Download or read book Parallel Processing 1980 to 2020 written by Robert Kuhn and published by Springer Nature. This book was released on 2022-05-31 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This historical survey of parallel processing from 1980 to 2020 is a follow-up to the authors’ 1981 Tutorial on Parallel Processing, which covered the state of the art in hardware, programming languages, and applications. Here, we cover the evolution of the field since 1980 in: parallel computers, ranging from the Cyber 205 to clusters now approaching an exaflop, to multicore microprocessors, and Graphic Processing Units (GPUs) in commodity personal devices; parallel programming notations such as OpenMP, MPI message passing, and CUDA streaming notation; and seven parallel applications, such as finite element analysis and computer vision. Some things that looked like they would be major trends in 1981, such as big Single Instruction Multiple Data arrays disappeared for some time but have been revived recently in deep neural network processors. There are now major trends that did not exist in 1980, such as GPUs, distributed memory machines, and parallel processing in nearly every commodity device. This book is intended for those that already have some knowledge of parallel processing today and want to learn about the history of the three areas. In parallel hardware, every major parallel architecture type from 1980 has scaled-up in performance and scaled-out into commodity microprocessors and GPUs, so that every personal and embedded device is a parallel processor. There has been a confluence of parallel architecture types into hybrid parallel systems. Much of the impetus for change has been Moore’s Law, but as clock speed increases have stopped and feature size decreases have slowed down, there has been increased demand on parallel processing to continue performance gains. In programming notations and compilers, we observe that the roots of today’s programming notations existed before 1980. And that, through a great deal of research, the most widely used programming notations today, although the result of much broadening of these roots, remain close to target system architectures allowing the programmer to almost explicitly use the target’s parallelism to the best of their ability. The parallel versions of applications directly or indirectly impact nearly everyone, computer expert or not, and parallelism has brought about major breakthroughs in numerous application areas. Seven parallel applications are studied in this book.

Download or read book Using Computers Effectively written by Debojit Acharjee and published by Rowman & Littlefield. This book was released on 2023-06-14 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: After reading this book, a reader can get the fundamental knowledge about computer hardware and software. This book is also a guide to buying, building and using a desktop computer for education.

Download or read book I Bytes Technology Industry written by V.G and published by EGBG Services LLC. This book was released on 2019-12-11 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document brings together a set of latest data points and publicly available information relevant for Technology. We are very excited to share this content and believe that readers will benefit immensely from this periodic publication immensely.

Download or read book How I Build My PC From Scratch written by Dr RJ Nair and published by Dr RJ Nair. This book was released on 2020-03-24 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: I always believe Gaming, Video editing, and PC building should go hand in hand. Most of the choices of Prebuilt PCs available in the market are all very expensive. I did include all the basic knowledge required to build yourself a nice basic to intermediate level gaming as well as video editing PC. And the configuration and the requirements to build the best gaming & video editing PC based on your budget, profession or requirement. This book also includes top components available in the market for this year, 2020. PC building in easy to understand simplified steps. This book is the gateway to the world of building your own PC for Gaming and video editing. At the end of the day building PC is like creating life itself, breathing, moving machines, that talk and communicate with you in many ways, makes our life easier. The satisfaction you get from this is beyond words. So don’t deny yourself from this amazing experience and start building one right now. You will also notice that this has opened up a world of possibilities. How I Build My PC From Scratch EVERYTHING BASIC YOU NEED TO KNOW ON BUILDING YOUR OWN AMD PC FOR VIDEO EDITING & GAMING

Download or read book I Bytes Technology Industry written by IT-Shades and published by EGBG Services LLC. This book was released on 2020-08-24 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document brings together a set of latest data points and publicly available information relevant for Technology Industry. We are very excited to share this content and believe that readers will benefit from this periodic publication immensely.

