Download or read book Third Manufacturing Engineering Society International Conference written by Vicente Jesús Seguí Llinares and published by American Institute of Physics. This book was released on 2009-12-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd Manufacturing Engineering Society International Conference (MESIC-09) will provide the forum for the exchange and dissemination of the latest research in the field of Manufacturing Engineering. The main objective of the MESIC-09 is to meet the international experts from academic entities, research laboratories and industries related to Manufacturing Engineering; and also to provide a platform for the presentation and discussion on current emerging trends, problems, issues and solutions in the Manufacturing Engineering.

Download or read book Third Manufacturing Engineering Society International Conference MESIC 09 written by and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 10th Manufacturing Engineering Society International Conference MESIC written by Domingo Morales-Palma and published by . This book was released on 2023-10-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed extended articles based on abstracts presented at the 10th Manufacturing Engineering Society International Conference (MESIC 2023) Aggregated Book

Download or read book Precision Machining VI written by Michael N. Morgan and published by Trans Tech Publications Ltd. This book was released on 2011-12-22 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of this collection of peer-reviewed papers is to promote the topics of precision manufacturing and machining practice, together with manufacturing research and education. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 44 papers are divided into chapters covering: machining, grinding processes, cutting-tool technology, coatings, rotor design and vibratory mass finishing, cutting, precision surfaces, simulation and drilling. It offers a succinct guide to these fields.

Download or read book Advances in Manufacturing III written by Magdalena Diering and published by Springer Nature. This book was released on 2022-04-15 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers timely contributions on metrology and measurement systems, across different disciplines and fields of applications. The chapters, which were presented at the 7th International Scientific-Technical Conference, MANUFACTURING 2022, held on May 16-19, 2022, in Poznan, Poland, cover cutting-edge research and best-practices concerning the use of optical, computed tomographic, and coordinate metrology systems to assess the fidelity of 3D printing processes and products. They discuss strategies for automating, and for improving the effectiveness of quality control and measuring processes. All in all, this book provides both researchers and practitioners with a timely guide on cutting-edge measuring systems supporting the development of modern and additive manufacturing in the context of industry 4.0.

Download or read book The 30th SIAR International Congress of Automotive and Transport Engineering written by Ilie Dumitru and published by Springer Nature. This book was released on 2019-10-15 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book includes papers that cover the latest developments in automotive vehicles and environment, advanced transport systems and road traffic, heavy and special vehicles, new materials, manufacturing technologies and logistics and advanced engineering methods. Authors of the papers selected for this book are experts from research, industry and universities, coming from different countries. The overall objectives of the presentations are to respond to the major challenges faced by the automotive industry, and to propose potential solutions to problems related to automotive technology, transportation and environment, and road safety. The congress is organized by SIAR (Society of Automotive Engineers from Romania) in cooperation with SAE International. The purpose is to gather members from academia, industry and government and present their possibilities for investigations and research, in order to establish new future collaborations in the automotive engineering and transport domain. This proceedings book is just a part of the outcomes of the congress. The results presented in this proceedings book benefit researchers from academia and research institutes, industry specialists, Ph.D. students and students in Automotive and Transport Engineering programs.

Download or read book Advances in Design Simulation and Manufacturing III written by Vitalii Ivanov and published by Springer Nature. This book was released on 2020-06-04 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on design and simulation issues. Specifically, it covers the development of CAx technologies for product design, the implementation of smart manufacturing systems and Industry 4.0 strategies, topics in technological assurance, numerical simulation and experimental studies on cutting, milling, grinding, pressing and profiling processes, as well as the development and implementation of new advanced materials. Based on the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020 in Kharkiv, Ukraine, this first volume in a two-volume set provides academics and professionals with extensive information on the latest trends, technologies, challenges and practice-oriented lessons learned in the above-mentioned areas.

Download or read book Special Issue of the Manufacturing Engineering Society 2019 SIMES 2019 written by Eva M. Rubio and published by MDPI. This book was released on 2020-07-03 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book derives from the Special Issue of the Manufacturing Engineering Society 2019 (SIMES-2019) that has been launched as a joint issue of the journals Materials and Applied Sciences. The 29 contributions published in this Special Issue of Materials present cutting-edge advances in the field of manufacturing engineering focusing on additive manufacturing and 3D printing; advances and innovations in manufacturing processes; sustainable and green manufacturing; manufacturing of new materials; metrology and quality in manufacturing; industry 4.0; design, modeling, and simulation in manufacturing engineering; and manufacturing engineering and society. Among them, the topic "Additive Manufacturing and 3D Printing" has attracted a large number of contributions in this journal due to its widespread popularity and potential.

