Download or read book Time Dependency in Rock Mechanics and Rock Engineering written by Ömer Aydan and published by CRC Press. This book was released on 2017-01-06 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with time-dependency in rock mechanics and rock engineering, whose spectrum is very wide. While the term “time-dependency” involves time-dependent behavior/rate-dependent behavior of rocks in a conventional sense, this books attempts to cover the spectrum as much as possible including coupled processes of thermal, hydrological and diffusions in rocks. It presents theoretical formulations, experiments, numerical formulation and examples of applications. Of paramount concern is the long-term response and stability of rock engineering structures, including for instance man-made and natural slopes and underground facilities such as tunnels and powerhouses.

Download or read book Rock Mechanics and Rock Engineering From the Past to the Future written by Reşat Ulusay and published by CRC Press. This book was released on 2016-11-18 with total page 2044 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Mechanics and Rock Engineering: From the Past to the Future contains the contributions presented at EUROCK2016, the 2016 International Symposium of the International Society for Rock Mechanics (ISRM 2016, Ürgüp, Cappadocia Region, Turkey, 29-31 August 2016). The contributions cover almost all aspects of rock mechanics and rock engineering from theories to engineering practices, emphasizing the future direction of rock engineering technologies. The 204 accepted papers and eight keynote papers, are grouped into several main sections: - Fundamental rock mechanics - Rock properties and experimental rock mechanics - Analytical and numerical methods in rock engineering - Stability of slopes in civil and mining engineering - Design methodologies and analysis - Rock dynamics, rock mechanics and rock engineering at historical sites and monuments - Underground excavations in civil and mining engineering - Coupled processes in rock mass for underground storage and waste disposal - Rock mass characterization - Petroleum geomechanics - Carbon dioxide sequestration - Instrumentation-monitoring in rock engineering and back analysis - Risk management, and - the 2016 Rocha Medal Lecture and the 2016 Franklin Lecture Rock Mechanics and Rock Engineering: From the Past to the Future will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2016, organized by the Turkish National Society for Rock Mechanics, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.

Download or read book Industrial Communication Technology Handbook Second Edition written by Richard Zurawski and published by CRC Press. This book was released on 2014-11-07 with total page 1564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from major technology vendors, industry consortia, and government and private research establishments, the Industrial Communication Technology Handbook, Second Edition provides comprehensive and authoritative coverage of wire- and wireless-based specialized communication networks used in plant and factory automation, automotive applications, avionics, building automation, energy and power systems, train applications, and more. New to the Second Edition: 46 brand-new chapters and 21 substantially revised chapters Inclusion of the latest, most significant developments in specialized communication technologies and systems Addition of new application domains for specialized networks The Industrial Communication Technology Handbook, Second Edition supplies readers with a thorough understanding of the application-specific requirements for communication services and their supporting technologies. It is useful to a broad spectrum of professionals involved in the conception, design, development, standardization, and use of specialized communication networks as well as academic institutions engaged in engineering education and vocational training.

Download or read book Time Effects in Rock Mechanics written by N. D. Cristescu and published by John Wiley & Sons. This book was released on 1998 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world requires an increasing number of underground facilities for applications such as storage, waste repositories and traffic. Accurate prediction of the stability and deformation of these facilities is essential, and calls for model calculations using reliable and comprehensive constitutive equations describing the mechanical behaviour of the rocks involved, particularly the time-dependent effects. Here the authors combine their knowledge and personal experience in this field to encourage the practical use of material laws based on a sound physical and mathematical basis. Further discussion and research on the time-dependent behaviour of rocks and related materials is supported in the text by more than 200 figures. The text covers elasticity, creep, dilatancy, creep failure and short term failure, experimental techniques and test results, micromechanical deformation mechanisms, viscoplasticity and computation using appropriate constitutive equations, including many fundamental model calculations. Rock mechanics incorporates aspects of many disciplines including structural geology, soil mechanics, material sciences, civil, mining and petroleum engineering, seismology and geophysics. This book will therefore find a wide appreciation amongst engineers, researchers and graduate students in these and other related areas.

