Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 1994 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 37 (thesis year 1992) reports a total of 12,549 thesis titles from 25 Canadian and 153 US universities (theses submitted in previous years but only now reported are indicated by the thesis year shown in parenthesis). The organization, like that of past years, consists of thesis titles arrange

Download or read book Bulletin de L Institut International Du Froid written by and published by . This book was released on 2009 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lubrication Engineering written by and published by . This book was released on 1996 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1998 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Standard Handbook for Mechanical Engineers written by and published by . This book was released on 1996 with total page 1840 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Two Phase Flow in Refrigeration Systems written by Junjie Gu and published by Springer Science & Business Media. This book was released on 2013-08-17 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two-Phase Flow in Refrigeration Systems presents recent developments from the authors' extensive research programs on two-phase flow in refrigeration systems. This book covers advanced mass and heat transfer and vapor compression refrigeration systems and shows how the performance of an automotive air-conditioning system is affected through results obtained experimentally and theoretically, specifically with consideration of two-phase flow and oil concentration. The book is ideal for university postgraduate students as a textbook, researchers and professors as an academic reference book, and by engineers and designers as handbook.

Download or read book Refrigeration Systems and Applications written by Ibrahim Din¿er and published by John Wiley & Sons. This book was released on 2017-03-23 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive text/reference for students, researchers and practicing engineers This book provides comprehensive coverage on refrigeration systems and applications, ranging from the fundamental principles of thermodynamics to food cooling applications for a wide range of sectoral utilizations. Energy and exergy analyses as well as performance assessments through energy and exergy efficiencies and energetic and exergetic coefficients of performance are explored, and numerous analysis techniques, models, correlations and procedures are introduced with examples and case studies. There are specific sections allocated to environmental impact assessment and sustainable development studies. Also featured are discussions of important recent developments in the field, including those stemming from the author’s pioneering research. Refrigeration is a uniquely positioned multi-disciplinary field encompassing mechanical, chemical, industrial and food engineering, as well as chemistry. Its wide-ranging applications mean that the industry plays a key role in national and international economies. And it continues to be an area of active research, much of it focusing on making the technology as environmentally friendly and sustainable as possible without compromising cost efficiency and effectiveness. This substantially updated and revised edition of the classic text/reference now features two new chapters devoted to renewable-energy-based integrated refrigeration systems and environmental impact/sustainability assessment. All examples and chapter-end problems have been updated as have conversion factors and the thermophysical properties of an array of materials. Provides a solid foundation in the fundamental principles and the practical applications of refrigeration technologies Examines fundamental aspects of thermodynamics, refrigerants, as well as energy and exergy analyses and energy and exergy based performance assessment criteria and approaches Introduces environmental impact assessment methods and sustainability evaluation of refrigeration systems and applications Covers basic and advanced (and hence integrated) refrigeration cycles and systems, as well as a range of novel applications Discusses crucial industrial, technical and operational problems, as well as new performance improvement techniques and tools for better design and analysis Features clear explanations, numerous chapter-end problems and worked-out examples Refrigeration Systems and Applications, Third Edition is an indispensable working resource for researchers and practitioners in the areas of Refrigeration and Air Conditioning. It is also an ideal textbook for graduate and senior undergraduate students in mechanical, chemical, biochemical, industrial and food engineering disciplines.

Download or read book Environmental Organic Chemistry written by René P. Schwarzenbach and published by John Wiley & Sons. This book was released on 2005-06-24 with total page 1329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Organic Chemistry focuses on environmental factors that govern the processes that determine the fate of organic chemicals in natural and engineered systems. The information discovered is then applied to quantitatively assessing the environmental behaviour of organic chemicals. Now in its 2nd edition this book takes a more holistic view on physical-chemical properties of organic compounds. It includes new topics that address aspects of gas/solid partitioning, bioaccumulation, and transformations in the atmosphere. Structures chapters into basic and sophisticated sections Contains illustrative examples, problems and case studies Examines the fundamental aspects of organic, physical and inorganic chemistry - applied to environmentally relevant problems Addresses problems and case studies in one volume

Download or read book Chemical Thermodynamics for Process Simulation written by Jürgen Gmehling and published by John Wiley & Sons. This book was released on 2019-06-10 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only textbook that applies thermodynamics to real-world process engineering problems This must-read for advanced students and professionals alike is the first book to demonstrate how chemical thermodynamics work in the real world by applying them to actual engineering examples. It also discusses the advantages and disadvantages of the particular models and procedures, and explains the most important models that are applied in process industry. All the topics are illustrated with examples that are closely related to practical process simulation problems. At the end of each chapter, additional calculation examples are given to enable readers to extend their comprehension. Chemical Thermodynamics for Process Simulation instructs on the behavior of fluids for pure fluids, describing the main types of equations of state and their abilities. It discusses the various quantities of interest in process simulation, their correlation, and prediction in detail. Chapters look at the important terms for the description of the thermodynamics of mixtures; the most important models and routes for phase equilibrium calculation; models which are applicable to a wide variety of non-electrolyte systems; membrane processes; polymer thermodynamics; enthalpy of reaction; chemical equilibria, and more. -Explains thermodynamic fundamentals used in process simulation with solved examples -Includes new chapters about modern measurement techniques, retrograde condensation, and simultaneous description of chemical equilibrium -Comprises numerous solved examples, which simplify the understanding of the often complex calculation procedures, and discusses advantages and disadvantages of models and procedures -Includes estimation methods for thermophysical properties and phase equilibria thermodynamics of alternative separation processes -Supplemented with MathCAD-sheets and DDBST programs for readers to reproduce the examples Chemical Thermodynamics for Process Simulation is an ideal resource for those working in the fields of process development, process synthesis, or process optimization, and an excellent book for students in the engineering sciences.

