Download or read book Thermal Stress and Fatigue Analysis of Microelectronic Packaging written by Meng Leong Tan and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Stress and Strain in Microelectronics Packaging written by John Lau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectronics packaging and interconnection have experienced exciting growth stimulated by the recognition that systems, not just silicon, provide the solution to evolving applications. In order to have a high density/ performance/yield/quality/reliability, low cost, and light weight system, a more precise understanding of the system behavior is required. Mechanical and thermal phenomena are among the least understood and most complex of the many phenomena encountered in microelectronics packaging systems and are found on the critical path of neatly every design and process in the electronics industry. The last decade has witnessed an explosive growth in the research and development efforts devoted to determining the mechanical and thermal behaviors of microelectronics packaging. With the advance of very large scale integration technologies, thousands to tens of thousands of devices can be fabricated on a silicon chip. At the same time, demands to further reduce packaging signal delay and increase packaging density between communicat ing circuits have led to the use of very high power dissipation single-chip modules and multi-chip modules. The result of these developments has been a rapid growth in module level heat flux within the personal, workstation, midrange, mainframe, and super computers. Thus, thermal (temperature, stress, and strain) management is vital for microelectronics packaging designs and analyses. How to determine the temperature distribution in the elec tronics components and systems is outside the scope of this book, which focuses on the determination of stress and strain distributions in the electronics packaging.
Download or read book Thermal Stress and Strain in Microelectronics Packaging written by John Lau and published by . This book was released on 1993-08-05 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Stress Analysis of Electronic Packaging microform written by Victor Aldea and published by Library and Archives Canada = Bibliothèque et Archives Canada. This book was released on 2004 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Guide to the Packaging of Electronics written by Ali Jamnia and published by CRC Press. This book was released on 2002-10-08 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether you are designing a new system or troubleshooting a current one, this ingenious text offers a wealth of valuable information. The author focuses on reliability problems and the design of systems with incomplete criteria and components and provides a simple approach for estimating thermal and mechanical characteristics of electronic systems. Practical Guide to the Packaging of Electronics discusses Packaging/enclosure design and reliability Thermal, junction-to-case, and contact interface resistance Direct and indirect flow system design Fin design and fan selection Vital elements of shock and vibration Thermal stresses and strains in the design and analysis of mechanically reliable systems Reliability models and system failure The selection of engineering software to facilitate system analysis Design parameters in an avionics electronics package Practical Guide to the Packaging of Electronics is an excellent refresher for mechanical, biomedical, electrical and electronics, manufacturing, materials, and quality and reliability engineers, and will be an invaluable text for upper-level undergraduate and graduate students in these disciplines.
Download or read book Practical Guide to the Packaging of Electronics Second Edition written by Ali Jamnia and published by CRC Press. This book was released on 2008-11-20 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the demand for packaging more electronic capabilities into smaller packages rises, product developers must be more cognizant of how the system configuration will impact its performance. Practical Guide to the Packaging of Electronics: Second Edition, Thermal and Mechanical Design and Analysis provides a basic understanding of the issues that concern the field of electronics packaging. First published in 2003, this book has been extensively updated, includes more detail where needed, and provides additional segments for clarification. This volume supplies a solid foundation for heat transfer, vibration, and life expectancy calculations. Topics discussed include various modes of heat removal, such as conduction, radiation, and convection; the impact of thermal stresses; vibration and the resultant stresses; shock management; mechanical, electrical, and chemically induced reliability; and more. Unlike many other available works, it neither assumes the reader’s familiarity with the subject nor is it so basic that the reader may lose interest. Dr. Ali Jamnia has published a large number of engineering papers and presentations and is the holder of a number of patents and patent applications. He has been involved in the issues of electronics packaging since the early ‘90s and since 1995 has worked toward the development of innovative electronics systems to aid individuals with physical or cognitive disabilities. By consulting this manual, engineers, program managers, and quality assurance managers involved in electronic systems gain a fundamental grasp of the issues involved in electronics packaging, learn how to define guidelines for a system’s design, develop the ability to identify reliability issues and concerns, and are able to conduct more complete analyses for the final design.
