Download or read book Matter and Methods at Low Temperatures written by Frank Pobell and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to provide information about performing experi ments at low temperatures, as well as basic facts concerning the low tem perature properties of liquid and solid matter. To orient the reader, I begin with chapters on these low temperature properties. The major part of the book is then devoted to refrigeration techniques and to the physics on which they are based. Of equal importance, of course, are the definition and measurement of temperature; hence low temperature thermometry is extensively discussed in subsequent chapters. Finally, I describe a variety of design and construction techniques which have turned out to be useful over the years. The content of the book is based on the three-hour-per-week lecture course which I have given several times at the University of Bayreuth between 1983 and 1991. It should be particularly suited for advanced stu dents whose intended masters (diploma) or Ph.D. subject is experimental condensed matter physics at low temperatures. However, I believe that the book will also be of value to experienced scientists, since it describes sev eral very recent advances in experimental low temperature physics and technology, for example, new developments in nuclear refrigeration and thermometry.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Pressure Shock Compression of Solids written by J.R. Asay and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a set of basic understandings of the behavior and response of solids to propagating shock waves. The propagation of shock waves in a solid body is accompanied by large compressions, decompression, and shear. Thus, the shear strength of solids and any inelastic response due to shock wave propagation is of the utmost importance. Furthermore, shock compres sion of solids is always accompanied by heating, and the rise of local tempera ture which may be due to both compression and dissipation. For many solids, under a certain range of impact pressures, a two-wave structure arises such that the first wave, called the elastic prescursor, travels with the speed of sound; and the second wave, called a plastic shock wave, travels at a slower speed. Shock-wave loading of solids is normally accomplished by either projectile impact, such as produced by guns or by explosives. The shock heating and compression of solids covers a wide range of temperatures and densities. For example, the temperature may be as high as a few electron volts (1 eV = 11,500 K) for very strong shocks and the densification may be as high as four times the normal density.
Download or read book Anisotropy and Localization of Plastic Deformation written by J.P. Boehler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Present developments in materials science, mechanics and engineering, as well as the demands of modern technology, result in a new and growing interest in plasticity and in bordering domains of the mechanical behavior of materials. This growing interest is attested to by the success of both The International Journal of Plasticity, which after its inception rapidly became the leading journal for plasticity research, and the series ofInternational Symposia on Plasticity and Its Current Applications, which is now the premier international forum for plasticity research dissemination. The First International Symposium on Plasticity and Its Current Applications was conceived and organized by Professor Akhtar S. Khan, and was held at the University of Oklahoma (Norman, Oklahoma, USA) from July 30 to August 3, 1984. It was attended by over one hundred scientists from fifteen countries. "Plasticity '89: the Second International Symposium on Plasticity and Its Current Applications" was held at Mie University (Tsu, Japan) from July 31 to August 4, 1989; this symposium was co-chaired by Professors Khan and Tokuda. The main emphasis of this meeting was on dynamic plasticity and micromechanics, although it included other aspects of plasticity as well. It was attended by over two hundred researchers from twenty-three nations.
Download or read book Thermoelastic Models of Continua written by D. Iesan and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the basic problems of the theory of thermoelasticity for three models of continuous bodies: materials with voids, micropolar solids and nonsimple bodies. Beginning with the basic laws of thermodynamics, the theory of thermoelastic materials with voids is treated. Two subsequent chapters cover the analysis of the linear theory of micropolar thermoelastic bodies. The book concludes with a study of nonsimple thermoelastic materials, which are characterised by the inclusion of higher gradients of displacement in the basic postulates. Relevant examples and exercises which illustrate the theory are given throughout the text. The book should be of interest to mathematicians and specialists working in the fields of elasticity, thermoelasticity, civil engineering and geophysics.
Download or read book Shock Waves in Condensed Matter written by Y. M. Gupta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth American Physical Society Topical Conference on Shock Waves in Condensed Matter was held in Spokane, Washington, July 22-25, 1985. Two hundred and fifty scientists and engineers representing thirteen countries registered at the conference. The countries represented included the United States of America, Australia, Canada, The People's Repub lic of China, France, India, Israel, Japan, Republic of China (Taiwan), United Kingdom, U. S. S. R, Switzerland and West Germany. One hundred and sixty-two technical papers, cov ering recent developments in shock wave and high pressure physics, were presented. All of the abstracts have been published in the September 1985 issue of the Bulletin of the American Physical Society. The topical conferences, held every two years since 1979, have become the principal forum for shock wave studies in condensed materials. Both formal and informal technical discussions regarding recent developments conveyed a sense of excitement. Consistent with the past conferences, the purpose of this conference was to bring together scientists and engineers studying the response of condensed matter to dynamic high pressures and temperatures. Papers covering experimental, theoretical, and numerical studies of con densed matter properties were presented. A noteworthy feature of this conference was the participation by several leading scientists engaged in static high pressure research. Donald Curran served as the Master of Ceremonies at the conference banquet, which was at tended by two hundred and seventy-five conference participants and guests including Dr. Samuel Smith, the new President of Washington State University. Dr.