Download or read book Advances in Rock Dynamics and Applications written by Yingxin Zhou and published by CRC Press. This book was released on 2011-05-25 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of rock dynamics is important because many rock mechanics and rock engineering problems involve dynamic loading ranging from earthquakes to vibrations and explosions. The subject deals with the distribution and propagation of loads, dynamic responses, and processes of rocks and rate-dependent properties, coupled with the physical environm

Download or read book New Challenges in Rock Mechanics and Rock Engineering written by Roberto Tomás and published by CRC Press. This book was released on 2024-07-29 with total page 1585 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Challenges in Rock Mechanics and Rock Engineering includes the contributions presented at the ISRM European Rock Mechanics Symposium Eurock 2024 (Alicante, Spain, 15-19 July 2024), and explores cutting-edge advancements in rock mechanics and rock engineering. This comprehensive compilation covers various aspects of rock mechanics and rock engineering, including: rock properties, testing methods, infrastructure and mining rock mechanics, design analysis, stone heritage preservation, geophysics, numerical modeling, monitoring techniques, underground excavation support, risk assessment, and the application of EUROCODE-7 in rock engineering. Furthermore, it addresses areas like geomechanics for the oil and gas industry, applications of artificial intelligence, remote sensing methodologies and geothermal technology. New Challenges in Rock Mechanics and Rock Engineering covers the latest breakthroughs and tackles the new challenges in rock mechanics and rock engineering, is aimed at scientists and professionals in these fields, and serves as an essential resource for keeping up to date with industry trends and solutions.

Download or read book Engineering Rock Mechanics written by John A Hudson and published by Elsevier. This book was released on 2000-06-12 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering rock mechanics is the discipline used to design structures built in rock. These structures encompass building foundations, dams, slopes, shafts, tunnels, caverns, hydroelectric schemes, mines, radioactive waste repositories and geothermal energy projects: in short, any structure built on or in a rock mass. Despite the variety of projects that use rock engineering, the principles remain the same. Engineering Rock Mechanics clearly and systematically explains the key principles behind rock engineering. The book covers the basic rock mechanics principles; how to study the interactions between these principles and a discussion on the fundamentals of excavation and support and the application of these in the design of surface and underground structures. Engineering Rock Mechanics is recommended as an across-the-board source of information for the benefit of anyone involved in rock mechanics and rock engineering.

Download or read book Rock Mechanics and Rock Engineering written by Ömer Aydan and published by CRC Press. This book was released on 2019-12-06 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set Rock Mechanics and Rock Engineering is concerned with the application of the principles of mechanics to physical, chemical and electro-magnetic processes in the upper-most layers of the earth and the design and construction of the rock structures associated with civil engineering and exploitation or extraction of natural resources in mining and petroleum engineering. Volume 2, Applications of Rock Mechanics – Rock Engineering, discusses the applications of rock mechanics to engineering structures in/on rock, rock excavation techniques and in-situ monitoring techniques, giving some specific examples. The dynamic aspects associated with the science of earthquakes and their effect on rock structures, and the characteristics of vibrations induced by machinery, blasting and impacts as well as measuring techniques are described. Furthermore, the degradation and maintenance processes in rock engineering are explained. Rock Mechanics and Rock Engineering is intended to be a fundamental resource for younger generations and newcomers and a reference book for experts specialized in Rock Mechanics and Rock Engineering and associated with the fields of mining, civil and petroleum engineering, engineering geology, and/or specialized in Geophysics and concerned with earthquake science and engineering.

Download or read book Rock Mechanics and Rock Engineering written by Ömer Aydan and published by CRC Press. This book was released on 2022-07-30 with total page 787 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Mechanics and Rock Engineering is concerned with the application of the principles of mechanics to physical, chemical and electro-magnetic processes in the upper-most layers of the earth and the design and construction of the rock structures associated with civil engineering and exploitation or extraction of natural resources in mining and petroleum engineering. Rock mechanics requires profound knowledge of rock-constituting elements, discontinuities and their behavior under various physical and chemical actions in nature. The governing equations together with constitutive laws and experimental techniques and the solution techniques are explained and some examples of applications are given. The applications of rock mechanics to engineering structures in/on rock, rock excavation techniques and in-situ monitoring techniques are explained and some specific examples are given. The dynamic aspects associated with the science of earthquakes and their effect on rock structures, and the characteristics of vibrations induced by machinery, blasting and impacts as well as measuring techniques are described. Furthermore, the degradation and maintenance processes in rock engineering are explained. Some chapters are devoted to possible new directions in rock mechanics. This two-volume set is intended to be a fundamental resource for younger generations and newcomers and a reference work for experts specialized in Rock Mechanics and Rock Engineering and associated with the fields of mining, civil and petroleum engineering, engineering geology, and/or specialized in Geophysics and concerned with earthquake science and engineering.