Download or read book Die Attach Materials for High Temperature Applications in Microelectronics Packaging written by Kim S. Siow and published by Springer. This book was released on 2019-01-29 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the scientific principles, processing conditions, probable failure mechanisms, and a description of reliability performance and equipment required for implementing high-temperature and lead-free die attach materials. In particular, it addresses the use of solder alloys, silver and copper sintering, and transient liquid-phase sintering. While different solder alloys have been used widely in the microelectronics industry, the implementation of sintering silver and transient liquid-phase sintering remains limited to a handful of companies. Hence, the book devotes many chapters to sintering technologies, while simultaneously providing only a cursory coverage of the more widespread techniques employing solder alloys. Addresses the differences between sintering and soldering (the current die-attach technologies), thereby comprehensively addressing principles, methods, and performance of these high-temperature die-attach materials; Emphasizes the industrial perspective, with chapters written by engineers who have hands-on experience using these technologies; Baker Hughes, Bosch and ON Semiconductor, are represented as well as materials suppliers such as Indium; Simultaneously provides the detailed science underlying these technologies by leading academic researchers in the field.
Download or read book Thermal Stress Analysis of Electronic Packaging Components written by Chee Wai See Toh and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 3D Microelectronic Packaging written by Yan Li and published by Springer. This book was released on 2017-01-20 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a comprehensive reference for graduate students and professionals in both academia and industry on the fundamentals, processing details, and applications of 3D microelectronic packaging, an industry trend for future microelectronic packages. Chapters written by experts cover the most recent research results and industry progress in the following areas: TSV, die processing, micro bumps, direct bonding, thermal compression bonding, advanced materials, heat dissipation, thermal management, thermal mechanical modeling, quality, reliability, fault isolation, and failure analysis of 3D microelectronic packages. Numerous images, tables, and didactic schematics are included throughout. This essential volume equips readers with an in-depth understanding of all aspects of 3D packaging, including packaging architecture, processing, thermal mechanical and moisture related reliability concerns, common failures, developing areas, and future challenges, providing insights into key areas for future research and development.
Download or read book Fatigue of Electronic Materials written by Scott A. Schroeder and published by ASTM International. This book was released on 1994 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike earlier electronic circuits, today's microelectronic devices demand that solder serve structural as well as electrical ends, and do so at relatively high temperature for years. Fatigue and failure of the solder has therefore become an issue in the industry. Nine studies from a May 1993 sympos
Download or read book Thermal Management Concepts in Microelectronic Packaging written by Stephen S. Furkay and published by . This book was released on 1984 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microelectronics Packaging Handbook written by R.R. Tummala and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronics has become the largest industry, surpassing agriCUlture, auto. and heavy metal industries. It has become the industry of choice for a country to prosper, already having given rise to the phenomenal prosperity of Japan. Korea. Singapore. Hong Kong. and Ireland among others. At the current growth rate, total worldwide semiconductor sales will reach $300B by the year 2000. The key electronic technologies responsible for the growth of the industry include semiconductors. the packaging of semiconductors for systems use in auto, telecom, computer, consumer, aerospace, and medical industries. displays. magnetic, and optical storage as well as software and system technologies. There has been a paradigm shift, however, in these technologies. from mainframe and supercomputer applications at any cost. to consumer applications at approximately one-tenth the cost and size. Personal computers are a good example. going from $500IMIP when products were first introduced in 1981, to a projected $lIMIP within 10 years. Thin. light portable. user friendly and very low-cost are. therefore. the attributes of tomorrow's computing and communications systems. Electronic packaging is defined as interconnection. powering, cool ing, and protecting semiconductor chips for reliable systems. It is a key enabling technology achieving the requirements for reducing the size and cost at the system and product level.
