Download or read book Thermal Management Concepts in Microelectronic Packaging written by Stephen S. Furkay and published by . This book was released on 1984 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Materials for Thermal Management of Electronic Packaging written by Xingcun Colin Tong and published by Springer Science & Business Media. This book was released on 2011-01-05 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for advanced thermal management materials in electronic packaging has been widely recognized as thermal challenges become barriers to the electronic industry’s ability to provide continued improvements in device and system performance. With increased performance requirements for smaller, more capable, and more efficient electronic power devices, systems ranging from active electronically scanned radar arrays to web servers all require components that can dissipate heat efficiently. This requires that the materials have high capability of dissipating heat and maintaining compatibility with the die and electronic packaging. In response to critical needs, there have been revolutionary advances in thermal management materials and technologies for active and passive cooling that promise integrable and cost-effective thermal management solutions. This book meets the need for a comprehensive approach to advanced thermal management in electronic packaging, with coverage of the fundamentals of heat transfer, component design guidelines, materials selection and assessment, air, liquid, and thermoelectric cooling, characterization techniques and methodology, processing and manufacturing technology, balance between cost and performance, and application niches. The final chapter presents a roadmap and future perspective on developments in advanced thermal management materials for electronic packaging.

Download or read book Thermal Management of Microelectronic Equipment written by Lian-Tuu Yeh and published by American Society of Mechanical Engineers. This book was released on 2002 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an increased demand on system reliability and performance combined with the miniaturization of devices, thermal consideration has become a crucial factor in the design of electronic packaging, from chip to system levels. This new book emphasizes the solving of practical design problems in a wide range of subjects related to various heat transfer technologies. While focusing on understanding the physics involved in the subject area, the authors have provided substantial practical design data and empirical correlations used in the analysis and design of equipment. The book provides the fundamentals along with a step-by-step analysis approach to engineering, making it an indispensable reference volume. The authors present a comprehensive convective heat transfer catalog that includes correlations of heat transfer for various physical configurations and thermal boundary conditions. They also provide property tables of solids and fluids. Lian-Tuu Yeh and Richard Chu are recognized experts in the field of thermal management of electronic systems and have a combined 60 years of experience in the defense and commercial industries.

Download or read book Cooling of Microelectronic and Nanoelectronic Equipment written by Madhusudan Iyengar and published by World Scientific. This book was released on 2014-08-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: To celebrate Professor Avi Bar-Cohen's 65th birthday, this unique volume is a collection of recent advances and emerging research from various luminaries and experts in the field. Cutting-edge technologies and research related to thermal management and thermal packaging of micro- and nanoelectronics are covered, including enhanced heat transfer, heat sinks, liquid cooling, phase change materials, synthetic jets, computational heat transfer, electronics reliability, 3D packaging, thermoelectrics, data centers, and solid state lighting. This book can be used by researchers and practitioners of thermal engineering to gain insight into next generation thermal packaging solutions. It is an excellent reference text for graduate-level courses in heat transfer and electronics packaging. Contents:A Review of Cooling Road Maps for 3D Chip Packages (Dereje Agonafer)Thermal Performance Mapping of Direct Liquid Cooled 3D Chip Stacks (Karl J L Geisler and Avram Bar-Cohen)Dynamic Thermal Management Considering Accurate Temperature-Leakage Interdependency (Bing Shi and Ankur Srivastava)Energy Reduction and Performance Maximization Through Improved Cooling (David Copeland)Optimal Choice of Heat Sinks from an Industrial Point of View (Clemens J M Lasance)Synthetic Jets for Heat Transfer Augmentation in Microelectronics Systems (Mehmet Arik and Enes Tamdogan)Recent Advance in Thermoelectric Devices for Electronics Cooling (Peng Wang)Energy Efficient Solid-State Cooling for Hot Spot Removal (Kazuaki Yazawa, Andrei Fedorov, Yogendra Joshi and Ali Shakouri)An Overview of the Use of Phase Change Materials for the Thermal Management of Transient Portable Electronics: Benefits and Challenges (Amy S Fleischer)Estimation of Cooling Performance of Phase Change Material (PCM) Module (Masaru Ishizuka and Tomoyuki Hatakeyama)Optimization Under Uncertainty for Electronics Cooling Design (Karthik K Bodla, Jayathi Y Murthy and Suresh V Garimella)Hydrophilic CNT-Sintered Copper Composite Wick for Enhanced Cooling (Glen A Powell, Anuradha Bulusu, Justin A Weibel, Sungwon S Kim, Suresh V Garimella and Timothy S Fisher)A Cabinet Level Thermal Test Vehicle to Evaluate Hybrid Double-Sided Cooling Schemes (Qihong Nie and Yogendra Joshi)Energy Efficiency and Reliability Risk Mitigation of Data Centers Through Prognostics and Health Management (Jun Dai, Michael Ohadi and Michael Pecht)Damage Pre-Cursors Based Assessment of Accrued Thermomechanical Damage and Remaining Useful Life in Field Deployed Electronics (Pradeep Lall, Mahendra Harsha, Kai Goebel and Jim Jones)Towards Embedded Cooling — Gen 3 Thermal Packaging Technology (Avram Bar-Cohen) Readership: Researchers, practitioners, and postgraduates in mechanical engineering, nanoelectronics, computer engineering, and electrical & electronic engineering. Keywords:Electronics Cooling;Electronics Packaging;Thermal Management;Thermal Sciences;Electronics Reliability;Thermoelectrics;Computational Heat Transfer;Liquid Cooling

