition has been enhanced to include new sections on System modeling, embedded design and high level design. The original sections on Design Environment, RTL design and timing closure have all been expanded to include more up to date techniques as well as providing more extensive scripts and RTL code that can be reused by readers. Presents complete, field-tested methodology for FPGA design, focused on reuse across design teams; Offers best practices for FPGA timing closure, in-system debug, and board design; Details techniques to resolve common pitfalls in designing with FPGAs.

Download or read book Timing written by Sachin Sapatnekar and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statistical timing analysis is an area of growing importance in nanometer te- nologies‚ as the uncertainties associated with process and environmental var- tions increase‚ and this chapter has captured some of the major efforts in this area. This remains a very active field of research‚ and there is likely to be a great deal of new research to be found in conferences and journals after this book is published. In addition to the statistical analysis of combinational circuits‚ a good deal of work has been carried out in analyzing the effect of variations on clock skew. Although we will not treat this subject in this book‚ the reader is referred to [LNPS00‚ HN01‚ JH01‚ ABZ03a] for details. 7 TIMING ANALYSIS FOR SEQUENTIAL CIRCUITS 7.1 INTRODUCTION A general sequential circuit is a network of computational nodes (gates) and memory elements (registers). The computational nodes may be conceptualized as being clustered together in an acyclic network of gates that forms a c- binational logic circuit. A cyclic path in the direction of signal propagation 1 is permitted in the sequential circuit only if it contains at least one register . In general, it is possible to represent any sequential circuit in terms of the schematic shown in Figure 7.1, which has I inputs, O outputs and M registers. The registers outputs feed into the combinational logic which, in turn, feeds the register inputs. Thus, the combinational logic has I + M inputs and O + M outputs.

Download or read book Three Dimensional Integrated Circuit Design written by Vasilis F. Pavlidis and published by Newnes. This book was released on 2017-07-04 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Integrated Circuit Design, Second Eition, expands the original with more than twice as much new content, adding the latest developments in circuit models, temperature considerations, power management, memory issues, and heterogeneous integration. 3-D IC experts Pavlidis, Savidis, and Friedman cover the full product development cycle throughout the book, emphasizing not only physical design, but also algorithms and system-level considerations to increase speed while conserving energy. A handy, comprehensive reference or a practical design guide, this book provides effective solutions to specific challenging problems concerning the design of three-dimensional integrated circuits. Expanded with new chapters and updates throughout based on the latest research in 3-D integration: Manufacturing techniques for 3-D ICs with TSVs Electrical modeling and closed-form expressions of through silicon vias Substrate noise coupling in heterogeneous 3-D ICs Design of 3-D ICs with inductive links Synchronization in 3-D ICs Variation effects on 3-D ICs Correlation of WID variations for intra-tier buffers and wires Offers practical guidance on designing 3-D heterogeneous systems Provides power delivery of 3-D ICs Demonstrates the use of 3-D ICs within heterogeneous systems that include a variety of materials, devices, processors, GPU-CPU integration, and more Provides experimental case studies in power delivery, synchronization, and thermal characterization

Download or read book Skew Tolerant Circuit Design written by David Harris and published by Morgan Kaufmann. This book was released on 2001 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapter 1 -- Introduction -- Chapter 2 -- Fundamental Concepts -- Chapter 3 -- IP Switching -- Chapter 4 -- Tag Switching -- Chapter 5 -- MPLS Core Protocols -- Chapter 6 -- Quality of Service -- Chapter 7 -- ConstraintƯbased routing -- Chapter 8 -- Virtual Private Networks.

Download or read book Physical Design Essentials written by Khosrow Golshan and published by Springer Science & Business Media. This book was released on 2007-04-08 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Arranged in a format that follows the industry-common ASIC physical design flow, Physical Design Essentials begins with general concepts of an ASIC library, then examines floorplanning, placement, routing, verification, and finally, testing. Among the topics covered are Basic standard cell design, transistor-sizing, and layout styles; Linear, non-linear, and polynomial characterization; Physical design constraints and floorplanning styles; Algorithms used for placement; Clock Tree Synthesis; Parasitic extraction; Electronic Testing, and many more.

Download or read book Timing Analysis and Optimization of Sequential Circuits written by Naresh Maheshwari and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have seen rapid strides in the level of sophistication of VLSI circuits. On the performance front, there is a vital need for techniques to design fast, low-power chips with minimum area for increasingly complex systems, while on the economic side there is the vastly increased pressure of time-to-market. These pressures have made the use of CAD tools mandatory in designing complex systems. Timing Analysis and Optimization of Sequential Circuits describes CAD algorithms for analyzing and optimizing the timing behavior of sequential circuits with special reference to performance parameters such as power and area. A unified approach to performance analysis and optimization of sequential circuits is presented. The state of the art in timing analysis and optimization techniques is described for circuits using edge-triggered or level-sensitive memory elements. Specific emphasis is placed on two methods that are true sequential timing optimizations techniques: retiming and clock skew optimization. Timing Analysis and Optimization of Sequential Circuits covers the following topics: Algorithms for sequential timing analysis Fast algorithms for clock skew optimization and their applications Efficient techniques for retiming large sequential circuits Coupling sequential and combinational optimizations. Timing Analysis and Optimization of Sequential Circuits is written for graduate students, researchers and professionals in the area of CAD for VLSI and VLSI circuit design.

