Download or read book Time Scale Analysis Techniques for Flexible Manufacturing Systems written by Carl Adam Caromicoli and published by . This book was released on 1987 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis uses results on the aggregation of singularly perturbed Markov chains to analyze manufacturing systems. The basis for this analysis is the presence in the system of events and processes that occur at markedly different rates - operations on machines, set-ups, failures and repairs, etc. The result of the analysis is a set of models, each far simpler than the full model, describing system behavior over different time horizons. In addition, a new theoretical result is presented on the computation of asymptotic rates of particular events in perturbed Markov processes, where an event may correspond to the occurrence of one of several transitions in the process. This result is used to compute effective production rates at different time scales, taking into account the occurrence of set-ups and failures.
Download or read book Flexible Manufacturing Systems written by Horst Tempelmeier and published by Wiley-Interscience. This book was released on 1993-10-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now, this comprehensive and systematic overview of both the design models and quantitative solution methods for FMS support, configuration, and operation rectifies that problem. Students, production managers/planners, and FMS installation planners can now find everything they need in one authoritative and up-to-date source.
Download or read book Handbook of Flexible Manufacturing Systems written by Nand K. Jha and published by Academic Press. This book was released on 2012-12-02 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a compilation of the current practical knowledge of flexible manufacturing systems (FMS). FMS allow manufacturing plants of all sizes to reduce their inventory while increasing their ability to meet consumer demands. By controlling automatic guided vehicles, robots, and machine tools with one central computer, products can now be produced in a variety of styles and models all at the same time. FMS are designed to adapt quickly and economically to changes in requirements and to unpredictable events. This guide explains how to effectively employ these useful new systems. Includes specifications for software to implement simulation modeling Surveys practical applications in the workplace Presents materials in a step-by-step workbook style
Download or read book Computer control of flexible manufacturing systems written by Sanjay B. Joshi and published by Springer Science & Business Media. This book was released on 1994-07-31 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the approach of the 21st century, and the current trends in manufacturing, the role of computer-controlled flexible manufacturing an integral part in the success of manufacturing enterprises. will take Manufacturing environments are changing to small batch (with batch sizes diminishing to a quantity of one), larger product variety, produc tion on demand with low lead times, with the ability to be 'agile.' This is in stark contrast to conventional manufacturing which has relied on economies of scale, and where change is viewed as a disruption and is therefore detrimental to production. Computer integrated manufac turing (CIM) and flexible manufacturing practices are a key component in the transition from conventional manufacturing to the 'new' manu facturing environment. While the use of computers in manufacturing, from controlling indi vidual machines (NC, Robots, AGVs etc.) to controlling flexible manu facturing systems (FMS) has advanced the flexibility of manufacturing environments, it is still far from reaching its full potential in the environment of the future. Great strides have been made in individual technologies and control of FMS has been the subject of considerable research, but computerized shop floor control is not nearly as flexible or integrated as hyped in industrial and academic literature. In fact, the integrated systems have lagged far behind what could be achieved with existing technology.
Download or read book Design and Analysis of Integrated Manufacturing Systems written by W. Dale Compton and published by National Academies Press. This book was released on 1988-02-01 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Analysis of Integrated Manufacturing Systems is a fresh look at manufacturing from a systems point of view. This collection of papers from a symposium sponsored by the National Academy of Engineering explores the need for new technologies, the more effective use of new tools of analysis, and the improved integration of all elements of manufacturing operations, including machines, information, and humans. It is one of the few volumes to include detailed proposals for research that match the needs of industry.
Download or read book Modeling Simulation and Control of Flexible Manufacturing Systems written by MengChu Zhou and published by World Scientific. This book was released on 1999 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: One critical barrier leading to successful implementation of flexible manufacturing and related automated systems is the ever-increasing complexity of their modeling, analysis, simulation, and control. Research and development over the last three decades has provided new theory and graphical tools based on Petri nets and related concepts for the design of such systems. The purpose of this book is to introduce a set of Petri-net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs), with several implementation examples.There are three ways this book will directly benefit readers. First, the book will allow engineers and managers who are responsible for the design and implementation of modern manufacturing systems to evaluate Petri nets for applications in their work. Second, it will provide sufficient breadth and depth to allow development of Petri-net-based industrial applications. Third, it will allow the basic Petri net material to be taught to industrial practitioners, students, and academic researchers much more efficiently. This will foster further research and applications of Petri nets in aiding the successful implementation of advanced manufacturing systems.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Oata Analysis and Synthesis (CINOAS) * at Purdue. University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 33 (thesis year 1988) a total of 13,273 theses titles from 23 Canadian and 1 85 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 33 reports theses submitted in 1988, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Technical Reports Awareness Circular TRAC written by and published by . This book was released on 1988-06 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiple Time Scale Analysis of Manufacturing Systems written by Carl Adam Caromicoli and published by . This book was released on 1987 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this paper the authors use results on the aggregation of singularly perturbed Markov chains to analyze manufacturing systems. The basis for this analysis is the presence in the system of events and processes that occur at markedly different rates -- operations of machines, set-ups, failures, and repairs, etc. The result of the analysis is a set of models, each far simpler that the full model, describing system behavior over different time horizons. In addition, this document presents a new theoretical result on the computation of asymptotic rates of particular events in perturbed Markov processes, where an event may correspond to the occurrence of the one several transitions in the process. We may apply this result to compute effective production rates at different time scales, taking into account the occurrence of setups and failures.