Download or read book Rock Mechanics and Engineering Volume 1 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-03-16 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles is the first volume of the five-volume set Rock Mechanics and Engineering and contains twenty-four chapters from key experts in the following fields: - Discontinuities; - Anisotropy; - Rock Stress; - Geophysics; - Strength Criteria; - Modeling Rock Deformation and Failure. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.

Download or read book Rock Mechanics and Rock Engineering written by Ömer Aydan and published by CRC Press. This book was released on 2019-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set Rock Mechanics and Rock Engineering is concerned with the application of the principles of mechanics to physical, chemical and electro-magnetic processes in the upper-most layers of the earth and the design and construction of the rock structures associated with civil engineering and exploitation or extraction of natural resources in mining and petroleum engineering. Volume 1, Fundamentals of Rock Mechanics, discusses rock-constituting elements, discontinuities and their behavior under various physical and chemical actions in nature. The governing equations together with constitutive laws and experimental techniques and the solution techniques are explained and some examples of applications are given. A number of chapters are devoted to possible new directions in rock mechanics. Rock Mechanics and Rock Engineering is intended to be a fundamental resource for younger generations and newcomers and a reference book for experts specialized in Rock Mechanics and Rock Engineering and associated with the fields of mining, civil and petroleum engineering, engineering geology, and/or specialized in Geophysics and concerned with earthquake science and engineering.

Download or read book Rock Mechanics and Engineering written by C. Jaeger and published by Cambridge University Press. This book was released on 1979-06-28 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this second, enlarged edition the author continues to emphasise aspects of rock mechanics. Firm in his belief that there is no better way to study the subject than by the detailed analysis of case histories, Dr Jaeger has incorporated a number of new ones.

Download or read book Rock Mechanics and Engineering Volume 4 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-05-18 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excavation, Support and Monitoring is the fourth volume of the five-volume set Rock Mechanics and Engineering and contains twenty-three chapters from key experts in the following fields - Excavation Methods; - Support Technology; - Monitoring Technology; - Integrated Engineering Monitoring and Analysis. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wide-ranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are world-renowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.

Download or read book Prediction And Performance In Rock Mechanics and Rock Engineering written by Giovanni Barla and published by Taylor & Francis. This book was released on 2022-05-05 with total page 2100 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of conference proceedings on rock mechanics and rock engineering covering such topics as: foundations of dams, bridges and large structures; mining structures; formulation of geotechnical models; rock mass characterization; and recent advances in modelling.

Download or read book Rock Mechanics and Rock Engineering written by and published by . This book was released on 1992 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rock Mechanics and Engineering Volume 3 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-04-21 with total page 1178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis, Modeling & Design is the third volume of the five-volume set Rock Mechanics and Engineering and contains twenty-eight chapters from key experts in the following fields: - Numerical Modeling Methods; - Back Analysis; - Risk Analysis; - Design and Stability Analysis: Overviews; - Design and Stability Analysis: Coupling Process Analysis; - Design and Stability Analysis: Blast Analysis and Design; - Rock Slope Stability Analysis and Design; - Analysis and Design of Tunnels, Caverns and Stopes. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.

Download or read book Rock Mechanics and Engineering Volume 5 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-07-20 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface and Underground Projects is the last volume of the five-volume set Rock Mechanics and Engineering and contains twenty-one chapters from key experts in the following fields: - Slopes; - Tunnels and Caverns; - Mining; - Petroleum Engineering; - Thermo-/Hydro-Mechanics in Gas Storage, Loading and Radioactive Waste Disposal. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.