Download or read book Modeling and Simulation for Microelectronic Packaging Assembly written by Shen Liu and published by John Wiley & Sons. This book was released on 2011-05-17 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although there is increasing need for modeling and simulation in the IC package design phase, most assembly processes and various reliability tests are still based on the time consuming "test and try out" method to obtain the best solution. Modeling and simulation can easily ensure virtual Design of Experiments (DoE) to achieve the optimal solution. This has greatly reduced the cost and production time, especially for new product development. Using modeling and simulation will become increasingly necessary for future advances in 3D package development. In this book, Liu and Liu allow people in the area to learn the basic and advanced modeling and simulation skills to help solve problems they encounter. Models and simulates numerous processes in manufacturing, reliability and testing for the first time Provides the skills necessary for virtual prototyping and virtual reliability qualification and testing Demonstrates concurrent engineering and co-design approaches for advanced engineering design of microelectronic products Covers packaging and assembly for typical ICs, optoelectronics, MEMS, 2D/3D SiP, and nano interconnects Appendix and color images available for download from the book's companion website Liu and Liu have optimized the book for practicing engineers, researchers, and post-graduates in microelectronic packaging and interconnection design, assembly manufacturing, electronic reliability/quality, and semiconductor materials. Product managers, application engineers, sales and marketing staff, who need to explain to customers how the assembly manufacturing, reliability and testing will impact their products, will also find this book a critical resource. Appendix and color version of selected figures can be found at www.wiley.com/go/liu/packaging
Download or read book The Simulation of Thermomechanically Induced Stress in Plastic Encapsulated IC Packages written by Gerard Kelly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the greatest challenges facing package manufacturers is to develop reliable fine pitch thin packages with high leadcounts, capable of dissipating heat, and deliver them in volume to the market in a very short space of time. How can this be done? Firstly, package structures, materials, and manufacturing processes must be optimised. Secondly, it is necessary to predict the likely failures and behaviour of parts before manufacture, whilst minimising the amount of time and money invested in undertaking costly experimental trials. In a high volume production environment, any design improvement that increases yield and reliability can be of immense benefit to the manufacturer. Components and systems need to be packaged to protect the IC from its environment. Encapsulating devices in plastic is very cheap and has the advantage of allowing them to be produced in high volume on an assembly line. Currently 95% of all ICs are encapsulated in plastic. Plastic packages are robust, light weight, and suitable for automated assembly onto printed circuit boards. They have developed from low pincount (14-28 pins) dual-in-line (DIP) packages in the 1970s, to fine pitch PQFPs (plastic quad flat pack) and TQFPs (thin quad flat pack) in the 1980s-1990s, with leadcounts as high as 256. The demand for PQFPs in 1997 was estimated to be 15 billion and this figure is expected to grow to 20 billion by the year 2000.
Download or read book Practical Guide to the Packaging of Electronics written by Ali Jamnia and published by CRC Press. This book was released on 2016-12-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successfully Estimate the Thermal and Mechanical Characteristics of Electronics Systems A definitive guide for practitioners new to the field or requiring a refresher course, Practical Guide to the Packaging of Electronics: Thermal and Mechanical Design and Analysis, Third Edition provides an understanding of system failures and helps identify the areas where they can occur. Specifically designed for the mechanical, electrical, or quality engineer, the book addresses engineering issues involved in electronics packaging and provides the basics needed to design a new system or troubleshoot a current one. Updated to reflect recent developments in the field, this latest edition adds two new chapters on acoustic and reliability fundamentals, and contains more information on electrical failures and causes. It also includes tools for understanding heat transfer, shock, and vibration. Additionally, the author: Addresses various cross-discipline issues in the design of electromechanical products Provides a solid foundation for heat transfer, vibration, and life expectancy calculations Identifies reliability issues and concerns Develops the ability to conduct a more thorough analysis for the final design Includes design tips and guidelines for each aspect of electronics packaging Practical Guide to the Packaging of Electronics: Thermal and Mechanical Design and Analysis, Third Edition explains the mechanical and thermal/fluid aspects of electronic product design and offers a basic understanding of electronics packaging design issues. Defining the material in-depth, it also describes system design guidelines and identifies reliability concerns for practitioners in mechanical, – electrical or quality engineering.
Download or read book Modeling Analysis Design and Tests for Electronics Packaging beyond Moore written by Hengyun Zhang and published by Woodhead Publishing. This book was released on 2019-11-14 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, Analysis, Design and Testing for Electronics Packaging Beyond Moore provides an overview of electrical, thermal and thermomechanical modeling, analysis, design and testing for 2.5D/3D. The book addresses important topics, including electrically and thermally induced issues, such as EMI and thermal issues, which are crucial to package signal and thermal integrity. It also covers modeling methods to address thermomechanical stress related to the package structural integrity. In addition, practical design and test techniques for packages and systems are included. Includes advanced modeling and analysis methods and techniques for state-of-the art electronics packaging Features experimental characterization and qualifications for the analysis and verification of electronic packaging design Provides multiphysics modeling and analysis techniques of electronic packaging
Download or read book Mechanical Analysis of Electronic Packaging Systems written by Mckeown and published by CRC Press. This book was released on 1999-04-06 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Fills the niche between purely technical engineering texts and sophisticated engineering software guides-providing a pragmatic, common sense approach to analyzing and remedying electronic packaging configuration problems. Combines classical engineering techniques with modern computing to achieve optimum results in assessment cost and accuracy."
