Download or read book Thermoelectricity of Small molecular weight Organic Semiconductors and Titanium Oxide Nanotubes written by Wenhao Hu and published by . This book was released on 2011 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Organic Thermoelectric Materials written by Zhiqun Lin and published by Royal Society of Chemistry. This book was released on 2019-10-18 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarises the significant progress made in organic thermoelectric materials, focusing on effective routes to minimize thermal conductivity and maximize power factor.
Download or read book Advances in Nanostructured Composites written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2019-07-25 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first volume of this book covered Section I: Introduction to Nanocomposites Fabrication and Section II: CNT and Graphene Nanocomposites. The present second volume covers Section III: Recent Applications of Nanocomposites. The second volume aims to provide a guide for different applications of modern nanocomposites especially those fabricated by carbon nanotubes and graphene. The book makes a comparative study of fiber-reinforced composites which have been embedded into the matrix with nanocomposites containing nanotubes in place of fibers. The main topics of this volume are: Electrochemical Properties of Nanoporous Based Materials, Fabrication and Application of Graphene Oxide-based Metal and Metal Oxide Nanocomposites, Electrochemical Sensors/Biosensors Based on Carbon Aerogels/Xerogels, Advances in Nanobiocatalysis: Strategies for Lipase Immobilization and Stabilization, Metal Oxide Based Heterojunction Nanoscale Materials for Chemiresistive Gas Sensors, Recent Advances in Polymer Nanocomposite Coatings for Corrosion Protection, Recent Advances in the Design of Nanocomposite Materials via Laser Techniques for Biomedical Applications, Carbonaceous Nanostructured Composites for Electrochemical Power Sources: Fuel Cells, Supercapacitors and Batteries, Bismuth Vanadate Based Nanostructured and Nanocomposite Photocatalyst Materials for Water Splitting Application.
Download or read book Introduction to Thermoelectricity written by H. Julian Goldsmid and published by Springer Science & Business Media. This book was released on 2009-10-03 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Thermoelectricity is the latest work by Professor Julian Goldsmid drawing on his 55 years experience in the field. The theory of the thermoelectric and related phenomena is presented in sufficient detail to enable researchers to understand their observations and develop improved thermoelectric materials. The methods for the selection of materials and their improvement are discussed. Thermoelectric materials for use in refrigeration and electrical generation are reviewed. Experimental techniques for the measurement of properties and for the production of thermoelements are described. Special emphasis is placed on nanotechnology which promises to yield great improvements in the efficiency of thermoelectric devices. Chapters are also devoted to transverse thermoelectric effects and thermionic energy conversion, both techniques offering the promise of important applications in the future.
Download or read book Thermoelectric Materials and Devices written by Iris Nandhakumar and published by Royal Society of Chemistry. This book was released on 2017 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authoritative account of recent developments in thermoelectric materials and devices for power energy harvesting applications, ideal for researchers and industrialists in materials science.
Download or read book Semiconductors written by Martin I. Pech-Canul and published by Springer. This book was released on 2019-01-17 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical guide to optical, optoelectronic, and semiconductor materials and provides an overview of the topic from its fundamentals to cutting-edge processing routes to groundbreaking technologies for the most recent applications. The book details the characterization and properties of these materials. Chemical methods of synthesis are emphasized by the authors throughout the publication. Describes new materials and updates to older materials that exhibit optical, optoelectronic and semiconductor behaviors; Covers the structural and mechanical aspects of the optical, optoelectronic and semiconductor materials for meeting mechanical property and safety requirements; Includes discussion of the environmental and sustainability issues regarding optical, optoelectronic, and semiconductor materials, from processing to recycling.
Download or read book Solution Processing of Inorganic Materials written by David Mitzi and published by John Wiley & Sons. This book was released on 2008-12-22 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the materials set to revolutionize the electronics industry The search for electronic materials that can be cheaply solution-processed into films, while simultaneously providing quality device characteristics, represents a major challenge for materials scientists. Continuous semiconducting thin films with large carrier mobilities are particularly desirable for high-speed microelectronic applications, potentially providing new opportunities for the development of low-cost, large-area, flexible computing devices, displays, sensors, and solar cells. To date, the majority of solution-processing research has focused on molecular and polymeric organic films. In contrast, this book reviews recent achievements in the search for solution-processed inorganic semiconductors and other critical electronic components. These components offer the potential for better performance and more robust thermal and mechanical stability than comparable organic-based systems. Solution Processing of Inorganic Materials covers everything from the more traditional fields of sol-gel processing and chemical bath deposition to the cutting-edge use of nanomaterials in thin-film deposition. In particular, the book focuses on materials and techniques that are compatible with high-throughput, low-cost, and low-temperature deposition processes such as spin coating, dip coating, printing, and stamping. Throughout the text, illustrations and examples of applications are provided to help the reader fully appreciate the concepts and opportunities involved in this exciting field. In addition to presenting the state-of-the-art research, the book offers extensive background material. As a result, any researcher involved or interested in electronic device fabrication can turn to this book to become fully versed in the solution-processed inorganic materials that are set to revolutionize the electronics industry.