Download or read book Excipient Development for Pharmaceutical Biotechnology and Drug Delivery Systems written by Ashok Katdare and published by CRC Press. This book was released on 2006-07-28 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: To facilitate the development of novel drug delivery systems and biotechnology-oriented drugs, the need for new, yet to be developed, and approved excipients continues to increase. Excipient Development for Pharmaceutical, Biotechnology, and Drug Delivery Systems serves as a comprehensive source to improve understanding of excipients and forge potential new avenues for regulatory approval. This book presents detailed, up-to-date information on various aspects of excipient development, testing, and technological considerations for their use. It addresses specific details such as historical perspective, preclinical testing, safety, and toxicology evaluation, as well as regulatory, quality, and utility aspects. The text also describes best practices for use of various functional excipients and extensive literature references for all topics.

Download or read book Metered Dose Inhaler Technology written by Tol S. Purewal and published by CRC Press. This book was released on 1997-12-31 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metered Dose Inhaler Technology explores the technologies of pressurized metered dose inhalation (MDI) delivery systems and provides practical, easy-to-use guidance to effective product formulation. With contributions from an international panel of authors, the book addresses the global phase-out of chloroflurocarbon chemicals (CFCs), the generation of propellant systems to replace them, and their associated new medications and therapies. Topics include the manufacture of metered dose inhalers, particle size analysis in inhalation therapy, development and testing, pharmcokinetics and metabolism of propellants, toxicology, and more.

Download or read book Remington Education Pharmaceutics written by Shelley Chambers Fox and published by Pharmaceutical Press. This book was released on 2014-06-25 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remington Education: Pharmaceutics covers the basic principles of pharmaceutics, from dosage forms to drug delivery and targeting. It addresses all the principles covered in an introductory pharmacy course. As well as offering a summary of key information in pharmaceutics, it offers numerous case studies and MCQs for self assessment.

Download or read book Automotive Air Conditioning and Climate Control Systems written by Steven Daly and published by Elsevier. This book was released on 2011-04-18 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Air-conditioning and Climate Control Systems is a complete text and reference on the theoretical, practical and legislative aspects of vehicle climate control systems for automotive engineering students and service professionals. It provides the reader with a thorough up-to-date knowledge of current A/C systems, refrigerants and the new possible replacement systems like CO2, and includes unrivalled coverage of electronic and electrical control. Filling the gap in the automotive engineering and servicing market for students and those training on the job, this book will help both newcomers and those with more experience of air-conditioning systems maintenance engineering to keep up with the latest developments and legislation. - Detailed coverage of European and US vehicle HVAC systems - Thorough explanation of current and future systems including CO2 - Meets relevant C&G, IMI, and HND vocational and professional qualifications - IMI recommended reading material - Includes practical cases studies and examples from design and manufacturing companies including Ford, Vauxhall, Toyota, VW, Visteon, Sanden and others, accompanied by over 300 detailed illustrations and photographs

Download or read book Fuels and Lubricants Handbook written by and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Springer Handbook of Mechanical Engineering written by Karl-Heinrich Grote and published by Springer Nature. This book was released on 2020-12-09 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.

Download or read book Pharmaceutics written by Alekha Dash and published by Elsevier. This book was released on 2023-09-13 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pharmaceutics: Basic Principles and Application to Pharmacy Practice, Second Edition is a valuable textbook covering the role and application of pharmaceutics within pharmacy practice. This updated resource is geared toward meeting and incorporating the current curricular guidelines on pharmaceutics and laboratory skills mandated by the American Council for Pharmacy Education. It includes a number of student-friendly features, including chapter objectives and summaries, practical examples, case studies, numerous images and key-concept text boxes. Two new chapters are included, as well as a new end of chapter section covering "critical reflections and practice applications". Divided into three sections – Physical Principles and Properties of Pharmaceutics; Practical Aspects of Pharmaceutics; and Biological Applications of Pharmaceutics – this new edition covers all aspects of pharmaceutics and providing a single and compelling source for students. - Facilitates an integrated and extensive coverage of the study of pharmaceutics due to the clear and engaging language used by the authors - Includes chapter objectives and summaries to illustrate and reinforce key ideas - Meets curricular guidelines for pharmaceutics and laboratory skills mandated by the Accreditation Council for Pharmacy Education (ACPE) - Includes new practice questions, answers, and case studies for experiential learning