Download or read book Computation of Three Dimensional Complex Flows written by Michel Deville and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Der Sammelband enthält Beiträge einer Tagung über die Simulation von dreidimensionalen Flüssigkeiten. Sie geben einen Überblick über den Stand des Wissens auf dem Gebiet der numerischen Simulation der Turbulenz, angewandt auf eine weite Spanne von Problemen wie Aerodynamik, Nicht-Newtonsche Flüssigkeiten, Konvektion.This volume contains the material presented at the IMACS-COST Conference on CFD, Three-Dimensional Complex Flows, held in Lausanne (Switzerland), September 13 - 15, 1995. It gives an overview of the current state of numerical simulation and turbulence modelling applied to a wide range of fluid flow problems such as an example aerodynamics, non-Newtonian flows, transition, thermal convection.

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, SIld disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna and broader dissemination. tional publishing house to assure improved service Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 30 (thesis year 1985) a total of 12,400 theses titles from 26 Canadian and 186 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work.

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Natural Convection in a Square Cavity written by Graham De Vahl Davis and published by . This book was released on 1982 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the ASME JSME Thermal Engineering Joint Conference Fundamentals of radiation heat transfer written by and published by . This book was released on 1991 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Collection of Technical Papers written by and published by . This book was released on 1986 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Transfer 1994 written by G. F. Hewitt and published by CRC Press. This book was released on 1994 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transactions on Engineering Technologies written by Gi-Chul Yang and published by Springer. This book was released on 2015-05-07 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains fifty-one revised and extended research articles written by prominent researchers participating in the international conference on Advances in Engineering Technologies and Physical Science (London, UK, 2-4 July, 2014), under the World Congress on Engineering 2014 (WCE 2014). Topics covered include mechanical engineering, bioengineering, internet engineering, wireless networks, image engineering, manufacturing engineering and industrial applications. The book offers an overview of the tremendous advances made recently in engineering technologies and the physical sciences and their applications and also serves as an excellent reference for researchers and graduate students working in these fields.

Download or read book Magnetic Convection written by Hiroyuki Ozoe and published by Imperial College Press. This book was released on 2005 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacture of silicon single crystals is one of the most important processes in the information technology industry. This book explains the details of liquid metal convection, providing a guide for the elegant operation and control of Czochralski crystal growth, including the effect of magnetic control. Also covered is the newly emerging research field of the application of strong magnetic field using a superconducting magnet. Model equations for the phenomena in the magnetic field are treated in detail, which will be of much use to researchers and engineers in the field.The coverage includes the effect of the Lorentz force in materials processing and the magnetic force of recently developed superconducting magnets. It examines heat, mass and momentum transfer in electro-conducting and non-conducting fluids under normal and very strong magnetic fields. The book also treats the Czochralski single crystal growth process and continuous steel casting process as the most important current applications of magnetic fields. Numerical approaches are compared with the corresponding experimental measurements.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transport Phenomena in Food Processing First International Conference Proceedings written by Selcuk Guceri and published by CRC Press. This book was released on 1992-11-30 with total page 1618 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Heat Transfer written by Tien Mo Shih and published by CRC Press. This book was released on 1984-06-01 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Natural Convection in Enclosures written by Kenneth E. Torrance and published by . This book was released on 1980 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Computational Fluid Dynamics written by Vijay K. Garg and published by CRC Press. This book was released on 1998-05-08 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Describes the latest techniques and real-life applications of computational fluid dynamics (CFD) and heat transfer in aeronautics, materials processing and manufacturing, electronic cooling, and environmental control. Includes new material from experienced researchers in the field. Complete with detailed equations for fluid flow and heat transfer.

Download or read book Radiative Heat Transfer written by Michael F. Modest and published by Academic Press. This book was released on 2013-02-20 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Radiative Heat Transfer describes the basic physics of radiation heat transfer. The book provides models, methodologies, and calculations essential in solving research problems in a variety of industries, including solar and nuclear energy, nanotechnology, biomedical, and environmental. Every chapter of Radiative Heat Transfer offers uncluttered nomenclature, numerous worked examples, and a large number of problems—many based on real world situations—making it ideal for classroom use as well as for self-study. The book's 24 chapters cover the four major areas in the field: surface properties; surface transport; properties of participating media; and transfer through participating media. Within each chapter, all analytical methods are developed in substantial detail, and a number of examples show how the developed relations may be applied to practical problems. - Extensive solution manual for adopting instructors - Most complete text in the field of radiative heat transfer - Many worked examples and end-of-chapter problems - Large number of computer codes (in Fortran and C++), ranging from basic problem solving aids to sophisticated research tools - Covers experimental methods

Download or read book Engineering Turbulence Modelling and Experiments 3 written by G. Bergeles and published by Newnes. This book was released on 2012-12-02 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and discussses new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. At present, turbulence is one of the key issues in tackling engineering flow problems. Powerful computers and numerical methods are now available for solving the flow equations, but the simulation of turbulence effects which are nearly always important in practice, is still in an unsatisfactory state and introduces considerable uncertainities in the accuracy of CFD calculations. These and other aspects of turbulence modelling and measurements are dealt with in detail by experts in the field. The resulting book is an up-to-date review of the most recent research in this exciting area.

Download or read book Proceedings written by and published by . This book was released on 1991 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: