Download or read book Thin Metal Films and Gas Chemisorption Volume 32 written by P Wissmann (Ed) and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thin Metal Films and Gas Chemisorption written by Peter Wissmann and published by Elsevier Publishing Company. This book was released on 1987 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preparation of Catalysts II.

Download or read book Thin Metal Films and Gas Chemisorption written by Peter Wissmann and published by . This book was released on 1987 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemisorption and Reactivity on Supported Clusters and Thin Films written by R.M. Lambert and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous catalysis provides the backbone of the world's chemical and oil industries. The innate complexity of practical catalytic systems suggests that useful progress should be achievable by investigating key aspects of catalysis by experimental studies on idealised model systems. Thin films and supported clusters are two promising types of model system that can be used for this purpose, since they mimic important aspects of the properties of practical dispersed catalysts. Similarly, appropriate theoretical studies of chemisorption and surface reaction clusters or extended slab systems can provide valuable information on the factors that underlie bonding and catalytic activity. This volume describes such experimental and theoretical approaches to the surface chemistry and catalytic behaviour of metals, metal oxides and metal/metal oxide systems. An introduction to the principles and main themes of heterogeneous catalysis is followed by detailed accounts of the application of modern experimental and theoretical techniques to fundamental problems. The application of advanced experimental methods is complemented by a full description of theoretical procedures, including Hartree-Fock, density functional and similar techniques. The relative merits of the various approaches are considered and directions for future progress are indicated.

Download or read book Chemisorption of Probe Molecules written by and published by Elsevier. This book was released on 1990-07-19 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volume concentrates on catalyst surfaces. The interaction of adsorbed molecules, mostly on heterogenous catalysts, although some reference to model catalysts is also made, is discussed here. Vibrational (infrared and electron energy loss spectroscopies, magnetic resonances (nuclear and electron spin) and thermal desorption methods have been included in this latter category. The reader will find also a comparison of these well established methods with their recent developments which make them much more attractive. Therefore, researchers working in the catalysis field will find much to interest them in this book.

Download or read book New Trends in CO Activation written by L. Guczi and published by Elsevier. This book was released on 1991-06-25 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this volume is to provide scientists with a comprehensive summary of new research areas in the activation of carbon monoxide, as one of the most reactive molecules, and in its applications. In order to understand the variety of the reactivity of CO, a quantum-chemical approach helps the reader to understand the binding state of CO to the solid surface (Chapter 1). The structure of the adsorbed CO can be better understood by examining its reactivity towards single crystals in the absence and in the presence of promoters (Chapter 2). The first approach in the reactivity study is that of studying catalytic activity of single crystals and structure sensitivity which are summarized in Chapter 3. One of the most prominent effects in the CO activation process is ascribed to the presence of additives, promoters which, in a real catalyst system, are far more complicated than on single crystal surfaces (Chapter 4). The original Fischer-Tropsch process applied fused iron or cobalt catalysts which were suitable for producing mainly straight chain hydrocarbons. The two most important processes involving CO activation, the new FT process and alcohol formation are discussed in Chapters 5 and 7. An important type of catalyst, the bimetallic catalysts, is discussed in Chapter 6. The role of hydrogen as one of the most frequently used partners in CO activation is discussed in Chapter 8. The field of production of specialty chemicals is an excellent example of the homogeneous catalytic activation of CO (Chapter 9). In Chapter 10 an overview is given of the industrial applications of CO chemistry and these are illustrated by working processes. The final chapter gives the reader some hints about future progress in the field.

Download or read book Successful Design of Catalysts written by T. Inui and published by Elsevier. This book was released on 1988-12-01 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: In July 1988, a Worldwide Catalysis Seminar was held to mark the 30th anniversary of the Catalysis Society of Japan. After the 9th International Congress on Catalysis in Calgary, about 25 Japanese researchers working on catalysis visited and held seminars in four countries. Each seminar focused on a specific subject, yet also covered a wide range of topics in catalysis, from the fundamental to the industrial stages. This volume, containing the proceedings of this unique event, reflects the successful way in which the seminars provided an opportunity for direct communication and discussion of how best to achieve the successful design of catalysts.

Download or read book Catalyst Deactivation 1991 written by C.H. Bartholomew and published by Elsevier. This book was released on 1991-06-03 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalyst Deactivation 1991 was an expanded version of earlier, highly successful symposia. The symposium featured invited and solicited papers including 4 plenary lectures, 78 oral presentations and 23 poster papers. Most of the papers are contained in this volume. The eight main topics emphasised at this most recent symposium were: deactivation mechanisms/phenomena (carbon deposition, poisoning, and sintering), methods (modeling and techniques), and important catalysts (hydrotreating, oxides, and zeolites). All of these areas were well represented as attested by the substantial number of papers contained in these proceedings. Four review papers based on the plenary lectures provide state-of-the-art perspectives on new thrusts in deactivation research and development.

