Download or read book Thermo Mechanics Applications and Engineering Technology written by Zied Driss and published by Springer. This book was released on 2018-01-30 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the dissemination of information of permanent interest in thermo-mechanics applications and engineering technology. Contributions have clear relevance to industrial device and a relatively straightforward or feasible path to application. Chapters are sought that have long-term relevance to specific applications including convective heat transfer, fluid mechanics, combustion, aerodynamics, hydrodynamics, turbomachinery and multi-phase flows. In fact, many aspects in industrial operations and daily life are closely related to thermo-mechanics processes. Along with the development of computer industry and the advancement of numerical methods, solid foundation in both hardware and software has been established to study the processes by using numerical simulation methods, which play important roles in the ways of extending research topics, reducing research costs, discovering new phenomena, and developing new technologies. The presented case studies and development approaches aim to provide the readers, such as engineers and PhD students, with basic and applied studies broadly related to the Thermo-Mechanics Applications and Engineering Technology.
Download or read book Mechanical Engineering Technologies and Applications Volume 2 written by Zied Driss and published by Bentham Science Publishers. This book was released on 2023-11-30 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.
Download or read book CFD Techniques and Thermo Mechanics Applications written by Zied Driss and published by Springer. This book was released on 2018-02-05 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on CFD (Computational Fluid Dynamics) techniques and the recent developments and research works in thermo-mechanics applications. It is devoted to the publication of basic and applied studies broadly related to this area. The chapters present the development of numerical methods, computational techniques, and case studies in the thermo-mechanics applications. They offer the fundamental knowledge for using CFD in real thermo-mechanics applications and complex flow problems through new technical approaches. Also, they discuss the steps in the CFD process and provide benefits and issues when using the CFD analysis in understanding of complicated flow phenomena and its use in the design process. The best practices for reducing errors and uncertainties in CFD analysis are also discussed. The presented case studies and development approaches aim to provide the readers, such as engineers and PhD students, the fundamentals of CFD prior to embarking on any real simulation project. Additionally, engineers supporting or being supported by CFD analysts can benefit from this book.
Download or read book Mechanical Engineering Technologies and Applications written by Zied Driss and published by Bentham Science Publishers. This book was released on 2021-11-09 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. The book contents include the following topics: Numerical analysis of hydrokinetic turbines Computational fluid dynamics of a CuO based nanofluid in mini-channel cross-sections Orthodontic biomechanics of a NiTi arch wires Reynold’s number effects on fluid flow through Savonius rotors Effect of operating parameters on Zn-Mn alloys deposited from additive-free chloride bath Optical properties and stability of a blue-emitting phosphor (Sr2P2O7:Eu2+) Under UV and VUV excitation Numerical study of the influence of nanofluid type on thermal improvement in a three dimensional mini channel Electrochemical studies and characterization of Zn-Mn coatings deposited in the presence of novel organic additives Prediction of fire and smoke propagation under a range of external conditions Structural design of a 10 kW H-Darrieus wind turbine The presented case studies and development approaches aim to provide the readers, such as graduate students, PhD candidates and professionals with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Modeling of Thermo Electro Mechanical Manufacturing Processes written by C. V. Nielsen and published by Springer Science & Business Media. This book was released on 2012-10-09 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling of Thermo-Electro-Mechanical Manufacturing Processes with Applications in Metal Forming and Resistance Welding provides readers with a basic understanding of the fundamental ingredients in plasticity, heat transfer and electricity that are necessary to develop and proper utilize computer programs based on the finite element flow formulation. Computer implementation of a wide range of theoretical and numerical subjects related to mesh generation, contact algorithms, elasticity, anisotropic constitutive equations, solution procedures and parallelization of equation solvers is comprehensively described. Illustrated and enriched with selected examples obtained from industrial applications, Modeling of Thermo-Electro-Mechanical Manufacturing Processes with Applications in Metal Forming and Resistance Welding works to diminish the gap between the developers of finite element computer programs and the professional engineers with expertise in industrial joining technologies by metal forming and resistance welding.
