Download or read book Three Dimensional Non Linear Finite Element Analysis of Laterally Loaded Single Pile in Soft Clay written by Oday A. Rasheed and published by . This book was released on 2009 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Three dimensional Non linear Finite Element Analysis of Laterally Loaded Piles in Clay written by Sujit Kumar Bhowmik and published by . This book was released on 1991 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Behavior of laterally loaded single piles and pile groups in fine grained soils are investigated using a non-linear finite element methodology. The purpose is to gather behavioral information that would help improve our knowledge of pile behavior and enhance the applicability of some existing methods of analysis. A three-dimensional non-linear finite element program, PILE3D, has been developed. An anisotropically hardening bounding surface plasticity model is used to model soil behavior. Behavior of soil-pile interface is modeled using thin isoparametric elements. Various geotechnical loading and boundary conditions including drained and undrained loading, water table, in-situ stresses, preconsolidation and formation of gap at the soil-pile interface, have been implemented. Two full-scale laterally loaded pile tests are analyzed using two- and three-dimensional idealizations and results are compared with observed pile behavior. Good agreement is obtained between measured and computed bending moment, soil resistance and lateral deflection along the length of the pile, load-deflection response at the pile-head and p-y curves at different depths. Influence on the behavior of the pile-soil system of flexural rigidity and diameter of the pile, shear strength, lateral pressure coefficient, friction angle and preconsolidation of the soil, and gap formation behind the pile at the soil-pile interface are investigated. Results are compared with some existing criteria for the determination of p-y curves. Effect of interaction between the individual piles in a group is studied using three different configurations: (i) an $infty$ x 1 group, (ii) a 1 x $infty$ group and (iii) an $infty$ x $infty$ group. Influence of spacing between the piles in a group is investigated. Results are compared with some existing theoretical solutions and with results of full-scale and model-scale pile load tests. Interactions factors are developed to adjust single pile p-y curves to account for group interaction.
Download or read book Analysis of Laterally Loaded Piles in Multilayered Soil Deposits written by Dipanjan Basu and published by Purdue University Press. This book was released on 2007-10-01 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report focuses on the development of a new method of analysis of laterally loaded piles embedded in a multi-layered soil deposit treated as a three-dimensional continuum. Assuming that soil behaves as a linear elastic material, the governing differential equations for the deflection of laterally loaded piles were obtained using energy principles and calculus of variations. The differential equations were solved using both the method of initial parameters and numerical techniques. Soil resistance, pile deflection, slope of the deflected pile, bending moment and shear force can be easily obtained at any depth along the entire pile length. The results of the analysis were in very good agreement with three-dimensional finite element analysis results. The analysis was further extended to account for soil nonlinearity. A few simple constitutive relationships that allow for modulus degradation with increasing strain were incorporated into the analysis. The interaction of piles in groups was also studied.
Download or read book Soft Clay Engineering written by E.W. Brand and published by Elsevier. This book was released on 1981-01-01 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: Richly illustrated and supplemented by numerous graphs and tables, the book is based on eleven revised and edited state-of-the-art reports originally delivered at an International Symposium on Soft Clay held in Bangkok.
Download or read book Three dimensional Finite Element Analysis of a Laterally Loaded Model Pile in Sand written by George Cameron Appel and published by . This book was released on 1975 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering written by The Organizing Committee of the 16th ICSMGE and published by IOS Press. This book was released on 2005-09-12 with total page 3742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th ICSMGE responds to the needs of the engineering and construction community, promoting dialog and exchange between academia and practice in various aspects of soil mechanics and geotechnical engineering. This is reflected in the central theme of the conference 'Geotechnology in Harmony with the Global Environment'. The proceedings of the conference are of great interest for geo-engineers and researchers in soil mechanics and geotechnical engineering. Volume 1 contains 5 plenary session lectures, the Terzaghi Oration, Heritage Lecture, and 3 papers presented in the major project session. Volumes 2, 3, and 4 contain papers with the following topics: Soil mechanics in general; Infrastructure and mobility; Environmental issues of geotechnical engineering; Enhancing natural disaster reduction systems; Professional practice and education. Volume 5 contains the report of practitioner/academic forum, 20 general reports, a summary of the sessions and workshops held during the conference.
