Download or read book Metallurgical and Ceramic Protective Coatings written by K.H. Stern and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering is an increasingly important field and consequently those involved need to be aware of the vast range of technologies available to modify surfaces. This text provides an up-to-date, authoritative exposition of the major condensed phase methods used for producing metallurgical and ceramic coatings. Each method is discussed thoroughly by an expert in that field. In each chapter the principle of the method, its range of applications and technical aspects involved are described. The book not only informs the reader about established technologies familiar only to specialists, but also details activity on the frontier of coating technology providing an insight into those potential technologies not yet fully developed but which should emerge in the near future.
Download or read book The Science and Engineering of Thermal Spray Coatings written by Lech Pawlowski and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively updated and revised version builds on the success of the first edition featuring new discoveries in powder technology, spraying techniques, new coatings applications and testing techniques for coatings -- Many new spray techniques are considered that did not exist when the first edition was published! The book begins with coverage of materials used, pre-spray treatment, and the techniques used. It then leads into the physics and chemistry of spraying and discusses coatings build-up. Characterization methods and the properties of the applied coatings are presented, and the book concludes with a lengthy chapters on thermal spray applications covers such areas as the aeronautics and space, automobiles, ceramics, chemicals, civil engineering, decorative coatings, electronics, energy generation and transport, iron and steel, medicine, mining and the nuclear industries.
Download or read book Plasma Spray Coating written by Robert B. Heimann and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, thermal spraying of metallic, ceramic and composite coatings has emerged as a powerful tool for surface engineering, with many new applications and markets continually being developed. This book will help materials scientists and engineers to choose the most appropriate combination of materials, equipment, and operation parameters for the design of high-performance coatings with new functional properties and improved service life. Includes: * a thorough treatment of the fundamental physical processes governing plasma spray technology; * a critical assessment of advantages and disadvantages of the method compared with other suface coating techniques; * a discussion of basic equipment requirements and limitations; * case studies and typical applications to solve industrial problems. Plasma-Spray Coating offers a stimulating combination of basic concepts and practical applications. Materials scientists and engineers, as well as graduate students will find this book of enormous value.
Download or read book Future Development of Thermal Spray Coatings written by Nuria Espallargas and published by Elsevier. This book was released on 2015-06-29 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future Development of Thermal Spray Coatings discusses the latest developments and research trends in the thermal spray industry. The book presents a timely guide to new applications and techniques. After an introduction to thermal spray coatings by the editor, Part One covers new types and properties of thermal spray coatings. Chapters look at feedstock suspensions and solutions, the application of solution precursor spray techniques to obtain ceramic films and coatings, cold spray techniques and warm spray technology amongst others. Part Two of the book moves on to discuss new applications for thermal spray coatings such as the use of thermal spray coatings in environmental barrier coatings, thermal spray coatings in renewable energy applications and manufacturing engineering in thermal spray technologies by advanced robot systems and process kinematics. - Timely guide on the current advancements and research trends in thermal spray technology - Reviews different types of thermal spray coatings - Presents a wide variety of applications for this emerging technology
Download or read book Thermal Spray Ceramic Coatings written by Craig Emerson and published by . This book was released on 2009-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Spray Ceramic Coatings written by and published by . This book was released on 2008 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Spray Coatings written by Lalit Thakur and published by CRC Press. This book was released on 2021-11-22 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest information about the research being conducted and established solutions available in the field of thermal spray coatings for various engineering applications. The readers of this book will be mainly the graduates, engineers and researchers who are pursuing their carrier in the field of thermal spraying. This book will cover the studies and research works of reputed scientists and engineers who have developed thermal spray coatings for thermal protection, bio-implants, renewal energy, wear and corrosion in hydraulic turbines and jet engines, hydrophobic surfaces etc. Hence, the book serves as a valuable resource of latest advancement in thermal spray technology and consolidated references for aspirants and professionals of surface engineering community. The book covers following topics for different industrial applications: Introduction: Historical developments, Science and Engineering aspects of thermal spray coating technology and different thermal spray coatings techniques and its comparison with other fabrication processes. Recent advancements and applications of thermal spray coatings Cold spray technology for additive manufacturing. High-temperature corrosion and erosion resistant coatings and thermal barrier coatings for power plants, automotive sector, and jet engines. Erosion and corrosion-resistant coatings for hydro-power plants, offshore, chemical and oil industries. Bio-coatings for human body implants. Thermal spray coating for super-hydrophobic surface. 3. Case study of boiler tubes failure and prevention by thermal spray coatings.