Download or read book New Developments in Selective Oxidation written by G. Centi and published by Elsevier. This book was released on 1990-04-26 with total page 907 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.890 pages

Download or read book Third World Congress on Oxidation Catalysis written by S.T. Oyama and published by Elsevier. This book was released on 1997-09-12 with total page 1277 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overall theme of the 3rd World Congress is "Atom Efficient Catalytic Oxidations for Global Technologies". This theme was chosen to stimulate the participants to report their findings with an emphasis on conserving valuable material in their catalytic transformations, as well as conserving energy, in an environmentally responsible manner. Progress towards this stated goal is substantial as evidenced by the tremendous response of the community in their participation of quality publications complied in these Proceedings of the Congress. The subjects presented span a wide range of oxidation reactions and catalysts. These include the currently important area of lower alkane oxidation to the corresponding olefins, unsaturated aldehydes, acids and nitriles. The four featured lectures and seven plenary lectures constitute the general background and overview of the subject matter at hand. The 104 contributed papers and 13 poster manuscripts, summarized in this compendium, probe new avenues to achieve catalytically efficient oxidation reactions for the future needs of mankind in a global environment.

Download or read book Introduction to Zeolite Science and Practice written by P.A. Jacobs and published by Elsevier. This book was released on 2001-06-26 with total page 1085 pages. Available in PDF, EPUB and Kindle. Book excerpt: In view of the substantial progress made in the last decade in the fields of zeolites and related materials it was decided to go for an extended 2nd Edition of "Introduction to Zeolite Science and Practice". Unfortunately - as often is the case - this process took more time than expected by the Editors.In the mean time some new texts on zeolites were issued. Nevertheless, the combination of data, discussion and dedication provided by the present book is a unique coverage of the field, in the opinion of the Editors.In the present Edition the number of chapters rose from 16-22. The contributions can be divided into three categories: updated chapters by the original authors, updated chapters by an expanded or new team of authors and completely new chapters. This 2nd Edition also contains new chapters on "Zeolite-based supramolecular assemblies" (by Dirk De Vos and Pierre Jacobs, experts in this area) and on "The use of bulky probe molecules" (by Paul Kunkeler, Roger Downing and one of the Editors).Finally, the super large pore zeolites and the fast growing area of ordered mesoporous materials are dealt with by Eelco Vogt, Charlie Kresge and and Jim Vartuli. The latter two authors belong to the discoverers of the M41S family of mesoporous materials.

Download or read book Angle Resolved Photoemission written by S.D. Kevan and published by Elsevier. This book was released on 1992-05-15 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Angle-resolved photoemission has become an indispensable tool for solid state and surface physicists and chemists. This book covers the underlying phenomenology of the technique, reviews its application to existing problems, and discusses future applications. The book is particularly timely given the significant improvements in experimental and theoretical methodology which have recently been or soon will be attained, namely, ultrahigh resolution studies using improved sources of synchrotron radiation, quasiparticle interpretation of measured dispersion relations and spectra, in situ growth of novel materials, etc. The technique has been applied predominantly to understand materials for which the one-electron paradigm is a reasonable approximation. Most chapters discuss this type of experiment: 2D and 3D states in metals and semiconductors, extrinsic states induced by adsorption, etc. Applications of the technique to materials where electron correlation plays a comparable role to that of solid state hybridization, ferro- and antiferromagnets, high Tc superconductors, etc. are rapidly growing in popularity. These areas are also discussed and a foundation is laid for further experiments in this direction. Almost all chapters contain comprehensive bibliographies and compendia of systems studied. The book has an extensive index which cross references applications and systems studied.

Download or read book Zeolite Chemistry and Catalysis written by L. Kubelková and published by Elsevier. This book was released on 1991-09-17 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings reflect recent developments in the field of zeolite chemistry and catalysis with an emphasis on the role of a modifying component on the properties of the molecular sieve material. The plenary lectures and contributed papers concentrate on the problem of isomorphous substitution in a zeolitic framework; on the occlusion and the structure of metal, metal oxide, and metal sulphide clusters and complexes in the intracrystalline void volume of molecular sieves and zeolites as well as in the interlaminar space of layered compounds. Catalytic applications are discussed, not only in regard to traditional hydrocarbon transformation, but also in such areas as: reduction of SO2, decomposition of NO, reactions of sulphur containing compounds and conversion of CO, CO2 to hydrocarbons or of alcohols to oxygenated products. Because the book provides valuable data and information on new achievements in the zeolite material science and application, it will be of considerable interest to all research groups involved in zeolite science.