Download or read book Thread Ripper written by Amalie Smith and published by . This book was released on 2022-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book AI APPLICATIONS written by Dr. Ram Prasad Reddy Sadi and published by GCS PUBLISHERS. This book was released on 2022-05-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: AI APPLICATIONS WRITTEN BY Dr. Ram Prasad Reddy Sadi,Dr.Yeligeti Raju, Mr.G.Saravanan,Dr. G Rajesh Chandra

Download or read book CompTIA A Core 1 220 1101 and Core 2 220 1102 Pearson uCertify Course and Labs Access Code Card written by Rick McDonald and published by Pearson IT Certification. This book was released on 2022-09-20 with total page 1294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trust the best-selling Cert Guide series from Pearson IT Certification to help you learn, prepare, and practice for exam success. They are built with the objective of providing assessment, review, and practice to help ensure you are fully prepared for your certification exam. CompTIA A+ Core 1 (220-1101) and Core 2 (220-1102) Cert Guide presents you with an organized test preparation routine using proven series elements and techniques. “Do I Know This Already?” quizzes open each chapter and enable you to decide how much time you need to spend on each section. Exam topic lists make referencing easy. Chapter-ending exam preparation tasks help you drill on key concepts you must know thoroughly. Understand and apply CompTIA A+ Core 1 (220-1101) and Core 2 (220-1102) exam topics Assess your knowledge with chapter-opening quizzes Review key concepts with exam preparation tasks Practice with realistic exam questions in the practice test software CompTIA A+ Core 1 (220-1101) and Core 2 (220-1102) Cert Guide focuses specifically on the objectives for the CompTIA A+ Core 1 (220-1101) and Core 2 (220-1102) exams. Leading instructor Rick McDonald shares preparation hints and test-taking tips, helping you identify areas of weakness and improve both your conceptual knowledge and hands-on skills. Material is presented in a concise manner, focusing on increasing your understanding and retention of exam topics. This complete study package includes A test-preparation routine proven to help you pass the exams Do I Know This Already? quizzes, which enable you to decide how much time you need to spend on each section Chapter-ending exercises, which help you drill on key concepts you must know thoroughly An online interactive Flash Cards application to help you drill on key terms by chapter The powerful Pearson Test Prep Practice Test software, with four full exams comprised of well-reviewed, exam-realistic questions, customization options, and detailed performance reports A final preparation chapter, which guides you through tools and resources to help you craft your review and test-taking strategies Study plan suggestions and templates to help you organize and optimize your study time Well regarded for its level of detail, study plans, assessment features, and challenging review questions and exercises, this study guide helps you understand the concepts and apply the techniques you need to ensure your exam success. This study guide helps you learn all the topics on the CompTIA A+ Core 1 (220-1101) and Core 2 (220-1102) exams, deepening your knowledge of Configuring laptops and mobile devices Configuring wired and wireless networks Installing hardware: RAM, storage drives, power supplies, motherboards, CPUs, and printers Understanding common cloud models and virtualization Troubleshooting hardware and network issues Performing operating system installations and upgrades Managing and configuring security settings Troubleshooting Windows, PC security issues, and common mobile OS and application issues Implementing workstation backup and recovery methods Companion Website: The companion website contains four full practice exams, an interactive Flash Cards application, Study Planner, Glossary, review exercises, and more. Includes Exclusive Offers for Up to 80% Off Video Training, Practice Tests, and more

Download or read book T Bytes Hybrid Cloud Infrastructure written by IT-Shades and published by EGBG Services LLC. This book was released on 2020-08-10 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document brings together a set of latest data points and publicly available information relevant for Hybrid Cloud Infrastructure Industry. We are very excited to share this content and believe that readers will benefit from this periodic publication immensely.