Download or read book Organic Flexible Electronics written by Piero Cosseddu and published by Woodhead Publishing. This book was released on 2020-09-29 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Electronics is a novel field of electronics that has gained an incredible attention over the past few decades. New materials, device architectures and applications have been continuously introduced by the academic and also industrial communities, and novel topics have raised strong interest in such communities, as molecular doping, thermoelectrics, bioelectronics and many others.Organic Flexible Electronics is mainly divided into three sections. The first part is focused on the fundamentals of organic electronics, such as charge transport models in these systems and new approaches for the design and synthesis of novel molecules. The first section addresses the main challenges that are still open in this field, including the important role of interfaces for achieving high-performing devices or the novel approaches employed for improving reliability issues.The second part discusses the most innovative devices which have been developed in recent years, such as devices for energy harvesting, flexible batteries, high frequency circuits, and flexible devices for tattoo electronics and bioelectronics.Finally the book reviews the most important applications moving from more standard flexible back panels to wearable and textile electronics and more futuristic applications like ingestible systems. Reviews the fundamental properties and methods for optimizing organic electronic materials including chemical doping and techniques to address stability issues Discusses the most promising organic electronic devices for energy, electronics, and biomedical applications Addresses key applications of organic electronic devices in imagers, wearable electronics, bioelectronics
Download or read book Thermoelectric Materials and Devices written by Lidong Chen and published by Elsevier. This book was released on 2020-09-25 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoelectric Materials and Devices summarizes the latest research achievements over the past 20 years of thermoelectric material and devices, most notably including new theory and strategies of thermoelectric materials design and the new technology of device integration. The book's author has provided a bridge between the knowledge of basic physical/chemical principles and the fabrication technology of thermoelectric materials and devices, providing readers with research and development strategies for high performance thermoelectric materials and devices. It will be a vital resource for graduate students, researchers and technologists working in the field of energy conversion and the development of thermoelectric devices. Discusses the new theory and methods of thermoelectric materials design Combines scientific principles, along with synthesis and fabrication technologies in thermoelectric materials Presents the design optimization and interface technology for thermoelectric devices Introduces thermoelectric polymers and organic-inorganic thermoelectric composites
Download or read book CRC Handbook of Thermoelectrics written by D.M. Rowe and published by CRC Press. This book was released on 2018-12-07 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoelectrics is the science and technology associated with thermoelectric converters, that is, the generation of electrical power by the Seebeck effect and refrigeration by the Peltier effect. Thermoelectric generators are being used in increasing numbers to provide electrical power in medical, military, and deep space applications where combinations of their desirable properties outweigh their relatively high cost and low generating efficiency. In recent years there also has been an increase in the requirement for thermoelectric coolers (Peltier devices) for use in infrared detectors and in optical communications. Information on thermoelectrics is not readily available as it is widely scattered throughout the literature. The Handbook centralizes this information in a convenient format under a single cover. Sixty of the world's foremost authorities on thermoelectrics have contributed to this Handbook. It is comprised of fifty-five chapters, a number of which contain previously unpublished material. The contents are arranged in eight sections: general principles and theoretical considerations, material preparation, measurement of thermoelectric properties, thermoelectric materials, thermoelectric generation, generator applications, thermoelectric refrigeration, and applications of thermoelectric cooling. The CRC Handbook of Thermoelectrics has a broad-based scope. It will interest researchers, technologists, and manufacturers, as well as students and the well-informed, non-specialist reader.
Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components Analyzes the behavior of carbon nanotube-based composites in different conditions
Download or read book One Dimensional Nanostructures written by Tianyou Zhai and published by John Wiley & Sons. This book was released on 2012-10-19 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the latest research breakthroughs and applications Since the discovery of carbon nanotubes in 1991, one-dimensional nanostructures have been at the forefront of nanotechnology research, promising to provide the building blocks for a new generation of nanoscale electronic and optoelectronic devices. With contributions from 68 leading international experts, this book reviews both the underlying principles as well as the latest discoveries and applications in the field, presenting the state of the technology. Readers will find expert coverage of all major classes of one-dimensional nanostructures, including carbon nanotubes, semiconductor nanowires, organic molecule nanostructures, polymer nanofibers, peptide nanostructures, and supramolecular nanostructures. Moreover, the book offers unique insights into the future of one-dimensional nanostructures, with expert forecasts of new research breakthroughs and applications. One-Dimensional Nanostructures collects and analyzes a wealth of key research findings and applications, with detailed coverage of: Synthesis Properties Energy applications Photonics and optoelectronics applications Sensing, plasmonics, electronics, and biosciences applications Practical case studies demonstrate how the latest applications work. Tables throughout the book summarize key information, and diagrams enable readers to grasp complex concepts and designs. References at the end of each chapter serve as a gateway to the literature in the field. With its clear explanations of the underlying principles of one-dimensional nanostructures, this book is ideal for students, researchers, and academics in chemistry, physics, materials science, and engineering. Moreover, One-Dimensional Nanostructures will help readers advance their own investigations in order to develop the next generation of applications.