Download or read book Machining Recent Advances Applications and Challenges written by Luis Norberto L´opez de Lacalle and published by MDPI. This book was released on 2019-08-26 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue Machining—Recent Advances, Applications and Challenges is intended as a humble collection of some of the hottest topics in machining. The manufacturing industry is a varying and challenging environment where new advances emerge from one day to another. In recent years, new manufacturing procedures have retained increasing attention from the industrial and scientific community. However, machining still remains the key operation to achieve high productivity and precision for high-added value parts. Continuous research is performed, and new ideas are constantly considered. This Special Issue summarizes selected high-quality papers which were submitted, peer-reviewed, and recommended by experts. It covers some (but not only) of the following topics: High performance operations for difficult-to-cut alloys, wrought and cast materials, light alloys, ceramics, etc.; Cutting tools, grades, substrates and coatings. Wear damage; Advanced cooling in machining: Minimum quantity of lubricant, dry or cryogenics; Modelling, focused on the reduction of risks, the process outcome, and to maintain surface integrity; Vibration problems in machines: Active and passive/predictive methods, sources, diagnosis and avoidance; Influence of machining in new concepts of machine–tool, and machine static and dynamic behaviors; Machinability of new composites, brittle and emerging materials; Assisted machining processes by high-pressure, laser, US, and others; Introduction of new analytics and decision making into machining programming. We wish to thank the reviewers and staff from Materials for their comments, advice, suggestions and invaluable support during the development of this Special Issue.

Download or read book Proceedings of the 3rd RILEM Spring Convention and Conference RSCC 2020 written by José Sena-Cruz and published by Springer Nature. This book was released on 2021-07-13 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 3rd RILEM Spring Convention and Conference, held at Guimarães and hosted by the University of Minho, Portugal, on March 9-14, 2020. The theme of the Conference was “Ambitioning a Sustainable Future for Built Environment: comprehensive strategies for unprecedented challenges”, which was aimed at discussing current challenges and impacts of the built environment on sustainability. The present volume is dedicated to the topic “Service life extension of existing structures”, which covers the most recent scientific and technological developments in the understanding of the evolution and degradation of construction materials and structural systems. Analytical and numerical, as well as experimental approaches, aimed at characterizing, modelling and predicting the evolution of the physical, chemical and mechanical properties of construction materials and structural systems are regarded. Multiphysics models are also considered, as well as other strategies that contribute for an accurate characterization and prediction the service life and the evolution of existing and novel construction materials under normal or extreme environmental exposure or loading conditions. New strategies to promote the smart repairing or the recovery of material properties, as well as the service life extension, are also considered. The following subtopics are included: service life models and multiphysics approaches; smart structures, innovative monitoring and intervention strategies; management and optimized maintenance strategies; integrated rehabilitation and strengthening approaches.

Download or read book Advanced Aluminium Composites and Alloys written by Leszek A. Dobrzański and published by BoD – Books on Demand. This book was released on 2021-10-06 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is an engineering material of strategic importance in the current stage of Industry 4.0. This book discusses advanced composites based on aluminium alloys. It also describes pressure infiltration of gas with liquid aluminium, the mechanical synthesis of aluminium alloy powder and halloysite nanotubes (HNTs) or multi-wall carbon nanotubes (MWCNTs) consolidated by plastic deformation, selected optimization and prediction models, casting aluminium alloys containing zirconium, aluminium alloys subjected to high-speed extrusion of shapes, corrosion resistance of alloys containing lithium, machining conditions of alloys with copper and zinc additions, and more.