Download or read book High Performance Computing written by Amanda Bienz and published by Springer Nature. This book was released on 2023-09-25 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the papers of several workshops which were held in conjunction with the 38th International Conference on High Performance Computing, ISC High Performance 2023, held in Hamburg, Germany, during May 21–25, 2023. The 49 revised full papers presented in this book were carefully reviewed and selected from 70 submissions. ISC High Performance 2023 presents the following workshops: ​2nd International Workshop on Malleability Techniques Applications in High-Performance Computing (HPCMALL) 18th Workshop on Virtualization in High-Performance Cloud Computing (VHPC 23) HPC I/O in the Data Center (HPC IODC) Workshop on Converged Computing of Cloud, HPC, and Edge (WOCC’23) 7th International Workshop on In Situ Visualization (WOIV’23) Workshop on Monitoring and Operational Data Analytics (MODA23) 2nd Workshop on Communication, I/O, and Storage at Scale on Next-Generation Platforms: Scalable Infrastructures First International Workshop on RISC-V for HPC Second Combined Workshop on Interactive and Urgent Supercomputing (CWIUS) HPC on Heterogeneous Hardware (H3)

Download or read book Intelligent Methods in Computing Communications and Control written by Ioan Dzitac and published by Springer Nature. This book was released on 2020-07-27 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Computers Communications and Control 2020 (ICCCC2020), covering topics such as theory for computing and communications, integrated solutions in computer-based control, computational intelligence and soft computing, decision-making and support systems. The ICCCC was founded in Romania in 2006, and its eight editions have featured respected keynote speakers and leading computer scientists from around the globe.

Download or read book Boost Your Business WITH AI written by Marco Saque and published by Marco Saque. This book was released on 2024-07-10 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlock the Power of AI to Transform Your Business! In today's fast-paced world, staying ahead of the competition means embracing Artificial Intelligence (AI). "Boost Your Business Efficiency with AI" is the ultimate guide for integrating AI into your business strategy. Whether you're a small business owner, a manager at a mid-sized company, or a leader in a large corporation, this book offers comprehensive AI insights, practical applications, and expert guidance. Why This Book? Comprehensive AI Insights: From basics to advanced strategies. Practical Applications: Save time, reduce costs, and boost productivity. Expert Guidance: Real-life case studies by AI expert Marco Saque. Ready-to-Use Templates: Implement AI strategies effectively. Future Trends: Stay ahead with the latest AI technologies. What You’ll Learn: AI Essentials: Fundamentals and business applications. Current AI Landscape: Latest trends and industry transformations. AI Strategy: Identifying opportunities and implementing tools. Ethical AI: Navigating the complexities of AI ethics. Sustainability with AI: Contributing to environmental and governance goals. Design Thinking & AI: Enhancing project success and customer experience

Download or read book Physically Based Rendering written by Matt Pharr and published by Morgan Kaufmann. This book was released on 2010-06-28 with total page 1201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition describes both the mathematical theory behind a modern photorealistic rendering system as well as its practical implementation. Through the ideas and software in this book, designers will learn to design and employ a full-featured rendering system for creating stunning imagery. Includes a companion site complete with source code for the rendering system described in the book, with support for Windows, OS X, and Linux.

Download or read book Model Based Performance Prediction for Concurrent Software on Multicore Architectures A Simulation Based Approach written by Frank, Markus Kilian and published by KIT Scientific Publishing. This book was released on 2022-07-18 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die modellbasierte Performancevorhersage ist ein bekanntes Konzept zur Gewährleistung der Softwarequalität. Derzeitige Ansätze basieren auf einem Modell mit einer Metrik, was zu ungenauen Vorhersagen für moderne Architekturen führt. In dieser Arbeit wird ein Multi-Strategie-Ansatz zur Erweiterung von Performancevorhersagemodellen zur Unterstützung von Multicore-Architekturen vorgestellt, in Palladio implementiert und dadurch die Genauigkeit der Vorhersage deutlich verbessert. - Model-based performance prediction is a well-known concept to ensure the quality of software. Current approaches are based on a single-metric model, which leads to inaccurate predictions for modern architectures. This thesis presents a multi-strategies approach to extend performance prediction models to support multicore architectures. We implemented the strategies into Palladio and significantly increased the performance prediction power.

