Download or read book Radiative Heat Transfer written by Michael F. Modest and published by Academic Press. This book was released on 2003-03-07 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: The basic physics of radiative heat - how surfaces emit, reflect, and absorb waves, and how that heat is distributed.

Download or read book Thermal Radiation Heat Transfer Fourth Edition written by Robert Siegel and published by CRC Press. This book was released on 2001-12-07 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively revised 4th edition provides an up-to-date, comprehensive single source of information on the important subjects in engineering radiative heat transfer. It presents the subject in a progressive manner that is excellent for classroom use or self-study, and also provides an annotated reference to literature and research in the field. The foundations and methods for treating radiative heat transfer are developed in detail, and the methods are demonstrated and clarified by solving example problems. The examples are especially helpful for self-study. The treatment of spectral band properties of gases has been made current and the methods are described in detail and illustrated with examples. The combination of radiation with conduction and/or convection has been given more emphasis nad has been merged with results for radiation alone that serve as a limiting case; this increases practicality for energy transfer in translucent solids and fluids. A comprehensive catalog of configuration factors on the CD that is included with each book provides over 290 factors in algebraic or graphical form. Homework problems with answers are given in each chapter, and a detailed and carefully worked solution manual is available for instructors.

Download or read book Radiation Heat Transfer Modelling with Computational Fluid Dynamics written by Yehuda Sinai and published by CRC Press. This book was released on 2022-06-20 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a preliminary reference for the principles of thermal radiation and its modelling in computational fluid dynamics (CFD) simulations. Radiation Heat Transfer Modelling with Computational Fluid Dynamics covers strategies and processes for synthesizing radiation with CFD setups, computational techniques for solving the radiative transfer equation, the strengths and weaknesses thereof, boundary and initial conditions and relevant guidelines. Describing the strategic planning of a typical project, the book includes the spectroscopic properties of gases, some particulates and porous media. FEATURES Fills a gap between existing CFD and thermal radiation textbooks and elaborates on some aspects of user manuals. Aims at (1) CFD practitioners who are newcomers to thermal radiation and are looking for a preliminary introduction thereon and (2) modellers familiar with thermal radiation looking for a precursory introduction to CFD. The book is tilted somewhat towards the first group. Provides guidelines for choosing the right model, the strategic planning of the modelling and its implementation. Outlines the pitfalls of some solution techniques. Describes how radiation is included in the variety of boundary condition types offered by CFD codes. Helps to develop the practical skills required to plan, implement and interpret thermal radiation within the typical CFD code. Addresses a wide variety of physical circumstances in which thermal radiation plays a role. Offers ample references for readers searching for additional details. Includes several examples of practical applications, including fire, a utility boiler and car headlights in cold environments. This book is intended for researchers and professionals who wish to simulate problems that involve fluid flow and heat transfer with thermal radiation.

Download or read book Thermal Radiation Heat Transfer written by John R. Howell and published by CRC Press. This book was released on 2015-09-18 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the Radiative Exchange between Surfaces Further expanding on the changes made to the fifth edition, Thermal Radiation Heat Transfer, 6th Edition continues to highlight the relevance of thermal radiative transfer and focus on concepts that develop the radiative transfer equation (RTE). The book explains the fundamentals of radiative transfer, introduces the energy and radiative transfer equations, covers a variety of approaches used to gauge radiative heat exchange between different surfaces and structures, and provides solution techniques for solving the RTE. What’s New in the Sixth Edition This revised version updates information on properties of surfaces and of absorbing/emitting/scattering materials, radiative transfer among surfaces, and radiative transfer in participating media. It also enhances the chapter on near-field effects, addresses new applications that include enhanced solar cell performance and self-regulating surfaces for thermal control, and updates references. Comprised of 17 chapters, this text: Discusses the fundamental RTE and its simplified forms for different medium properties Presents an intuitive relationship between the RTE formulations and the configuration factor analyses Explores the historical development and the radiative behavior of a blackbody Defines the radiative properties of solid opaque surfaces Provides a detailed analysis and solution procedure for radiation exchange analysis Contains methods for determining the radiative flux divergence (the radiative source term in the energy equation) Thermal Radiation Heat Transfer, 6th Edition explores methods for solving the RTE to determine the local spectral intensity, radiative flux, and flux gradient. This book enables you to assess and calculate the exchange of energy between objects that determine radiative transfer at different energy levels.

Download or read book Radiative Heat Transfer in Turbulent Combustion Systems written by Michael F. Modest and published by Springer. This book was released on 2016-01-06 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction reviews why combustion and radiation are important, as well as the technical challenges posed by radiation. Emphasis is on interactions among turbulence, chemistry and radiation (turbulence-chemistry-radiation interactions – TCRI) in Reynolds-averaged and large-eddy simulations. Subsequent chapters cover: chemically reacting turbulent flows; radiation properties, Reynolds transport equation (RTE) solution methods, and TCRI; radiation effects in laminar flames; TCRI in turbulent flames; and high-pressure combustion systems. This Brief presents integrated approach that includes radiation at the outset, rather than as an afterthought. It stands as the most recent developments in physical modeling, numerical algorithms, and applications collected in one monograph.

Download or read book Heat Pipe Design and Technology written by Bahman Zohuri and published by Springer. This book was released on 2016-04-28 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a practical study of modern heat pipe engineering, discussing how it can be optimized for use on a wider scale. An introduction to operational and design principles, this book offers a review of heat and mass transfer theory relevant to performance, leading into and exploration of the use of heat pipes, particularly in high-heat flux applications and in situations in which there is any combination of non-uniform heat loading, limited airflow over the heat generating components, and space or weight constraints. Key implementation challenges are tackled, including load-balancing, materials characteristics, operating temperature ranges, thermal resistance, and operating orientation. With its presentation of mathematical models to calculate heat transfer limitations and temperature gradient of both high- and low-temperature heat pipes, the book compares calculated results with the available experimental data. It also includes a series of computer programs developed by the author to support presented data, aid design, and predict performance.