Download or read book Two Dimensional Nanostructures written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2012-05-02 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: After the 2010 Nobel Prize in Physics was awarded to Andre Geim and Konstantin Novoselov "for groundbreaking experiments regarding the two-dimensional material graphene," even more research and development efforts have been focused on two-dimensional nanostructures. Illustrating the importance of this area in future applications, Two-Dimensional Nanostructures covers the fabrication methods and properties of these materials. The authors begin with discussions on the properties, size effect, applications, classification groups, and growth of nanostructures. They then describe various characterization and fabrication methods, such as spectrometry, low-energy electron diffraction, physical and chemical vapor deposition, and molecular beam epitaxy. The remainder of the text focuses on mechanical, chemical, and physical properties and fabrication methods, including a new mechanical method for fabricating graphene layers and a model for relating the features and structures of nanostructured thin films. With companies already demonstrating the capabilities of graphene in a flexible touch-screen and a 150 GHz transistor, nanostructures are on their way to replacing silicon as the materials of choice in electronics and other areas. This book aids you in understanding the current chemical, mechanical, and physical processes for producing these "miracle materials."
Download or read book Double Gyroid Structured Functional Materials written by Maik Rudolf Johann Scherer and published by Springer Science & Business Media. This book was released on 2013-06-25 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of new high-tech applications and devices has created a seemingly insatiable demand for novel functional materials with enhanced and tailored properties. Such materials can be achieved by three-dimensional structuring on the nanoscale, giving rise to a significant enhancement of particular functional characteristics which stems from the ability to access both surface/interface and bulk properties. The highly ordered, bicontinuous double-gyroid morphology is a fascinating and particularly suitable 3D nanostructure for this purpose due to its highly accessible surface area, connectivity, narrow pore diameter distribution and superb structural stability. The presented study encompasses a wide range of modern nanotechnology techniques in a highly versatile bottom-up nanopatterning strategy that splits the fabrication process into two successive steps: the preparation of mesoporous double-gyroid templates utilizing diblock copolymer self-assembly, and their replication with a functional material employing electrochemical deposition and atomic layer deposition. The double-gyroid structured materials discussed include metals, metal oxides, and conjugated polymers, which are applied and characterized in high-performance devices, such as electrochromic displays, supercapacitors, chemical sensors and photovoltaics. This publication addresses a wide range of readers, from researchers and specialists who are professionally active in the field, to more general readers interested in chemistry, nanoscience and physics.
Download or read book Nanomaterials Chemistry written by C. N. R. Rao and published by John Wiley & Sons. This book was released on 2007-09-24 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: With this handbook, the distinguished team of editors has combined the expertise of leading nanomaterials scientists to provide the latest overview of this field. They cover the whole spectrum of nanomaterials, ranging from theory, synthesis, properties, characterization to application, including such new developments as quantum dots, nanoparticles, nanoporous materials, nanowires, nanotubes, and nanostructured polymers. The result is recommended reading for everybody working in nanoscience: Newcomers to the field can acquaint themselves with this exciting subject, while specialists will find answers to all their questions as well as helpful suggestions for further research.
Download or read book OLED Fundamentals written by Daniel J. Gaspar and published by CRC Press. This book was released on 2015-05-15 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive Source for Taking on the Next Stage of OLED R&DOLED Fundamentals: Materials, Devices, and Processing of Organic Light-Emitting Diodes brings together key topics across the field of organic light-emitting diodes (OLEDs), from fundamental chemistry and physics to practical materials science and engineering aspects to design and ma
Download or read book OPTOELECTRONIC DEVICES AND SYSTEMS written by S. C. GUPTA and published by PHI Learning Pvt. Ltd.. This book was released on 2014-11-15 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook, now in the second edition, offers a completely up-to-date and in-depth introduction to the principles and applications of optoelectronic devices and systems. The text gives a detailed description of optical fibre waveguides, optical fibre cables and their characteristics, manufacturing process and drawing of optical fibres. In addition, it deals with photon sources, photon detectors, fibre optics as a medium and LAN and WAN systems, short and long haul optical fibre communication systems, electro-optic modulators and their characteristics. The second edition possesses a new section on Optical Fibre Based Broadband High Speed Network in Chapter 8, thus highlighting an updated version. Apart from this, a new chapter on Intensity Dependent Refractive Index Effect has been introduced into the text that discusses the effect of focusing on spatial and temperature profiles in a non-linear crystal medium. This chapter further explains the various physical phenomena like the creation of sharp opaque filaments, irradiation induced damaging of the crystal, oscillatory waveguide propagation, saturation effects and other properties in detail. Primarily intended for the undergraduate students of electronics and communication engineering, the book should also prove extremely useful for the postgraduate students of physics. Key features • Provides comprehensive explanation of optical fibre communication with illustrations. • Gives extensive theory and experimental and holographic applications. • Discusses the applications of lasers in industry, military and medical as well as fibre optics applications. • Describes optical computing, optical gates and their applications with illustrations. • Includes solved numericals at the end of book for better understanding of topics.