Download or read book Advanced Fluid Mechanics and Heat Transfer for Engineers and Scientists written by Meinhard T. Schobeiri and published by Springer Nature. This book was released on 2022-01-17 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current book, Advanced Fluid Mechanics and Heat Transfer is based on author's four decades of industrial and academic research in the area of thermofluid sciences including fluid mechanics, aero-thermodynamics, heat transfer and their applications to engineering systems. Fluid mechanics and heat transfer are inextricably intertwined and both are two integral parts of one physical discipline. No problem from fluid mechanics that requires the calculation of the temperature can be solved using the system of Navier-Stokes and continuity equations only. Conversely, no heat transfer problem can be solved using the energy equation only without using the Navier-Stokes and continuity equations. The fact that there is no book treating this physical discipline as a unified subject in a single book that considers the need of the engineering and physics community, motivated the author to write this book. It is primarily aimed at students of engineering, physics and those practicing professionals who perform aero-thermo-heat transfer design tasks in the industry and would like to deepen their knowledge in this area. The contents of this new book covers the material required in Fluid Mechanics and Heat Transfer Graduate Core Courses in the US universities. It also covers the major parts of the Ph.D-level elective courses Advanced Fluid Mechanics and Heat Transfer that the author has been teaching at Texas A&M University for the past three decades.
Download or read book Thermodynamics written by William C. Reynolds and published by Cambridge University Press. This book was released on 2018-09-20 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an essential treatment of the subject and rigorous methods to solve all kinds of energy engineering problems.
Download or read book Introduction to Thermal and Fluids Engineering written by Deborah A. Kaminski and published by John Wiley & Sons. This book was released on 2017-02-14 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: This innovative book uses unifying themes so that the boundaries between thermodynamics, heat transfer, and fluid mechanics become transparent. It begins with an introduction to the numerous engineering applications that may require the integration of principles and tools from these disciplines. The authors then present an in-depth examination of the three disciplines, providing readers with the necessary background to solve various engineering problems. The remaining chapters delve into the topics in more detail and rigor. Numerous practical engineering applications are mentioned throughout to illustrate where and when certain equations, concepts, and topics are needed. A comprehensive introduction to thermodynamics, fluid mechanics, and heat transfer, this title: Develops governing equations and approaches in sufficient detail, showing how the equations are based on fundamental conservation laws and other basic concepts. Explains the physics of processes and phenomena with language and examples that have been seen and used in everyday life. Integrates the presentation of the three subjects with common notation, examples, and problems. Demonstrates how to solve any problem in a systematic, logical manner. Presents material appropriate for an introductory level course on thermodynamics, heat transfer, and fluid mechanics.
Download or read book Thermodynamics written by Stephen R. Turns and published by Cambridge University Press. This book was released on 2006-03-06 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of Thermodynamics: Concepts and Applications is on traditional thermodynamics topics, but structurally the book introduces the thermal-fluid sciences. Chapter 2 includes essentially all material related to thermodynamic properties clearly showing the hierarchy of thermodynamic state relationships. Element conservation is considered in Chapter 3 as a way of expressing conservation of mass. Constant-pressure and volume combustion are considered in Chapter 5 - Energy Conservation. Chemical and phase equilibria are treated as a consequence of the 2nd law in Chapter 6. 2nd law topics are introduced hierarchically in one chapter, important structure for a beginner. The book is designed for the instructor to select topics and combine them with material from other chapters seamlessly. Pedagogical devices include: learning objectives, chapter overviews and summaries, historical perspectives, and numerous examples, questions and problems and lavish illustrations. Students are encouraged to use the National Institute of Science and Technology (NIST) online properties database.
Download or read book Fundamentals of Thermodynamics and Applications written by Ingo Müller and published by Springer Science & Business Media. This book was released on 2009-03-12 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermodynamics is the much abused slave of many masters • physicists who love the totally impractical Carnot process, • mechanical engineers who design power stations and refrigerators, • chemists who are successfully synthesizing ammonia and are puzzled by photosynthesis, • meteorologists who calculate cloud bases and predict föhn, boraccia and scirocco, • physico-chemists who vulcanize rubber and build fuel cells, • chemical engineers who rectify natural gas and distil f- mented potato juice, • metallurgists who improve steels and harden surfaces, • - trition counselors who recommend a proper intake of calories, • mechanics who adjust heat exchangers, • architects who construe – and often misconstrue – ch- neys, • biologists who marvel at the height of trees, • air conditioning engineers who design saunas and the ventilation of air plane cabins, • rocket engineers who create supersonic flows, et cetera. Not all of these professional groups need the full depth and breadth of ther- dynamics. For some it is enough to consider a well-stirred tank, for others a s- tionary nozzle flow is essential, and yet others are well-served with the partial d- ferential equation of heat conduction. It is therefore natural that thermodynamics is prone to mutilation; different group-specific meta-thermodynamics’ have emerged which serve the interest of the groups under most circumstances and leave out aspects that are not often needed in their fields.