Download or read book Catalyst Design for Tailor Made Polyolefins written by M. Terano and published by Elsevier. This book was released on 1994-11-01 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent development of olefin polymerization catalysts has caused marked changes in both industrial and academic research. Industrial use of homogeneous metallocene catalysts has already begun in the fields of high density polyethylene and syndiotactic polypropylene. Moreover, important data have been obtained from academic investigations which have proved useful for understanding conventional heterogeneous Ziegler-Natta catalysts. From the industrial viewpoint, however, heterogeneous high-yield catalysts seem to be more important. The present volume contains invited lectures and contributed papers. The following topics are covered: (1) Heterogeneous Catalysts, (2) Metallocene Catalysts and (3) New Trends in the Polyolefin Industry.

Download or read book Catalytic Polymerization of Cycloolefins written by V. Dragutan and published by Elsevier. This book was released on 2000-06-26 with total page 1293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most important topics concerning cationic Ziegler-Natta and ring-opening metathesis polymerization of cycloolefins. The work describes the major pathways that cycloolefins can follow under the action of specific catalytic systems, essentially vinyl and ring-opening polymerization, both reaction types allowing the manufacture of distinct products with wide applicability in modern technologies. The comprehensive data available on this subject are logically and systematically selected and reviewed throughout 18 chapters, according to the basic catalytic processes involved, types of monomers and catalysts employed, reaction conditions and application fields. The modern trends in design of chiral metallocene catalysts, well-defined living metathesis catalysts, catalysts tolerant toward functionalities and water systems are highlighted. The book discusses in detail the relevant aspects of these processes including reaction thermodynamics, kinetics, mechanisms and stereochemistry and correlates the structure of produced polymers with their chemical and physical-mechanical properties. Related important topics include Ziegler-Natta polymerization of olefins and dienes, atom transfer radical polymerization of vinyl compounds, metathesis of olefins and acetylenes, acyclic diene metathesis reaction, carbonyl olefination reaction, metathesis polymerization of acetylenes, metathesis degradation of polymers and ring-opening polymerization of heterocycles. Special emphasis is laid upon the manufacture of commerical products, new polymers and copolymers of potential interest for industry and design and synthesis of speciality polymers with particular structures and architectures and desired properties. The book critically evaluates the most recent achievements reported in this field and outlines the modern trends on the research and application of the catalytic processes for cycloolefin polymerization. For the first time, comprehensive information about the published data on the subject up to now is provided for both academic and industrial researchers working in the areas of polymer chemistry, organic and organometallic chemistry, surface science and catalysis, petrochemistry and chemical engineering. This stimulating book offers an enlightening introduction and a quick documentation on the subject as well as a solid background in this field. Moreover, the work offers a wealth of useful information for specialists applying polymers in various scientific and industrial areas.

Download or read book Catalysis An Integrated Approach written by R.A. van Santen and published by Elsevier. This book was released on 2000-09-26 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on industrially relevant reactions which are catalyzed by heterogeneous and homogeneous catalysts. Homogeneous catalysis by metal complexes is treated jointly with heterogeneous catalysis using metallic and non-metallic solids. In both areas the high degree of sophistication of spectroscopic techniques and theoretical modelling has led to an enormous increase in our understanding at the molecular level. This holds for the kinetics of the reactions and the reactivities of the catalysts, as well as for the syntheses of the catalytic materials. The development of catalysis science since the first edition of this book has necessitated a thorough revision, including special chapters on biocatalysis, catalyst characterization and adsorption methods. The multidisciplinary nature of catalysis is reflected in the choice of a novel combination of basic disciplines which will be refreshing and inspiring to readers.

Download or read book Catalytic Processes Under Unsteady State Conditions written by Y.S. Matros and published by Elsevier. This book was released on 1988-12-01 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with catalytic processes under forced non-steady-state conditions. It demonstrates, both theoretically and practically, that forced non-steady-state processes are highly efficient compared with steady-state processes, and illustrates this with a wealth of practical examples. The first part of the book describes the theoretical and experimental basis of efficient processes, mathematical models of non-steady-state processes in reactors, influence of a non-steady-state catalyst surface, problems of optimization, the theory of a heat front in the fixed catalyst bed, and methods to create efficient cyclic regimes. The second part considers the following processes: sulphur dioxide oxidation in sulphuric acid production, cleaning of effluent gases from toxic impurities, production of high-potency heat, ammonia and methanol synthesis etc. The book will appeal to many readers: chemical engineers (especially in the field of mathematical modelling of reactors with a fixed catalyst bed); personnel of chemical plants and machine-manufacturing companies dealing with maintenance and installation of catalytic reactors; specialists in detoxification of the effluents from organic admixtures and carbon monoxide; students of technical colleges and universities