Download or read book Thin Slab Direct Rolling of Microalloyed Steel written by J.M. Rodriguez-Ibabe and published by Trans Tech Publications Ltd. This book was released on 2007-06-10 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin slab casting and direct rolling (TSDR) technologies are nowadays one of the most promising processing routes to maintain steel as a leading material in technological applications. Initially, this process was exclusively for the production of mild steels. As industrial experience and knowledge improved, a rapid expansion of the range of products took place with higher strength grades becoming an important part of the overall production. Actually, it is widely accepted as a route to produce high value grades and it can be considered as a technology which has reached a high degree of maturity. This book aims to provide an approach to the different metallurgical aspects involved in the application of thermomechanical treatments in the TSDR route.
Download or read book Multipass Hot Direct Rolling of Thin slab cast Nb Microalloyed Steel written by Akhlaque Ahmed Khan and published by . This book was released on 1997 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book HSLA Steels 2015 Microalloying 2015 Offshore Engineering Steels 2015 written by The Chinese Society for Metals and published by Springer. This book was released on 2017-03-22 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the joint conference of the 7th International Conference on High Strength Low Alloy Steels (HSLA Steels 2015), the International Conference on Microalloying 2015 (Microalloying 2015), and the International Conference on Offshore Engineering Steels 2015 (OES 2015). The papers focus on the exchange of the latest scientific and technological progresses on HSLA steels, microalloying steels, and offshore engineering steels over the past decades. The contributions are intended to strengthen cooperation between universities and research institutes, and iron and steel companies and users, and promote the further development in the fields all over the world.
Download or read book Titanium Microalloyed Steel Fundamentals Technology and Products written by Xinping Mao and published by Springer. This book was released on 2019-01-17 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively reviews the research on Ti microalloyed steel, focusing on development and production technology. It discusses steel composition design and performance, as well as technologies for controlling the microstructure and properties of Ti microalloyed steel during the production process. Ti can significantly improve the properties of steel, but its behavior is more complex and more difficult to control during the production process than that of Nb and V.Covering topics ranging from metallurgy theory to production technology and products, the book serves as a valuable reference resource for researchers, engineers, university teachers and students in the field of steel research.
Download or read book Rolling of Advanced High Strength Steels written by Jingwei Zhao and published by CRC Press. This book was released on 2017-07-12 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced high strength steels (AHSSs) for auto-making are primarily produced by rolling, plus heat treatment technologies if necessary. However, due to the metallurgical complexity of AHSSs, it is impossible to roll all of the AHSS grades in a rolling mill with the same rolling technology. Each of AHSSs has unique applications in vehicles, and specified rolling technologies are required to produce high quality AHSS products where they might be the best employed to meet performance demands of the automotive parts. Such background has prompted the publication of this scholarly book in the area of rolling of AHSSs with a purpose of providing readers with a valuable technical document that can be used in the research and development of AHSSs for automotive and other manufacturing industries. With contributors from USA, Germany, Poland, Italy, Spain, Austria, Australia, China, India and Iran, the book highlights the latest advances in rolling technologies of AHSSs. It focuses on the theory, simulation and practice of the rolling of AHSSs: The book introduces the history, types and advances of AHSSs and their processes; proposes new theory that is applicable to the rolling of AHSSs, presents mathematical and numerical modelling of AHSSs in rolling; covers thermomechanical processing technologies of AHSSs; provides case studies on the rolling practice of the most popular AHSSs and includes other rolling-related technologies of AHSSs. The book will be useful for both theoretical and applied research aimed at AHSSs rolling technologies, and will be a scientific and valuable literature for the metallurgists, engineers, materials scientists, academics and graduate students who are studying and working with AHSSs and their rolling technologies worldwide.
Download or read book Microalloying for New Steel Processes and Applications written by J. M. Rodriguez-Ibabe and published by . This book was released on 2005 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: The steel industry continues to remain a highly dynamic sector that must repeatedly face new challenges. During recent years, key factors have been the consolidation of new technologies, the marketing of new steel grades and the development of new products. Innovation, cost-reduction and environmental conservation are challenges that all of the players in the steel world - i.e. industry, research and academia - have to confront every day. Microalloying is one of the principal actors in this struggle.
Download or read book Proceedings of the 8th Pacific Rim International Conference on Advanced Materials and Processing PRICM 8 written by FernD.S. Marquis and published by Springer. This book was released on 2017-03-21 with total page 3431 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRICM-8 features the most prominent and largest-scale interactions in advanced materials and processing in the Pacific Rim region. The conference is unique in its intrinsic nature and architecture which crosses many traditional discipline and cultural boundaries. This is a comprehensive collection of papers from the 15 symposia presented at this event.
Download or read book THERMEC 2018 written by R. Shabadi and published by Trans Tech Publications Ltd. This book was released on 2018-12-26 with total page 2604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the THERMEC2018: 10th International Conference on Processing and Manufacturing of Advanced Materials, which took place between July 09 and July 13, 2018 in Paris, France, under the co-sponsorship of Universite de Lille, MINES ParisTech, PSL and Universite de Tours, France. The presented book will be useful for many researchers and engineers/technologists working in different aspects of processing and fabrication of materials, structure/property evaluation and applications of both ferrous and nonferrous materials including biomaterials, smart materials as well as the advanced measurement techniques in the materials science.
