Download or read book Timber Connections written by Susan Hawkinson and published by . This book was released on 2003 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber Connections traces the history of five generations of Joyces, who collectively spent more than a century and a half building a lumber empire in North America. The book explores the impact of the Joyces on northern Minnesota, where they pioneered the logging industry.
Download or read book Timber Connections written by Rohana Hassan and published by Springer Nature. This book was released on 2023-04-19 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the application of mathematical and fundamental theory as stated in the relevant standards, namely EYM and NDS. Timber is one of the important building materials in the field of engineering, other than concrete and steel. However, there is still a lot of unexplored knowledge about timber, including how timber connections are made. One of the main types of timber connection is mortise and tenon. Mortise and tenon are widely seen as one of the most important traditional timber structural joint. In order to understand the load-carrying capacity and performance of the structural mortise and tenon joint, the existing theoretical background of timber joint design is made as a reference. Current equations applicable in estimating the load-carrying capacity of timber joint uses the European Yield Model (EYM). Therefore, the main aim of this book is to share the basic design knowledge, inclusive of safety factor limitations (as engineering main factor) in structural design.
Download or read book Materials and Joints in Timber Structures written by Simon Aicher and published by Springer Science & Business Media. This book was released on 2013-09-25 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended options for tailor-made bonding solutions have to be stated. Apart from melamine-urea and phenolic-resorcinol adhesives, one-component-polyurethanes, emulsion isocyanate polymers and epoxies offer a wide range of possibilities. The contributions dealing with experimental and numerical investigations on static, cyclic and seismic behavior of structures clearly reveal the enhanced potential of modern timber construction for reliable and sustainable buildings and bridges of the new millennium. The book is structured in nine thematic areas, being I) Structures II) Mechanical Connections III) Glued Joints and Adhesives IV) Timber and Concrete/Cement/Polymer Composites V) Cyclic, Seismic Behavior VI) Hardwood, Modified Wood and Bamboo VII) Cross-Laminated Timber VIII) Properties and Testing of Wood IX) Glulam
Download or read book Behaviour of Timber Connections written by Borg Madsen and published by North Vancouver, B.C. : Timber Engineering Limited. This book was released on 2000 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Guide for Improved Masonry and Timber Connections in Buildings written by S. George Fattal and published by . This book was released on 1977 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Connections in Wood Structures written by American Society of Civil Engineers. Task Committee on Fasteners and published by American Society of Civil Engineers. This book was released on 1996 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual presents current design practices and research information on mechanical fasteners used in wood connections in the United States and abroad. Chapters review a vast array of connections, including nails, spikes, and staples; lag screws and wood screws; bolts, drift bolts, and pins; metal connector plates, and timber connectors. Issues addressed range from materials and basic design criteria to fabrication practices, installation practices, connection details and the research basis for design practice.
Download or read book Timber Engineering written by Sven Thelandersson and published by John Wiley & Sons. This book was released on 2003-03-14 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber construction is one of the most prevalent methods of constructing buildings in North America and an increasingly significant method of construction in Europe and the rest of the world. Timber Engineering deals not only with the structural aspects of timber construction, structural components, joints and systems based on solid timber and engineered wood products, but also material behaviour and properties on a wood element level. Produced by internationally renowned experts in the field, this book represents the state of the art in research on the understanding of the material behaviour of solid wood and engineered wood products. There is no comparable compendium currently available on the topic - the subjects represented include the most recent phenomena of timber engineering and the newest development of practice-related research. Grouped into three different sections, 'Basic properties of wood-based structural elements', 'Design aspects on timber structures' and 'Joints and structural assemblies', this book focuses on key issues in the understanding of: timber as a modern engineered construction material with controlled and documented properties the background for design of structural systems based on timber and engineered wood products the background for structural design of joints in structural timber systems Furthermore, this invaluable book contains advanced teaching material for all technical schools and universities involved in timber engineering. It also provides an essential resource for timber engineering students and researchers, as well as practicing structural and civil engineers.