Download or read book Three dimensional Finite Element Model for Laterally Loaded Piles written by Manish Kumar and published by . This book was released on 1990 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of Indian Geotechnical and Geoenvironmental Engineering Conference IGGEC 2021 Vol 1 written by Arvind Kumar Agnihotri and published by Springer Nature. This book was released on 2022-11-24 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the Indian Geotechnical and Geoenvironmental Engineering Conference (IGGEC-21). Various topics covered in this book include geotechnical engineering, earthquake geotechnical engineering, geoenvironmental engineering, ground improvement, transportation geotechnics, waste management and sustainable engineering. The book will be a valuable reference for researchers and professionals in the discipline of civil, materials, geoenvironmental engineering, landfills, hydrogeology, ground improvement and earthquake geotechnical engineering.
Download or read book NUMGE 2002 written by Philippe Mestat and published by Presses des Ponts. This book was released on 2002 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Dynamics and Soil Structure Interaction for Resilient Infrastructure written by Tarek Abdoun and published by Springer. This book was released on 2017-07-11 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrastructure is the key to creating a sustainable community. It affects our future well-being as well as the economic climate. Indeed, the infrastructure we are building today will shape tomorrow's communities. GeoMEast 2017 created a venue for researchers and practitioners from all over the world to share their expertise to advance the role of innovative geotechnology in developing sustainable infrastructure. This volume focuses on the role of soil-structure-interaction and soil dynamics. It discusses case studies as well as physical and numerical models of geo-structures. It covers: Soil-Structure-Interaction under static and dynamic loads, dynamic behavior of soils, and soil liquefaction. It is hoped that this volume will contribute to further advance the state-of-the-art for the next generation infrastructure. This volume is part of the proceedings of the 1st GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2017.
Download or read book Three dimensional Finite Element Analysis of Laterally Loaded Structures written by G. Cameron Appel and published by . This book was released on 1975 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory and Practice of Pile Foundations written by Wei Dong Guo and published by CRC Press. This book was released on 2012-11-14 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile Foundations are an essential basis for many structures. It is vital that they be designed with the utmost reliability, because the cost of failure is potentially huge. Covering a whole range of design issues relating to pile design, this book presents economical and efficient design solutions and demonstrates them using real world examples. Co
Download or read book Three dimensional Nonlinear Finite Element Analysis of Pile Groups written by Yacoub Mohammad Najjar and published by . This book was released on 1986 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Methods in Geotechnical Engineering IX Volume 2 written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-27 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering. This is volume 2 of the NUMGE 2018 set.
Download or read book Essentials of Offshore Structures written by D.V. Reddy and published by CRC Press. This book was released on 2016-04-19 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essentials of Offshore Structures: Framed and Gravity Platforms examines the engineering ideas and offshore drilling platforms for exploration and production. This book offers a clear and acceptable demonstration of both the theory and application of the relevant procedures of structural, fluid, and geotechnical mechanics to offshore structures. It
Download or read book Analysis of Pile Foundations Subject to Static and Dynamic Loading written by Amir M. Kaynia and published by CRC Press. This book was released on 2021-08-30 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents computational tools and design principles for piles used in a wide range of applications and for different loading conditions. The chapters provide a mixture of basic engineering solutions and latest research findings in a balanced manner. The chapters are written by world-renowned experts in the field. The materials are presented in a unified manner based on both simplified and rigorous numerical methods. The first four chapters present the basic elements and steps in analysis of piles under static and cyclic loading together with clear references to the appropriate design regulations in Eurocode 7 when relevant. The analysis techniques cover conventional code-based methods, solutions based on pile-soil interaction springs, and advanced 3D finite element methods. The applications range from conventional piles to large circular steel piles used as anchors or monopiles in offshore applications. Chapters 5 to 10 are devoted to dynamic and earthquake analyses and design. These chapters cover a range of solutions from dynamic pile-soil springs to elasto-dynamic solutions of large pile groups. Both linear and nonlinear soil behaviours are considered along with response due to dynamic loads and earthquake shaking including possible liquefaction. The book is unique in its unified treatment of the solutions used for static and dynamic analysis of piles with practical examples of application. The book is considered a valuable tool for practicing engineers, graduate students and researchers.
Download or read book Numerical Methods in Geotechnical Engineering IX written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-19 with total page 1656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering.