Download or read book Computational Science ICCS 2020 written by Valeria V. Krzhizhanovskaya and published by Springer Nature. This book was released on 2020-06-18 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seven-volume set LNCS 12137, 12138, 12139, 12140, 12141, 12142, and 12143 constitutes the proceedings of the 20th International Conference on Computational Science, ICCS 2020, held in Amsterdam, The Netherlands, in June 2020.* The total of 101 papers and 248 workshop papers presented in this book set were carefully reviewed and selected from 719 submissions (230 submissions to the main track and 489 submissions to the workshops). The papers were organized in topical sections named: Part I: ICCS Main Track Part II: ICCS Main Track Part III: Advances in High-Performance Computational Earth Sciences: Applications and Frameworks; Agent-Based Simulations, Adaptive Algorithms and Solvers; Applications of Computational Methods in Artificial Intelligence and Machine Learning; Biomedical and Bioinformatics Challenges for Computer Science Part IV: Classifier Learning from Difficult Data; Complex Social Systems through the Lens of Computational Science; Computational Health; Computational Methods for Emerging Problems in (Dis-)Information Analysis Part V: Computational Optimization, Modelling and Simulation; Computational Science in IoT and Smart Systems; Computer Graphics, Image Processing and Artificial Intelligence Part VI: Data Driven Computational Sciences; Machine Learning and Data Assimilation for Dynamical Systems; Meshfree Methods in Computational Sciences; Multiscale Modelling and Simulation; Quantum Computing Workshop Part VII: Simulations of Flow and Transport: Modeling, Algorithms and Computation; Smart Systems: Bringing Together Computer Vision, Sensor Networks and Machine Learning; Software Engineering for Computational Science; Solving Problems with Uncertainties; Teaching Computational Science; UNcErtainty QUantIficatiOn for ComputationAl modeLs *The conference was canceled due to the COVID-19 pandemic.

Download or read book Programming Persistent Memory written by Steve Scargall and published by Apress. This book was released on 2020-01-09 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning and experienced programmers will use this comprehensive guide to persistent memory programming. You will understand how persistent memory brings together several new software/hardware requirements, and offers great promise for better performance and faster application startup times—a huge leap forward in byte-addressable capacity compared with current DRAM offerings. This revolutionary new technology gives applications significant performance and capacity improvements over existing technologies. It requires a new way of thinking and developing, which makes this highly disruptive to the IT/computing industry. The full spectrum of industry sectors that will benefit from this technology include, but are not limited to, in-memory and traditional databases, AI, analytics, HPC, virtualization, and big data. Programming Persistent Memory describes the technology and why it is exciting the industry. It covers the operating system and hardware requirements as well as how to create development environments using emulated or real persistent memory hardware. The book explains fundamental concepts; provides an introduction to persistent memory programming APIs for C, C++, JavaScript, and other languages; discusses RMDA with persistent memory; reviews security features; and presents many examples. Source code and examples that you can run on your own systems are included. What You’ll Learn Understand what persistent memory is, what it does, and the value it brings to the industry Become familiar with the operating system and hardware requirements to use persistent memory Know the fundamentals of persistent memory programming: why it is different from current programming methods, and what developers need to keep in mind when programming for persistence Look at persistent memory application development by example using the Persistent Memory Development Kit (PMDK)Design and optimize data structures for persistent memoryStudy how real-world applications are modified to leverage persistent memoryUtilize the tools available for persistent memory programming, application performance profiling, and debugging Who This Book Is For C, C++, Java, and Python developers, but will also be useful to software, cloud, and hardware architects across a broad spectrum of sectors, including cloud service providers, independent software vendors, high performance compute, artificial intelligence, data analytics, big data, etc.

Download or read book SQL Server Hardware written by Glenn Berry and published by . This book was released on 2011-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: SQL Server Hardware will provide the fundamental knowledge and resources you need to make intelligent decisions about choice, and optimal installation and configuration, of SQL Server hardware, operating system and the SQL Server RDBMS.