Download or read book Product Lifecycle Management Enabling Smart X written by Felix Nyffenegger and published by Springer Nature. This book was released on 2020-11-19 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the 17th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2020, held in Rapperswil, Switzerland, in July 2020. The conference was held virtually due to the COVID-19 crisis. The 60 revised full papers presented together with 2 technical industrial papers were carefully reviewed and selected from 80 submissions. The papers are organized in the following topical sections: smart factory; digital twins; Internet of Things (IoT, IIoT); analytics in the order fulfillment process; ontologies for interoperability; tools to support early design phases; new product development; business models; circular economy; maturity implementation and adoption; model based systems engineering; artificial intelligence in CAx, MBE, and PLM; building information modelling; and industrial technical contributions.

Download or read book Global Logistics written by Edward Sweeney and published by Kogan Page Publishers. This book was released on 2021-07-03 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Logistics and supply chain management is at the heart of almost every organization globally, as such, developing a well-rounded understanding of these areas has never been more important. Learn from leading sector specialists about key topics, such as supply chain leadership, resilience, technology, design, and more with this guide. Global Logistics is the comprehensive guide to understanding the international and complex landscape of modern logistics and supply chain management. The book features expertise from over 30 contributors including leading academics, such as Martin Christopher, Alan McKinnon and Steve New, and experienced consultants to leading firms, such as Alan Braithwaite and Patrick Daly. A global approach has been taken, with input from over a dozen countries, and state-of-the-art research is situated alongside expert practical guidance. Covering a range of topics from supply chain strategy, risk management and sourcing to relationship management, resilience and ethics, Global Logistics is essential for those studying or working in logistics and supply chain. Now in its 8th edition, Global Logistics is fully revised and restructured. Readers will learn how to improve logistics, supply chain management and operational effectiveness as well as how to navigate global supply chains, ensure sustainability and engineer for the future. This new edition also covers: - the impact of leadership and talent management in logistics - how to maximize the potential of technology, industry 4.0 and digitalization - the ways in which different types of performance can be measured and optimized

Download or read book Innovations in Mechanical Engineering written by José Machado and published by Springer Nature. This book was released on 2021-06-16 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in the field of mechanical engineering, with a special focus on methods and technologies for modeling, simulation, and design of mechanical systems. Based on a set of papers presented at the 1st International Conference “Innovation in Engineering”, ICIE, held in Guimarães, Portugal, on June 28–30, 2021, it focuses on innovation in mechanical engineering, spanning from engineering design and testing of medical devices, evaluation of new materials and composites for different industrial applications, fatigue and stress analysis of mechanical structures, and application of new tools such as 3D printing, CAE 3D models, and decision support systems. This book, which belongs to a three-volume set, provides engineering researchers and professionals with extensive and timely information on new technologies and developments in the field of mechanical engineering and materials.

Download or read book Advanced Manufacturing Processes written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2020-03-27 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely yet comprehensive snapshot of innovative research and developments in the area of manufacturing. It covers a wide range of manufacturing processes, such as cutting, coatings, and grinding, highlighting the advantages provided by the use of new materials and composites, as well as new methods and technologies. It discusses topics in energy generation and pollution prevention. It shows how computational methods and mathematical models have been applied to solve a number of issues in both theoretical and applied research. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering. It is also intended to facilitate communication and collaboration between different groups working on similar topics, and to offer a bridge between academic and industrial researchers.

Download or read book Service Orientation in Holonic and Multi Agent Manufacturing written by Theodor Borangiu and published by Springer. This book was released on 2018-12-12 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed papers presented at the 8th edition of the International Workshop “Service Orientation in Holonic and Multi-Agent Manufacturing – SOHOMA’18” held at the University of Bergamo, Italy on June 11–12, 2018. The objective of the SOHOMA annual workshops is to foster innovation in smart and sustainable manufacturing and logistics systems by promoting new concepts, methods and solutions that use service orientation of agent-based control technologies with distributed intelligence. Reflecting the theme of SOHOMA’18: “Digital transformation of manufacturing with agent-based control and service orientation of Internet-scale platforms”, the research included focuses on how the digital transformation, as advocated by the “Industry 4.0”, “Industrial Internet of Things”, “Cyber-Physical Production Systems” and “Cloud Manufacturing” frameworks, improves the efficiency, agility and sustainability of manufacturing processes, products, and services, and how it relates to the interaction between the physical and informational worlds, which is implemented in the virtualization of products, processes and resources managed as services.

Download or read book Advances on Mechanics Design Engineering and Manufacturing written by Benoit Eynard and published by Springer. This book was released on 2016-09-02 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.