Download or read book Environmental Barrier Coatings written by Kang N. Lee and published by MDPI. This book was released on 2020-12-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global increase in air travel will require commercial vehicles to be more efficient than ever before. Advanced engine hot section materials are a key technology required to keep fuel consumption and emission to a minimum in next-generation gas turbines. Ceramic matrix composites (CMCs) are the most promising material to revolutionize gas turbine hot section materials technology because of their excellent high‐temperature properties. Rapid surface recession due to volatilization by water vapor is the Achilles heel of CMCs. Environmental barrier coatings (EBCs) is an enabling technology for CMCs, since it protects CMCs from water vapor. The first CMC component entered into service in 2016 in a commercial engine, and more CMC components are scheduled to follow within the next few years. One of the most difficult challenges to CMC components is EBC durability, because failure of EBC leads to a rapid reduction in CMC component life. Key contributors to EBC failure include recession, oxidation, degradation by calcium‐aluminum‐magnesium silicates (CMAS) deposits, thermal and thermo‐mechanical strains, particle erosion, and foreign object damage (FOD). Novel EBC chemistries, creative EBC designs, and robust processes are required to meet EBC durability challenges. Engine-relevant testing, characterization, and lifing methods need to be developed to improve EBC reliability. The aim of this Special Issue is to present recent advances in EBC technology to address these issues. In particular, topics of interest include but are not limited to the following: • Novel EBC chemistries and designs; • Processing including plasma spray, suspension plasma spray, solution precursor plasma spray, slurry process, PS-PVD, EB-PVD, and CVD; • Testing, characterization, and modeling; • Lifing.
Download or read book Thermal Spray Ceramic Coatings written by CSA Journal Division and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-05-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.
Download or read book Suspension Plasma Spray Coating of Advanced Ceramics written by Navid Hosseinabadi and published by CRC Press. This book was released on 2022-09-01 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Suspension Plasma Spray Coating of Advanced Ceramics presents the significance of suspension plasma spray coating of ceramics for thermal barrier applications. It covers suspension formation and optimization in different oxide and non-oxide mixtures and ceramic matrix composites (CMC) of sub-micron and nanosized powders. Enabling readers to understand the importance of thermally inert and insulating ceramic coatings on metals and alloys, the book explains how to improve their utilization in applications, such as turbine blades or diesel engines, gas turbines, and coating methods. This book also discusses advanced topics on nanomaterials coatings in monolithic or composite forms as thermal barriers through organic and non-organic based suspensions using high energy plasma spray methods. Features: Presents significant thermal barrier properties using high energy plasma spray methods. Explores advanced surface modification techniques. Covers monolithic, composite, and solid solution ceramics coating. Discusses high precision coating methods. The book will be useful for professional engineers working in surface modification and researchers studying materials science and engineering, corrosion, and abrasion.
Download or read book Production Properties and Applications of High Temperature Coatings written by Pakseresht, Amir Hossein and published by IGI Global. This book was released on 2018-01-12 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat resistant layers are meant to withstand high temperatures while also protecting against all types of corrosion and oxidation. Therefore, the micro-structure and behavior of such layers is essential in understanding the functionality of these materials in order to make improvements. Production, Properties, and Applications of High Temperature Coatings is a critical academic publication which examines the methods of creation, characteristics, and behavior of materials used in heat resistant layers. Featuring coverage on a wide range of topics such as, thermal spray methods, sol-gel coatings, and surface nanoengineering, this book is geared toward students, academicians, engineers, and researchers seeking relevant research on the methodology and materials for producing effective heat resistant layers.
Download or read book Thermal Spray Fundamentals written by Pierre L. Fauchais and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 1587 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamentals necessary for understanding thermal spray technology. Coverage includes in-depth discussions of various thermal spray processes, feedstock materials, particle-jet interactions, and associated yet very critical topics: diagnostics, current and emerging applications, surface science, and pre and post-treatment. This book will serve as an invaluable resource as a textbook for graduate courses in the field and as an exhaustive reference for professionals involved in thermal spray technology.
Download or read book Handbook of Thermal Spray Technology written by Joseph R. Davis and published by ASM International. This book was released on 2004-01-01 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference covers principles, processes, types of coatings, applications, performance, and testing and analysis of thermal spray technology. It will serve as an introduction and guide for those new to thermal spray, and as a reference for specifiers and users of thermal spray coatings and thermal spray experts. Coverage encompasses basics of th
Download or read book Advances in Thermal Spraying written by Welding Institute of Canada and published by Pergamon. This book was released on 1986 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Ceramic Coatings and Interfaces written by Dongming Zhu and published by John Wiley & Sons. This book was released on 2009-09-29 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in coating development, processing, microstructure and property characterization, and life prediction are included in this book, which came from the proceedings of the 30th International Conference on Advanced Ceramics and Composites, January 22-27, 2006, Cocoa Beach, Florida. Organized and sponsored by The American Ceramic Society and The American Ceramic Society's Engineering Ceramics Division in conjunction with the Nuclear and Environmental Technology Division.. Integrated structural, environmental properties and functionality through advanced coating processing and structural design are emphasized in this book.
Download or read book Ceramic Coatings written by Feng Shi and published by BoD – Books on Demand. This book was released on 2012-02-24 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main target of this book is to state the latest advancement in ceramic coatings technology in various industrial fields. The book includes topics related to the applications of ceramic coating covers in enginnering, including fabrication route (electrophoretic deposition and physical deposition) and applications in turbine parts, internal combustion engine, pigment, foundry, etc.