Download or read book Thermoelastic Deformations written by D. Iesan and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of thermoelasticity studies the interaction between thermal and mechan ical fields in elastic bodies. This theory is of interest both for the mathematical and technical point of view. Intense interest has been shown recently in this field owing to the great practical importance of dynamical effects in aeronautics, nu clear reactors, and its potential importance in cryogenic applications. This work is concerned mainly with basic problems of the theory of thermoelasticity. Ther moelasticity of polar materials and the theories of thermoelasticity with finite wave speeds are not considered here. The reader interested in these subjects will find a full account in the works of Nowacki [280], Chandrasekharaiah [60] and Ignaczak [195]. Our purpose in this work is to present a systematic treatment of some results established in the theory of thermoelasticity. On the whole, the subject matter is directed towards recent developments. Chapter 1 is concerned mainly with the development of the fundamental equa tions of the theory of thermoelasticity. The kinematics and primitive concepts associated with the basic principles are developed and emphasized only to the ex tent that they are needed in our treatment of the subject. Chapter 2 is devoted to a study of linear thermoelastic deformations for prestressed bodies. We have at tempted to isolate those conceptual and mathematical difficulties which arise over and above those inherent in the problems concerned with unstressed bodies.
Download or read book Laser Induced Damage in Optical Materials written by and published by . This book was released on 1983 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Solid Mechanics written by Abdel-Rahman A. Ragab and published by CRC Press. This book was released on 2018-02-06 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Solid Mechanics bridges the gap between elementary approaches to strength of materials and more advanced, specialized versions on the subject. The book provides a basic understanding of the fundamentals of elasticity and plasticity, applies these fundamentals to solve analytically a spectrum of engineering problems, and introduces advanced topics of mechanics of materials - including fracture mechanics, creep, superplasticity, fiber reinforced composites, powder compacts, and porous solids. Text includes: stress and strain, equilibrium, and compatibility elastic stress-strain relations the elastic problem and the stress function approach to solving plane elastic problems applications of the stress function solution in Cartesian and polar coordinates Problems of elastic rods, plates, and shells through formulating a strain compatibility function as well as applying energy methods Elastic and elastic-plastic fracture mechanics Plastic and creep deformation Inelastic deformation and its applications This book presents the material in an instructive manner, suitable for individual self-study. It emphasizes analytical treatment of the subject, which is essential for handling modern numerical methods as well as assessing and creating software packages. The authors provide generous explanations, systematic derivations, and detailed discussions, supplemented by a vast variety of problems and solved examples. Primarily written for professionals and students in mechanical engineering, Engineering Solid Mechanics also serves persons in other fields of engineering, such as aerospace, civil, and material engineering.
Download or read book Laser Induced Damage in Optical Materials 1981 written by and published by . This book was released on 1983 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Finite Element Method in Thermomechanics written by Tai-Ran Hsu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid advances in the nuclear and aerospace technologies in the past two decades compounded with the increasing demands for high performance, energy-efficient power plant components and engines have made reliable thermal stress analysis a critical factor in the design and operation of such equipment. Recently, and as experienced by the author, the need for sophis ticated analyses has been extended to the energy resource industry such as in-situ coal gasification and in-situ oil recovery from oil sands and shales. The analyses in the above applications are of a multidisciplinary nature, and some involve the additional complexity of multiphase and phase change phenomena. These extremely complicated factors preclude the use of classical methods, and numerical techniques such as the finite element method appear to be the most viable alternative solution. The development of this technique so far appears to have concentrated in two extremes; one being overly concerned with the accuracy of results and tending to place all effort in the implementation of special purpose element concepts and computational algorithms, the other being for commercial purposes with the ability of solving a wide range of engineering problems. However, to be versatile, users require substantial training and experience in order to use these codes effectively. Above all, no provision for any modifi cation of these codes by users is possible, as all these codes are proprietary and access to the code is limited only to the owners.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1971 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Induced Damage In Optical Materials 1981 written by Harold E. Bennett and published by ASTM International. This book was released on 1983 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory of Thermal Stresses written by Bruno A. Boley and published by Courier Corporation. This book was released on 2012-05-23 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highly regarded text presents detailed discussion of fundamental aspects of theory, background, problems with detailed solutions. Basics of thermoelasticity, heat transfer theory, thermal stress analysis, more. 1985 edition.
Download or read book Nonlinear Elastic and Inelastic Models for Shock Compression of Crystalline Solids written by John D. Clayton and published by Springer. This book was released on 2019-05-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes thermoelastic and inelastic deformation processes in crystalline solids undergoing loading by shock compression. Constitutive models with a basis in geometrically nonlinear continuum mechanics supply these descriptions. Large deformations such as finite strains and rotations, are addressed. The book covers dominant mechanisms of nonlinear thermoelasticity, dislocation plasticity, deformation twinning, fracture, flow, and other structure changes. Rigorous derivations of theoretical results are provided, with approximately 1300 numbered equations and an extensive bibliography of over 500 historical and modern references spanning from the 1920s to the present day. Case studies contain property data, as well as analytical, and numerical solutions to shock compression problems for different materials. Such materials are metals, ceramics, and minerals, single crystalline and polycrystalline. The intended audience of this book is practicing scientists (physicists, engineers, materials scientists, and applied mathematicians) involved in advanced research on shock compression of solid materials.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1985 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selected Reference Material United States Atomic Energy Program Reactor handbook engineering written by U.S. Atomic Energy Commission and published by . This book was released on 1955 with total page 1102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