Download or read book Advanced ASIC Chip Synthesis written by Himanshu Bhatnagar and published by Springer Science & Business Media. This book was released on 2012-11-11 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced ASIC Chip Synthesis: Using Synopsys® Design Compiler® and PrimeTime® describes the advanced concepts and techniques used for ASIC chip synthesis, formal verification and static timing analysis, using the Synopsys suite of tools. In addition, the entire ASIC design flow methodology targeted for VDSM (Very-Deep-Sub-Micron) technologies is covered in detail. The emphasis of this book is on real-time application of Synopsys tools used to combat various problems seen at VDSM geometries. Readers will be exposed to an effective design methodology for handling complex, sub-micron ASIC designs. Significance is placed on HDL coding styles, synthesis and optimization, dynamic simulation, formal verification, DFT scan insertion, links to layout, and static timing analysis. At each step, problems related to each phase of the design flow are identified, with solutions and work-arounds described in detail. In addition, crucial issues related to layout, which includes clock tree synthesis and back-end integration (links to layout) are also discussed at length. Furthermore, the book contains in-depth discussions on the basics of Synopsys technology libraries and HDL coding styles, targeted towards optimal synthesis solutions. Advanced ASIC Chip Synthesis: Using Synopsys® Design Compiler® and PrimeTime® is intended for anyone who is involved in the ASIC design methodology, starting from RTL synthesis to final tape-out. Target audiences for this book are practicing ASIC design engineers and graduate students undertaking advanced courses in ASIC chip design and DFT techniques. From the Foreword: `This book, written by Himanshu Bhatnagar, provides a comprehensive overview of the ASIC design flow targeted for VDSM technologies using the Synopsis suite of tools. It emphasizes the practical issues faced by the semiconductor design engineer in terms of synthesis and the integration of front-end and back-end tools. Traditional design methodologies are challenged and unique solutions are offered to help define the next generation of ASIC design flows. The author provides numerous practical examples derived from real-world situations that will prove valuable to practicing ASIC design engineers as well as to students of advanced VLSI courses in ASIC design'. Dr Dwight W. Decker, Chairman and CEO, Conexant Systems, Inc., (Formerly, Rockwell Semiconductor Systems), Newport Beach, CA, USA.

Download or read book Advanced HDL Synthesis and SOC Prototyping written by Vaibbhav Taraate and published by Springer. This book was released on 2018-12-15 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes RTL design using Verilog, synthesis and timing closure for System On Chip (SOC) design blocks. It covers the complex RTL design scenarios and challenges for SOC designs and provides practical information on performance improvements in SOC, as well as Application Specific Integrated Circuit (ASIC) designs. Prototyping using modern high density Field Programmable Gate Arrays (FPGAs) is discussed in this book with the practical examples and case studies. The book discusses SOC design, performance improvement techniques, testing and system level verification, while also describing the modern Intel FPGA/XILINX FPGA architectures and their use in SOC prototyping. Further, the book covers the Synopsys Design Compiler (DC) and Prime Time (PT) commands, and how they can be used to optimize complex ASIC/SOC designs. The contents of this book will be useful to students and professionals alike.

Download or read book A Practical Approach to VLSI System on Chip SoC Design written by Veena S. Chakravarthi and published by Springer Nature. This book was released on 2022-12-13 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in a thoroughly revised second edition, this practical practitioner guide provides a comprehensive overview of the SoC design process. It explains end-to-end system on chip (SoC) design processes and includes updated coverage of design methodology, the design environment, EDA tool flow, design decisions, choice of design intellectual property (IP) cores, sign-off procedures, and design infrastructure requirements. The second edition provides new information on SOC trends and updated design cases. Coverage also includes critical advanced guidance on the latest UPF-based low power design flow, challenges of deep submicron technologies, and 3D design fundamentals, which will prepare the readers for the challenges of working at the nanotechnology scale. A Practical Approach to VLSI System on Chip (SoC) Design: A Comprehensive Guide, Second Edition provides engineers who aspire to become VLSI designers with all the necessary information and details of EDA tools. It will be a valuable professional reference for those working on VLSI design and verification portfolios in complex SoC designs

Download or read book VLSI Circuit Design Methodology Demystified written by Liming Xiu and published by John Wiley & Sons. This book was released on 2007-12-04 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was written to arm engineers qualified and knowledgeable in the area of VLSI circuits with the essential knowledge they need to get into this exciting field and to help those already in it achieve a higher level of proficiency. Few people truly understand how a large chip is developed, but an understanding of the whole process is necessary to appreciate the importance of each part of it and to understand the process from concept to silicon. It will teach readers how to become better engineers through a practical approach of diagnosing and attacking real-world problems.

Download or read book Timing Verification of Application specific Integrated Circuits ASICs written by Farzad Nekoogar and published by . This book was released on 1999 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: PLEASE PROVIDE COURSE INFORMATION PLEASE PROVIDE