Download or read book Developments in Radiative Heat Transfer written by S. T. Thynell and published by . This book was released on 1992 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mathematical Modeling of Food Processing written by Mohammed M. Farid and published by CRC Press. This book was released on 2010-05-21 with total page 1482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by international experts from industry, research centers, and academia, Mathematical Modeling of Food Processing discusses the physical and mathematical analysis of transport phenomena associated with food processing. The models presented describe many of the important physical and biological transformations that occur in food during proces

Download or read book Thermal Radiation Heat Transfer 5th Edition written by John R. Howell and published by CRC Press. This book was released on 2010-09-28 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive overview of the radiative behavior and properties of materials, the fifth edition of this classic textbook describes the physics of radiative heat transfer, development of relevant analysis methods, and associated mathematical and numerical techniques. Retaining the salient features and fundamental coverage that have made it popular, Thermal Radiation Heat Transfer, Fifth Edition has been carefully streamlined to omit superfluous material, yet enhanced to update information with extensive references. Includes four new chapters on Inverse Methods, Electromagnetic Theory, Scattering and Absorption by Particles, and Near-Field Radiative Transfer Keeping pace with significant developments, this book begins by addressing the radiative properties of blackbody and opaque materials, and how they are predicted using electromagnetic theory and obtained through measurements. It discusses radiative exchange in enclosures without any radiating medium between the surfaces—and where heat conduction is included within the boundaries. The book also covers the radiative properties of gases and addresses energy exchange when gases and other materials interact with radiative energy, as occurs in furnaces. To make this challenging subject matter easily understandable for students, the authors have revised and reorganized this textbook to produce a streamlined, practical learning tool that: Applies the common nomenclature adopted by the major heat transfer journals Consolidates past material, reincorporating much of the previous text into appendices Provides an updated, expanded, and alphabetized collection of references, assembling them in one appendix Offers a helpful list of symbols With worked-out examples, chapter-end homework problems, and other useful learning features, such as concluding remarks and historical notes, this new edition continues its tradition of serving both as a comprehensive textbook for those studying and applying radiative transfer, and as a repository of vital literary references for the serious researcher.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Efficiency in Process Technology written by P.A. Pilavachi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1975 the Commission has been stimulating R & D work aimed at energy saving. The conference objective was to provide an international forum for the presentation and discussion of recent R & D relevant to energy efficiency, taking into account environmental aspects, in the energy intensive process industries.

Download or read book Computational Fluid Dynamics in Industrial Combustion written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2000-10-26 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although many books have been written on computational fluid dynamics (CFD) and many written on combustion, most contain very limited coverage of the combination of CFD and industrial combustion. Furthermore, most of these books are written at an advanced academic level, emphasize theory over practice, and provide little help to engineers who need

Download or read book Handbook of Fluid Dynamics written by Richard W. Johnson and published by CRC Press. This book was released on 1998-05-28 with total page 1962 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides professionals in the field of fluid dynamics with a comprehensive guide and resource. The book balances three traditional areas of fluid mechanics - theoretical, computational, and experimental - and expounds on basic science and engineering techniques. Each chapter introduces a topic, discusses the primary issues related to this subject, outlines approaches taken by experts, and supplies references for further information. Topics discussed include: basic engineering fluid dynamics classical fluid dynamics turbulence modeling reacting flows multiphase flows flow and porous media high Reynolds number asymptotic theories finite difference method finite volume method finite element method spectral element methods for incompressible flows experimental methods, such as hot-wire anemometry, laser-Doppler velocimetry, and flow visualization applications, such as axial-flow compressor and fan aerodynamics, turbomachinery, airfoils and wings, atmospheric flows, and mesoscale oceanic flows The text enables experts in particular areas to become familiar with useful information from outside their specialization, providing a broad reference for the significant areas within fluid dynamics.

Download or read book Proceedings of the 5th International Conference on Industrial Engineering ICIE 2019 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2019-11-30 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 1995-11-22 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic principles and applications of radiative heat transfer used in energy, space, and geo-environmental engineering, and can serve as a reference book for engineers and scientists in researchand development. A PC disk containing software for numerical analyses by the Monte Carlo method is included to provide hands-on practice in analyzing actual radiative heat transfer problems.Advances in Heat Transfer is designed to fill the information gap between regularly scheduled journals and university level textbooks by providing in-depth review articles over a broader scope than journals or texts usually allow. - Offers solution methods for integro-differential formulation to help avoid difficulties - Includes a computer disk for numerical analyses by PC - Discusses energy absorption by gas and scattering effects by particles - Treats non-gray radiative gases - Provides example problems for direct applications in energy, space, and geo-environmental engineering

Download or read book 3D Radiative Transfer in Cloudy Atmospheres written by Alexander Marshak and published by Springer Science & Business Media. This book was released on 2005-07-22 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in three-dimensional cloud radiation over the past few decades are assessed and distilled into this contributed volume. Chapters are authored by subject-matter experts who address a broad audience of graduate students, researchers, and anyone interested in cloud-radiation processes in the solar and infrared spectral regions. After two introductory chapters and a section on the fundamental physics and computational techniques, the volume extensively treats two main application areas: the impact of clouds on the Earth's radiation budget, which is an essential aspect of climate modeling; and remote observation of clouds, especially with the advanced sensors on current and future satellite missions.

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 32 (thesis year 1987) a total of 12,483 theses titles from 22 Canadian and 176 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 32 reports theses submitted in 1987, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.