Download or read book Advances in Microalloyed Steels written by Pello Uranga and published by MDPI. This book was released on 2021-03-04 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: In response to the demanding requirements of different sectors, such as construction, transportation, energy, manufacturing, and mining, new generations of microalloyed steels are being developed and brought to market. The addition of microalloying elements, such as niobium, vanadium, titanium, boron, and/or molybdenum, has become a key tool in the steel industry to reach economically-viable grades with increasingly higher mechanical strength, toughness, good formability, and weldable products. The challenges that microalloying steel production faces can be solved with a deeper understanding of the effects that these microalloying additions and combinations of them have during the different steps of the steelmaking process.
Download or read book Microalloyed Steels 2002 written by Riad Asfahani and published by ASM International(OH). This book was released on 2002 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the manufacture, casting, processing, treatment, fabrication, and use of microalloyed steel, 21 papers represent the proceedings of an October 2002 conference in Columbus Ohio. The papers are grouped into four major subject-areas: steel making and casting, heat treated steels, TMCP steel
Download or read book Ultra Fine Grained Steels written by Yuqing Weng and published by Springer Science & Business Media. This book was released on 2009-04-08 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses results of the New Generation Iron and Steel Materials research project funded over the last ten years. It thoroughly describes theoretical achievements in ultra-fine grain steel and its refinement. It also discusses progress in related areas of engineering and technology. The author has been engaged in the research of new generation structural materials for the last twelve years being Chief Scientist of three national research programs in China.
Download or read book Issues in Metal Research 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Metal Research / 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Metal Research. The editors have built Issues in Metal Research: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Metal Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Metal Research / 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Electron Microscopy and Analysis 2001 written by M. Aindow and published by CRC Press. This book was released on 2001-12-01 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron microscopy is now a mainstay characterization tool for solid state physicists and chemists as well as materials scientists. Electron Microscopy and Analysis 2001 presents a useful snapshot of the latest developments in instrumentation, analysis techniques, and applications of electron and scanning probe microscopies. The book is ideal for
Download or read book In situ Studies with Photons Neutrons and Electrons Scattering II written by Thomas Kannengiesser and published by Springer. This book was released on 2014-06-14 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an insight into current research topics, focusing special attention exactly on welding issues. The presented research work demonstrates that application of synchrotron and neutron radiation in combination with other techniques enables the basic understanding of material-related processes to be extended appreciably. It also shows ways of how to improve new materials and their use in industry. Following on from the 1st workshop in 2009 at BAM Berlin, a 2nd workshop dealing with this subject matter was held in 28-30 November, 2012 in Osaka/Japan with international participation of scientists from sixteen countries. The book includes selected contributions from the various subject blocks, precisely covering issues of practical and immediately implementable benefit to industrial enterprises. Therefore, peer-reviewed papers dealing with the following topics are contained as well: - Phase transformation during welding, metallurgy and material development - Evolution and significance of residual stresses - Investigations into laser and electron beam welding
Download or read book ISIJ International written by and published by . This book was released on 2004 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Direct Strip Casting of Metals and Alloys written by M Ferry and published by Woodhead Publishing. This book was released on 2006-03-24 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct strip casting is a continuous casting process for producing metallic sheet directly from the molten state that minimises the need for substantial secondary processing. This important book is the first to review the implications of strip casting technology for a range of alloys, including carbon and stainless steel, aluminium, magnesium, titanium, copper and other non-ferrous alloys.The book is divided into six chapters, with the first two describing the physical metallurgy of candidate alloys for direct strip casting and the development of microstructure during solidification. Chapter 3 describes the principles of continuous casting processes and the evolution of direct strip casting. It provides the foundation for the following two chapters which describe process variables and their impact on microstructure and strip quality. The final chapter describes possible techniques in secondary processing and fabrication of the as-cast strip. Two appendices discuss simulation and modelling issues, and the measurement and representation of textures in metal strip.Direct strip casting of metals and alloys is a standard reference on a technology destined to have a profound impact on the manufacturing landscape of the twenty-first century. - First book to review the implications of strip technology for a range of alloys - Essential book on a technology destined to have a profound impact on the manufacturing landscape of the twenty-first century
Download or read book Metallurgical Design of Flat Rolled Steels written by Vladimir B. Ginzburg and published by CRC Press. This book was released on 2020-11-25 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines the basic principles of metallurgical design of flat rolled steels to obtain flat steel products with required metallurgical and mechanical properties. These principles establish the requirements for steel chemical composition and the process parameters, including steelmaking, reheating, hot rolling, annealing and cold rolling. Metallurgical Design of Flat Rolled Steels reviews the current theories and experimental works conducted in this area, and gives a comparative analysis of the obtained results in application to a large variety of steels produced around the world. This guide presents essential material in a fashion that permits rapid application to practical problems while providing the structure and understanding necessary for long-term growth. It first explains how the components fit and work together to make a successful experimental design, then analyzes each component in detail, presenting the various approaches in the form of menus of different strategies and options. Then the text illustrates equations developed by various researchers and compares them in both table and graphic forms. Written in a clear and concise manner, the material is presented using a modular or "building block" approach so readers get to see how the entire structure fits together and learn the essential techniques and terminology necessary to develop more complex designs and analyses.
