Download or read book Thermal Mechanical Modelling of the Flat Rolling Process written by Maciej Pietrzyk and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flat rolling is considered to be one of the most important and most widely used metal forming processes. This book emphasizes the importance of mathematical simulation of this process in the light of the ever in- creasing need for quality improvements through automation. Mathematical models of the hot, warm and cold rolling processes are discussed, compared and critically evaluated. Engineers in the steel industry will find this book particularly useful in their everyday work.
Download or read book Thermal Mechanical Modelling of the Flat Rolling Process written by Maciej Pietrzyk and published by Springer. This book was released on 2011-12-28 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flat rolling is considered to be one of the most important and most widely used metal forming processes. This book emphasizes the importance of mathematical simulation of this process in the light of the ever in- creasing need for quality improvements through automation. Mathematical models of the hot, warm and cold rolling processes are discussed, compared and critically evaluated. Engineers in the steel industry will find this book particularly useful in their everyday work.
Download or read book Primer on Flat Rolling written by John G. Lenard and published by Newnes. This book was released on 2013-12-04 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Primer on Flat Rolling is a fully revised second edition, and the outcome of over three decades of involvement with the rolling process. It is based on the author's yearly set of lectures, delivered to engineers and technologists working in the rolling metal industry. The essential and basic ideas involved in designing and analysis of the rolling process are presented. The book discusses and illustrates in detail the three components of flat rolling: the mill, the rolled metal, and their interface. New processes are also covered; flexible rolling and accumulative roll-bonding. The last chapter contains problems, with solutions that illustrate the complexities of flat rolling. New chapters include a study of hot rolling of aluminum, contributed by Prof. M. Wells; advanced applications of the finite element method, by Dr. Yuli Liu and by Dr. G. Krallics; roll design by Dr. J. B. Tiley and the history of the development of hot rolling mills, written by Mr. D. R. Adair and E. B. Intong. Engineers, technologists and students can all use this book to aid their planning and analysis of flat rolling processes. Provides clear descriptions for engineers and technologists working in steel mills Evaluates the predictive capabilities of mathematical models Assignments and their solutions are included within the text
Download or read book Mathematical and Physical Simulation of the Properties of Hot Rolled Products written by Maciej Pietrzyk and published by Elsevier. This book was released on 1999-07-05 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this publication is to comprehensively discuss the possibilities of producing steels with pre-determined attributes, demanded by the customer to fit exacting specifications. The information presented in the book has been designed to indicate the reasons for the expenses and to aid in the process of overcoming the difficulties and reducing the costs. In nine detailed chapters, the authors cover topics including: • steel as a major contributor to the economic wealth of a country in terms of its capabilities and production • current concerns of major steel producers • phenomena contributing to the quality of the product • information concerning the boundary conditions of the rolling process and initial conditions, put to use by mathematical models • the solid state incremental approach and flow formulation • parameters and variables - most of which make use of the exponential nature of phenomena that are activated by thermal energy • the application of three dimensional analysis to shape rolling • the evaluation of parameters by a form of inverse analysis to the flat rolling process • knowledge based modeling, using artificial intelligence, expert systems and neural networks They conclude that when either mathematical or physical modeling of the rolling process is considered and the aim is to satisfy the demands for customers, it is possible to produce what the customer wants, exactly.
Download or read book Transport Phenomena in Food Processing First International Conference Proceedings written by Selcuk Guceri and published by CRC Press. This book was released on 1992-11-30 with total page 1618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oxide Scale Behavior in High Temperature Metal Processing written by Michal Krzyzanowski and published by John Wiley & Sons. This book was released on 2010-03-30 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The result of a fruitful, on-going collaboration between academia and industry, this book reviews recent advances in research on oxide scale behavior in high-temperature forming processes. Presenting novel, previously neglected approaches, the authors emphasize the pivotal role of reproducible experiments to elucidate the oxide scale properties and develop quantitative models with predictive accuracy. Each chapter consists of a detailed, systematic examination of different aspects of oxide scale formation with immediate impact for researchers and developers in industry. The clear and stringent style of presentation makes this monograph both coherent and easily readable.