Download or read book Development and Analysis of Flexible Manufacturing Systems Using a Fixed increment Time Interval Mechanism written by Milton C. Bennett and published by . This book was released on 1991 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Simulation And Control Of Flexible Manufacturing Systems A Petri Net Approach written by Kurapati Venkatesh and published by World Scientific. This book was released on 1999-01-29 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: One critical barrier leading to successful implementation of flexible manufacturing and related automated systems is the ever-increasing complexity of their modeling, analysis, simulation, and control. Research and development over the last three decades has provided new theory and graphical tools based on Petri nets and related concepts for the design of such systems. The purpose of this book is to introduce a set of Petri-net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs), with several implementation examples.There are three ways this book will directly benefit readers. First, the book will allow engineers and managers who are responsible for the design and implementation of modern manufacturing systems to evaluate Petri nets for applications in their work. Second, it will provide sufficient breadth and depth to allow development of Petri-net-based industrial applications. Third, it will allow the basic Petri net material to be taught to industrial practitioners, students, and academic researchers much more efficiently. This will foster further research and applications of Petri nets in aiding the successful implementation of advanced manufacturing systems.
Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.
Download or read book Average Cost Control of Stochastic Manufacturing Systems written by Suresh P. Sethi and published by Springer Science & Business Media. This book was released on 2006-03-22 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book articulates a new theory that shows that hierarchical decision making can in fact lead to a near optimization of system goals. The material in the book cuts across disciplines. It will appeal to graduate students and researchers in applied mathematics, operations management, operations research, and system and control theory.
Download or read book Simulation Approach Towards Energy Flexible Manufacturing Systems written by Jan Beier and published by Springer. This book was released on 2017-03-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authored monograph provides in-depth analysis and methods for aligning electricity demand of manufacturing systems to VRE supply. The book broaches both long-term system changes and real-time manufacturing execution and control, and the author presents a concept with different options for improved energy flexibility including battery, compressed air and embodied energy storage. The reader will also find a detailed application procedure as well as an implementation into a simulation prototype software. The book concludes with two case studies. The target audience primarily comprises research experts in the field of green manufacturing systems.
Download or read book Timed Petri Nets written by Jiacun Wang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Driven by the request for increased productivity, flexibility, and competitiveness, modern civilization increasingly has created high-performance discrete event dynamic systems (DEDSs). These systems exhibit concurrent, sequential, competitive activities among their components. They are often complex and large in scale, and necessarily flexible and thus highly capital-intensive. Examples of systems are manufacturing systems, communication networks, traffic and logistic systems, and military command and control systems. Modeling and performance evaluation play a vital role in the design and operation of such high-performance DEDSs and thus have received widespread attention from researchers over the past two decades. One methodology resulting from this effort is based on timed Petri nets and related graphical and mathematical tools. The popularity that Petri nets have been gaining in modeling of DEDSs is due to their powerful representational ability of concurrency and synchronization; however these properties of DEDSs cannot be expressed easily in traditional formalisms developed for analysis of `classical' systems with sequential behaviors. This book introduces the theories and applications of timed Petri nets systematically. Moreover, it also presents many practical applications in addition to theoretical developments, together with the latest research results and industrial applications of timed Petri nets. Timed Petri Nets: Theory and Application is intended for use by researchers and practitioners in the area of Discrete Event Dynamic Systems.
Download or read book Hierarchical Decision Making in Stochastic Manufacturing Systems written by Suresh P. Sethi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most important methods in dealing with the optimization of large, complex systems is that of hierarchical decomposition. The idea is to reduce the overall complex problem into manageable approximate problems or subproblems, to solve these problems, and to construct a solution of the original problem from the solutions of these simpler prob lems. Development of such approaches for large complex systems has been identified as a particularly fruitful area by the Committee on the Next Decade in Operations Research (1988) [42] as well as by the Panel on Future Directions in Control Theory (1988) [65]. Most manufacturing firms are complex systems characterized by sev eral decision subsystems, such as finance, personnel, marketing, and op erations. They may have several plants and warehouses and a wide variety of machines and equipment devoted to producing a large number of different products. Moreover, they are subject to deterministic as well as stochastic discrete events, such as purchasing new equipment, hiring and layoff of personnel, and machine setups, failures, and repairs.
Download or read book Control and Dynamic Systems V46 Manufacturing and Automation Systems Techniques and Technologies written by C.T. Leonides and published by Academic Press. This book was released on 2012-12-02 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Applications, Volume 46: Manufacturing and Automation Systems: Techniques and Technologies, Part 2 of 5 covers the significant advances and issues on the utilization of techniques and technologies in the manufacturing industries. This volume is divided into nine chapters and starts with the essential issue of software in manufacturing systems, particularly the aspects of the control software that are active in the time-critical or real time portions of the machine's operation. The succeeding chapters deal with the interactions between material-handling systems and other components of manufacturing systems; the principles of flexible manufacturing systems; the various views on the contributions of mechatronics; and the techniques for machine layout optimization in manufacturing and automation systems. These topics are followed by discussions of the application of a real-time control system to address issues of safety, productivity advances, and production cost reductions. Other chapters consider the influence of human supervisory control of predominantly automated manufacturing processes and the techniques for the manufacturing systems integration. The final chapter examines the major importance of the assembly line balancing to manufacturing systems. This book is of great value to process and mechanical engineers, as well as process control workers and researchers.