Download or read book PRO 22 International RILEM Symposium on Joints in Timber Structures written by Simon Aicher and published by RILEM Publications. This book was released on 2001 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assessment of Modification Factors for a Row of Bolts Or Timber Connectors written by Thomas Lee Wilkinson and published by . This book was released on 1980 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: When bolts or timber connectors are used in a row, with load applied parallel to the row, load will be unequally distributed among the fasteners. This study assessed methods of predicting this unequal load distribution, looked at how joint variables can affect the distribution, and compared the predictions with data existing in the literature. Presently used design procedures were also assessed. The analytical methods were found to predict proportional limit loads but not joint strength. (Author).
Download or read book Structural Timber Design written by Werner Seim and published by John Wiley & Sons. This book was released on 2024-04-05 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Timber Design Timber construction has been one of the most innovative areas of the building industry for several years. The speed with which new products are introduced into practical application is almost breathtaking compared to the other construction materials in the building industry. As a result, timber construction is continuously increasing its market share in commercial buildings and hall structures, and even in multi-storey construction for residential and office buildings. This book provides essential knowledge and skills required for the design, detailing, and construction of timber structures. Special emphasis is placed on the specific features of timber and wood-based materials compared to other construction materials. This concerns the numerous advantages, as e.g. the comparatively low weight, the good workability of the high-performance material and the large variety of assembling technologies, but also the challenges resulting from the material anisotropy and from the susceptibility to natural pests. In each chapter the essential phenomena are explained first and then brought into connection with code regulations. This aims to support the basic understanding of the interrelations and dependencies in timber engineering, which is the fundamental basis of creative engineering.
Download or read book Design of Integrally Attached Timber Plate Structures written by Yves Weinand and published by Routledge. This book was released on 2021-09-27 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Integrally-Attached Timber Plate Structures outlines a new design methodology for digitally fabricated spatial timber plate structures, presented with examples from recent construction projects. It proposes an innovative and sustainable design methodology, algorithmic geometry processing, structural optimization, and digital fabrication; technology transfer and construction are formulated and widely discussed. The methodology relies on integral mechanical attachment whereby the connection between timber plates is established solely through geometric manipulation, without additional connectors, such as nails, screws, dowels, adhesives, or welding. The transdisciplinary design framework for spatial timber plate structures brings together digital architecture, computer science, and structural engineering, covering parametric modeling and architectural computational design, geometry exploration, the digital fabrication assembly of engineered timber panels, numerical simulations, mechanical characterization, design optimization, and performance improvement. The method is demonstrated through different prototypes, physical models, and three build examples, focusing specifically on the design of the timber-plate roof structure of 23 large span arches called the Annen Headquarters in Luxembourg. This is useful for the architecture, engineering, and construction (AEC) sector and shows how new structural optimization processes can be reinvented through geometrical adaptions to control global and local geometries of complex structures. This text is ideal for structural engineering professionals and architects in both industry and academia, and construction companies.
Download or read book Concise Illustrated Guide to Timber Connections written by Peter Ross and published by . This book was released on 2012 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: llustrated guide to timber connections - brings together architectural and structural considerations - researched and written by TRADA Technology, the experts in timber construction. Ever since man conceived structures bigger than a tree, connecting together pieces of timber has challenged the ingenuity of designers. It is a lightweight fibrous material whose strength to weight ratio compares favourably with concrete and steel. Nevertheless, savvy designers who appreciate timber's many aesthetic advantages also understand the structural limitations that its organic nature impose. And that is the essence of timber connection design. This concise illustrated guide to timber connections aims to help architects and engineers answer four questions:
Download or read book Structural Timber Design written by Abdy Kermani and published by Wiley-Blackwell. This book was released on 1998-12-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Timber Design is a comprehensive textbook that provides students of building and civil engineering courses with a wealth of information and in-depth guidance on design methods to the recently revised BS 5268 : Part 2 and the proposed Eurocode 5. It is also an invaluable reference source and design aid for practising engineers and architects. The text provides a step-by-step approach to the design of all the most commonly used timber elements and connections (illustrated by detailed work examples), and encourages the use of computers to carry out design calculations. I t covers the characteristics of timber; a review of BS 5268: Part 2 and its requirements; the design of beams and columns of solid, glued laminated and composite sections and mechanical and glued timber connections. The book also reviews the proposed Eurocode 5 and its limit states requirements, including the design of flexural and axially loaded members and connections.