Download or read book Technical Thermodynamics for Engineers written by Achim Schmidt and published by Springer Nature. This book was released on 2022-05-05 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the classical areas of technical thermodynamics: The first part deals with the basic equations for energy conversion and idealized fluids. The second part deals with real fluids, which can be subject to a phase change, for example. Furthermore, thermodynamic mixtures of fluids are considered, e.g., humid air and gas mixtures. In the last part of the book, combustion processes and chemical reactions are presented and thermodynamically balanced. In each chapter, there are examples and exercises to deepen the theoretical knowledge. Compared to the first edition, the topic of thermodynamic state diagrams has been greatly revised. State diagrams of relevant refrigerants have been added as well as a formulary. The section on chemically reacting systems has been expanded and thoroughly revised. In the basic chapters, tasks and examples have been added to consolidate the understanding of the subject. The book is aimed at students of mechanical engineering and professional engineers.
Download or read book Advanced Engineering Thermodynamics written by Adrian Bejan and published by John Wiley & Sons. This book was released on 2016-09-19 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced, practical approach to the first and second laws of thermodynamics Advanced Engineering Thermodynamics bridges the gap between engineering applications and the first and second laws of thermodynamics. Going beyond the basic coverage offered by most textbooks, this authoritative treatment delves into the advanced topics of energy and work as they relate to various engineering fields. This practical approach describes real-world applications of thermodynamics concepts, including solar energy, refrigeration, air conditioning, thermofluid design, chemical design, constructal design, and more. This new fourth edition has been updated and expanded to include current developments in energy storage, distributed energy systems, entropy minimization, and industrial applications, linking new technologies in sustainability to fundamental thermodynamics concepts. Worked problems have been added to help students follow the thought processes behind various applications, and additional homework problems give them the opportunity to gauge their knowledge. The growing demand for sustainability and energy efficiency has shined a spotlight on the real-world applications of thermodynamics. This book helps future engineers make the fundamental connections, and develop a clear understanding of this complex subject. Delve deeper into the engineering applications of thermodynamics Work problems directly applicable to engineering fields Integrate thermodynamics concepts into sustainability design and policy Understand the thermodynamics of emerging energy technologies Condensed introductory chapters allow students to quickly review the fundamentals before diving right into practical applications. Designed expressly for engineering students, this book offers a clear, targeted treatment of thermodynamics topics with detailed discussion and authoritative guidance toward even the most complex concepts. Advanced Engineering Thermodynamics is the definitive modern treatment of energy and work for today's newest engineers.
Download or read book Modern Engineering Thermodynamics Textbook with Tables Booklet written by Robert T. Balmer and published by Academic Press. This book was released on 2011-01-03 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Engineering Thermodynamics - Textbook with Tables Booklet offers a problem-solving approach to basic and applied engineering thermodynamics, with historical vignettes, critical thinking boxes and case studies throughout to help relate abstract concepts to actual engineering applications. It also contains applications to modern engineering issues. This textbook is designed for use in a standard two-semester engineering thermodynamics course sequence, with the goal of helping students develop engineering problem solving skills through the use of structured problem-solving techniques. The first half of the text contains material suitable for a basic Thermodynamics course taken by engineers from all majors. The second half of the text is suitable for an Applied Thermodynamics course in mechanical engineering programs. The Second Law of Thermodynamics is introduced through a basic entropy concept, providing students a more intuitive understanding of this key course topic. Property Values are discussed before the First Law of Thermodynamics to ensure students have a firm understanding of property data before using them. Over 200 worked examples and more than 1,300 end of chapter problems provide an extensive opportunity to practice solving problems. For greater instructor flexibility at exam time, thermodynamic tables are provided in a separate accompanying booklet. University students in mechanical, chemical, and general engineering taking a thermodynamics course will find this book extremely helpful. Provides the reader with clear presentations of the fundamental principles of basic and applied engineering thermodynamics. Helps students develop engineering problem solving skills through the use of structured problem-solving techniques. Introduces the Second Law of Thermodynamics through a basic entropy concept, providing students a more intuitive understanding of this key course topic. Covers Property Values before the First Law of Thermodynamics to ensure students have a firm understanding of property data before using them. Over 200 worked examples and more than 1,300 end of chapter problems offer students extensive opportunity to practice solving problems. Historical Vignettes, Critical Thinking boxes and Case Studies throughout the book help relate abstract concepts to actual engineering applications. For greater instructor flexibility at exam time, thermodynamic tables are provided in a separate accompanying booklet.