Download or read book Modeling Steel Deformation in the Semi Solid State written by Marcin Hojny and published by Springer. This book was released on 2017-09-07 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique approach to integrated high-temperature process modelling, intended to serve as a design aid for new metal processing technologies. The second edition has been substantially expanded to include new content such as: a new algorithm and test results of 3D stereoscopic visualization; new programming procedures for modelling; the validation of computer simulation using experimental results; a multiscale model of grain growth; a conceptual methodology developing “high-temperature” CCT (continuous cooling transformation) diagrams, and many more examples validating the numerical simulations. The models presented are applied in comprehensive tests in order to solve problems related to the high-temperature deformation of steel. The testing methods include both physical tests using specialist laboratory instruments, and advanced mathematical modelling: the Finite Element method (FE), Smoothed Particle Hydrodynamics method (SPH) and Mo nte Carlo method (MC).This approach, which integrates the fields of physical and computer-based simulations, forms the basis for the described concept of integrated high-temperature process modelling, presented in detail in this book.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1991 with total page 1380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling of Metal Forming Processes written by J.L. Chenot and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: The physical modelling of metal forming processes has been widely used both in University and in Industry for many years. Relatively simple numerical models, such as the Slab Method and the Upper Bound Method, were first used and many such models are implemented in the industry for practical design or regulation of forming processes. These are also under investigation in the University, mainly for treat models ments which require low cost calculations or very fast answers for on-line integration. More recently, sophisticated numerical methods have been used for the simulation of metal flow during forming operations. Since the early works in 1973 and 1974, mainly in U. K. and U. S. A. , the applications of the finite element method to metal processing have been developed in many laboratories all over the world. Now the numerical approach seems to be widely re cognized as a powerful tool for comprehension oriented studies, for predic ting the main technological parameters, and for the design and the optlmi zation of new forming sequences. There is also a very recent trend for the introduction of physical laws in the thermo-mechanical models, in order to predict the local evolution of internal variable representing the micro structure of the metal. To day more and more practicians of the Industry are asking for compu ter models for design of their forming processes.
Download or read book Rolling of Advanced High Strength Steels written by Jingwei Zhao and published by CRC Press. This book was released on 2017-07-12 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced high strength steels (AHSSs) for auto-making are primarily produced by rolling, plus heat treatment technologies if necessary. However, due to the metallurgical complexity of AHSSs, it is impossible to roll all of the AHSS grades in a rolling mill with the same rolling technology. Each of AHSSs has unique applications in vehicles, and specified rolling technologies are required to produce high quality AHSS products where they might be the best employed to meet performance demands of the automotive parts. Such background has prompted the publication of this scholarly book in the area of rolling of AHSSs with a purpose of providing readers with a valuable technical document that can be used in the research and development of AHSSs for automotive and other manufacturing industries. With contributors from USA, Germany, Poland, Italy, Spain, Austria, Australia, China, India and Iran, the book highlights the latest advances in rolling technologies of AHSSs. It focuses on the theory, simulation and practice of the rolling of AHSSs: The book introduces the history, types and advances of AHSSs and their processes; proposes new theory that is applicable to the rolling of AHSSs, presents mathematical and numerical modelling of AHSSs in rolling; covers thermomechanical processing technologies of AHSSs; provides case studies on the rolling practice of the most popular AHSSs and includes other rolling-related technologies of AHSSs. The book will be useful for both theoretical and applied research aimed at AHSSs rolling technologies, and will be a scientific and valuable literature for the metallurgists, engineers, materials scientists, academics and graduate students who are studying and working with AHSSs and their rolling technologies worldwide.