Download or read book Structural Timber Design to Eurocode 5 written by Jack Porteous and published by John Wiley & Sons. This book was released on 2013-04-16 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Timber Design to Eurocode 5 provides practising engineers and specialist contractors with comprehensive, detailed information and in-depth guidance on the design of timber structures based on the common rules and rules for buildings in Eurocode 5 – Part 1-1. It will also be of interest to undergraduate and postgraduate students of civil and structural engineering. It provides a step-by-step approach to the design of all of the commonly used timber elements and connections using solid timber, glued laminated timber or wood based structural products, and incorporates the requirements of the UK National Annex. It covers: strength and stiffness properties of timber and its reconstituted and engineered products key requirements of Eurocode 0, Eurocode 1 and Eurocode 5 – Part 1-1 design of beams and columns of solid timber, glued laminated, composite and thin-webbed sections lateral stability requirements of timber structures design of mechanical connections subjected to lateral and/or axial forces design of moment resisting rigid and semi-rigid connections racking design of multi-storey platform framed walls Featuring numerous detailed worked examples, the second edition has been thoroughly updated and includes information on the consequences of amendments and revisions to EC5 published since the first edition, and the significant additional requirements of BSI non contradictory, complimentary information document (PD 6693-1-1) relating to EC5. The new edition also includes a new section on axial stress conditions in composite sections, covering combined axial and bending stress conditions and reference to the major revisions to the design procedure for glued laminated timber.
Download or read book Sustainable Timber Design written by Michael Dickson and published by Routledge. This book was released on 2014-12-17 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new resource covers the material selection, structural design and connections detailing of truly sustainable timber buildings through: consideration of the nature of wood and the heritage of timber construction, including the importance of forestry and conservation a review of modern techniques to improve the durability, fire resistance and predictability of structural timber elements and their vital connections analysis of the many architectural and structural options, from roundwood shells through glulam arches and gridshells to long span hybrid structures case studies from around the world illustrating the principles discussed and the true potential of timber construction Historically there has been an imbalance between the availability of information on structural timber design and the much more widespread familiarity with traditional structural materials such as steel and concrete. This book aims to help redress the balance by presenting the essential design principles involved in the creation of elegant, user-friendly timber buildings that are practical, economic, and thoroughly sustainable. Designed to support specialist study into the benefits of 21st Century timber engineering, this book also offers architects, engineers and other construction professionals practical advice on all aspects of modern timber architecture.
Download or read book Timber Bridges written by Christopher J. Mettem and published by Routledge. This book was released on 2013-04-15 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridges built in timber are enjoying a significant revival, both for pedestrian and light traffic and increasingly for heavier loadings and longer spans. Timber's high strength-to-weight ratio, combined with the ease and speed of construction inherent in the off-site prefabrication methods used, make a timber bridge a suitable option in many different scenarios. This handbook gives technical guidance on forms, materials, structural design and construction techniques suitable for both small and large timber bridges. Eurocode 5 Part Two (BS EN 1995-2) for the first time provides an international standard for the construction of timber bridges, removing a potential obstacle for engineers where timber construction for bridges has not – in recent centuries at least – been usual. Clearly illustrated throughout, this guide explains how to make use of this oldest construction material in a modern context to create sustainable, aesthetically pleasing, practical and durable bridges. Worldwide examples include Tourand Creek Bridge, Canada; Toijala, Finland; Punt la Resgia, Switzerland; Pont de Crest, France; Almorere Pylon Bridge, the Netherlands.
Download or read book Strength of Bolted Timber Connections with Steel Side Members written by Thomas Lee Wilkinson and published by . This book was released on 1992 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