Download or read book Thermodynamics and Heat Power Ninth Edition written by Irving Granet and published by CRC Press. This book was released on 2020-11-05 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ninth edition of Thermodynamics and Heat Power contains a revised sequence of thermodynamics concepts including physical properties, processes, and energy systems, to enable the attainment of learning outcomes by Engineering and Engineering Technology students taking an introductory course in thermodynamics. Built around an easily understandable approach, this updated text focuses on thermodynamics fundamentals, and explores renewable energy generation, IC engines, power plants, HVAC, and applied heat transfer. Energy, heat, and work are examined in relation to thermodynamics cycles, and the effects of fluid properties on system performance are explained. Numerous step-by-step examples and problems make this text ideal for undergraduate students. This new edition: Introduces physics-based mathematical formulations and examples in a way that enables problem-solving. Contains extensive learning features within each chapter, and basic computational exercises for in-class and laboratory activities. Includes a straightforward review of applicable calculus concepts. Uses everyday examples to foster a better understanding of thermal science and engineering concepts. This book is suitable for undergraduate students in engineering and engineering technology.
Download or read book Modern Engineering Thermodynamics Textbook with Tables Booklet written by Robert Balmer and published by Academic Press. This book was released on 2010-12-20 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Engineering Thermodynamics - Textbook with Tables Booklet offers a problem-solving approach to basic and applied engineering thermodynamics, with historical vignettes, critical thinking boxes and case studies throughout to help relate abstract concepts to actual engineering applications. It also contains applications to modern engineering issues.This textbook is designed for use in a standard two-semester engineering thermodynamics course sequence, with the goal of helping students develop engineering problem solving skills through the use of structured problem-solving techniques. The first half of the text contains material suitable for a basic Thermodynamics course taken by engineers from all majors. The second half of the text is suitable for an Applied Thermodynamics course in mechanical engineering programs. The Second Law of Thermodynamics is introduced through a basic entropy concept, providing students a more intuitive understanding of this key course topic. Property Values are discussed before the First Law of Thermodynamics to ensure students have a firm understanding of property data before using them. Over 200 worked examples and more than 1,300 end of chapter problems provide an extensive opportunity to practice solving problems. For greater instructor flexibility at exam time, thermodynamic tables are provided in a separate accompanying booklet.University students in mechanical, chemical, and general engineering taking a thermodynamics course will find this book extremely helpful. Provides the reader with clear presentations of the fundamental principles of basic and applied engineering thermodynamics Helps students develop engineering problem solving skills through the use of structured problem-solving techniques Introduces the Second Law of Thermodynamics through a basic entropy concept, providing students a more intuitive understanding of this key course topic Covers Property Values before the First Law of Thermodynamics to ensure students have a firm understanding of property data before using them Over 200 worked examples and more than 1,300 end of chapter problems offer students extensive opportunity to practice solving problems Historical Vignettes, Critical Thinking boxes and Case Studies throughout the book help relate abstract concepts to actual engineering applications For greater instructor flexibility at exam time, thermodynamic tables are provided in a separate accompanying booklet
Download or read book Introduction to Thermodynamics and Heat Transfer EES Software written by Yunus A. Cengel, Dr. and published by McGraw-Hill Education. This book was released on 2007-09-12 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Thermodynamics and Heat Transfer provides balanced coverage of the basic concepts of thermodynamics and heat transfer.Together with the clear an numerous illustrations, student-friendly writing style, and manageable math, this is an ideal text for an introductory thermal science course for non-mechanical engineering majors. Continuing in the tradition of Cengel/Boles: Thermodynamics, this lavishly illustrated text presents the key topics in thermodynamics and heat transfer, in a highly accessible student-friendly fashion. The flexibly organized text can accommodate courses that spend anywhere from 1/3rd to 2/3rds or more of class time on thermodynamics and the rest on key heat transfer topics. The intuitive approach is supported by a wealth of physical explanations and analogies that draw parallels between the subject and the students' everyday experiences. Many of the 150 thoroughly worked out examples and almost 2,000 real-world problems, highlight applications from civil and electrical engineering. Over 1,000 illustrations help students visualize concepts,This approach and contents make this text an ideal resource for introduction to thermodynamics and/or thermal science courses intended for non-mechanical engineering majors.
Download or read book Properties Tables Booklet for Thermal Fluids Engineering written by Stephen Turns and published by Cambridge University Press. This book was released on 2007-08-13 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: This booklet is an ideal supplement for any course in thermodynamics or the thermal fluid sciences and a handy reference for the practising engineer. The tables in the booklet complement and extend the property tables in the appendices to Stephen Turn's Thermodynamics: Concepts and Applications and Thermal-Fluid Sciences: An Integrated Approach. In addition to duplicating the SI tables in these books it extends the tables to cover US customary units as well. The booklet also contains property data for the refrigerant R-134a and properties of the atmosphere at high altitudes.