Download or read book Metal Forming Science and Practice written by J.G. Lenard and published by Elsevier. This book was released on 2002-10-08 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication has been written to honour the contribution to science and education made by the Distinguished Professor Emeritus Professor Schey on his eightieth birthday. The contributors to his book are among the countless researchers who have read, studied and learned from Professor Schey's work, which includes books, research monographs, invited papers, keynote papers, scientific journals and conferences. The topics include manufacturing, sheet and bulk metal forming and tribology, amongst others. The topics included in this book include: John Schey and value-added manufacturing; Surface finish and friction in cold-metal rolling; Direct observation of interface for tribology in metal forming; An examination of the coefficient of friction; Studies on micro plasto hydrodynamic lubrication in metal forming; Numerical simulation of sheet metal forming; Geometric and mechanics model of sheet forming; Modelling and optimisation of metal forming processes; The mathematical modelling of hot rolling steel; Identification of rheological and tribological parameters; Oxide behaviour in hot rolling; Friction, lubrication and surface response in wire drawing; and Modelling and control of temper rolling and skin pass rolling.
Download or read book Process Machine Interactions written by Berend Denkena and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume collects the scientific results of the DFG Priority Program 1180 Prediction and Manipulation of the Interactions between Structures and Processes. The research program has been conducted during the years 2005 and 2011, whereas the primary goal was the analysis of the interactions between processes and structures in modern production facilities. This book presents the findings of the 20 interdisciplinary subprojects, focusing on different manufacturing processes such as high performance milling, tool grinding or metal forming. It contains experimental investigations as well as mathematical modeling of production processes and machine interactions. New experimental advancements and novel simulation approaches are also included.
Download or read book 13th International Conference on Aluminum Alloys ICAA 13 written by Hasso Weiland and published by Springer. This book was released on 2017-02-28 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the 13th International Conference on Aluminum Alloys (ICAA-13), the premier global conference for exchanging emerging knowledge on the structure and properties of aluminum materials. The papers are organized around the topics of the science of aluminum alloy design for a range of market applications; the accurate prediction of material properties; novel aluminum products and processes; and emerging developments in recycling and applications using both monolithic and multi-material solutions.
Download or read book Numerical Modelling of Material Deformation Processes written by Peter Hartley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal aim of this text is to encourage the development and application of numerical modelling techniques as an aid to achieving greater efficiency and optimization of metal-forming processes. The contents of this book have therefore been carefully planned to provide both an introduction to the fundamental theory of material deformation simulation, and also a comprehensive survey of the "state-of-the-art" of deformation modelling techniques and their application to specific and industrially relevant processes. To this end, leading international figures in the field of material deformation research have been invited to contribute chapters on subjects on which they are acknowledged experts. The information in this book has been arranged in four parts: Part I deals with plasticity theory, Part II with various numerical modelling techniques, Part III with specific process applications and material phenomena and Part IV with integrated computer systems. The objective of Part I is to establish the underlying theory of material deformation on which the following chapters can build. It begins with a chapter which reviews the basic theories of classical plasticity and describes their analytical representations. The second chapter moves on to look at the theory of deforming materials and shows how these expressions may be used in numerical techniques. The last two chapters of Part I provide a review of isotropic plasticity and anisotropic plasticity.
Download or read book Handbook of Workability and Process Design written by George E. Dieter and published by ASM International. This book was released on 2003-01-01 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flat Rolling Fundamentals written by Vladimir B. Ginzburg and published by CRC Press. This book was released on 2000-06-30 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume compiles information from physics, metallurgy, and mechanical and electrical engineering to epitomize the fundamental characteristics of flat rolling steel. Flat Rolling Fundamentals is drawn from in-depth analyses of metal properties and behaviors to technologies in application. The book provides a full characterization of steel, including structure, chemical composition, classifications, physical properties, deformation, and plasticity. The authors present different types of rolling mills and the defining physical analytical parameters.They also discuss the effects of hot rolling on steel and the role of lubrication and thermomechanical treatments to minimize these effects. This book presents qualitative and quantitative advances in cost-effective steel production.
Download or read book Metals Abstracts written by and published by . This book was released on 1995 with total page 1302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