Download or read book Advanced Materials for Thermal Management of Electronic Packaging written by Xingcun Colin Tong Ph.D and published by Springer. This book was released on 2011-07-21 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for advanced thermal management materials in electronic packaging has been widely recognized as thermal challenges become barriers to the electronic industry’s ability to provide continued improvements in device and system performance. With increased performance requirements for smaller, more capable, and more efficient electronic power devices, systems ranging from active electronically scanned radar arrays to web servers all require components that can dissipate heat efficiently. This requires that the materials have high capability of dissipating heat and maintaining compatibility with the die and electronic packaging. In response to critical needs, there have been revolutionary advances in thermal management materials and technologies for active and passive cooling that promise integrable and cost-effective thermal management solutions. This book meets the need for a comprehensive approach to advanced thermal management in electronic packaging, with coverage of the fundamentals of heat transfer, component design guidelines, materials selection and assessment, air, liquid, and thermoelectric cooling, characterization techniques and methodology, processing and manufacturing technology, balance between cost and performance, and application niches. The final chapter presents a roadmap and future perspective on developments in advanced thermal management materials for electronic packaging.

Download or read book The Electronics Handbook written by Jerry C. Whitaker and published by CRC Press. This book was released on 2018-10-03 with total page 2640 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the ten years since the appearance of the groundbreaking, bestselling first edition of The Electronics Handbook, the field has grown and changed tremendously. With a focus on fundamental theory and practical applications, the first edition guided novice and veteran engineers along the cutting edge in the design, production, installation, operation, and maintenance of electronic devices and systems. Completely updated and expanded to reflect recent advances, this second edition continues the tradition. The Electronics Handbook, Second Edition provides a comprehensive reference to the key concepts, models, and equations necessary to analyze, design, and predict the behavior of complex electrical devices, circuits, instruments, and systems. With 23 sections that encompass the entire electronics field, from classical devices and circuits to emerging technologies and applications, The Electronics Handbook, Second Edition not only covers the engineering aspects, but also includes sections on reliability, safety, and engineering management. The book features an individual table of contents at the beginning of each chapter, which enables engineers from industry, government, and academia to navigate easily to the vital information they need. This is truly the most comprehensive, easy-to-use reference on electronics available.

Download or read book Advanced Thermal Management Materials written by Guosheng Jiang and published by Springer Science & Business Media. This book was released on 2012-09-13 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Thermal Management Materials provides a comprehensive and hands-on treatise on the importance of thermal packaging in high performance systems. These systems, ranging from active electronically-scanned radar arrays to web servers, require components that can dissipate heat efficiently. This requires materials capable of dissipating heat and maintaining compatibility with the packaging and dye. Coverage includes all aspects of thermal management materials, both traditional and non-traditional,with an emphasis on metal based materials. An in-depth discussion of properties and manufacturing processes, and current applications are provided. Also presented are a discussion of the importance of cost, performance and reliability issues when making implementation decisions, product life cycle developments, lessons learned and future directions.

Download or read book Electronic Systems Maintenance Handbook written by Jerry C. Whitaker and published by CRC Press. This book was released on 2017-12-19 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: The days of troubleshooting a piece of gear armed only with a scope, voltmeter, and a general idea of how the hardware works are gone forever. As technology continues to drive equipment design forward, maintenance difficulties will continue to increase, and those responsible for maintaining this equipment will continue to struggle to keep up. The Electronic Systems Maintenance Handbook, Second Edition establishes a foundation for servicing, operating, and optimizing audio, video, computer, and RF systems. Beginning with an overview of reliability principles and properties, a team of top experts describes the steps essential to ensuring high reliability and minimum downtime. They examine heat management issues, grounding systems, and all aspects of system test and measurement. They even explore disaster planning and provide guidelines for keeping a facility running under extreme circumstances. Today more than ever, the reliability of a system can have a direct and immediate impact on the profitability of an operation. Advocating a carefully planned, systematic maintenance program, the richly illustrated Electronic Systems Maintenance Handbook helps engineers and technicians meet the challenges inherent in modern electronic equipment and ensure top quality performance from each piece of hardware.

Download or read book Microelectronics Packaging Handbook written by R.R. Tummala and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronics has become the largest industry, surpassing agriCUlture, auto. and heavy metal industries. It has become the industry of choice for a country to prosper, already having given rise to the phenomenal prosperity of Japan. Korea. Singapore. Hong Kong. and Ireland among others. At the current growth rate, total worldwide semiconductor sales will reach $300B by the year 2000. The key electronic technologies responsible for the growth of the industry include semiconductors. the packaging of semiconductors for systems use in auto, telecom, computer, consumer, aerospace, and medical industries. displays. magnetic, and optical storage as well as software and system technologies. There has been a paradigm shift, however, in these technologies. from mainframe and supercomputer applications at any cost. to consumer applications at approximately one-tenth the cost and size. Personal computers are a good example. going from $500IMIP when products were first introduced in 1981, to a projected $lIMIP within 10 years. Thin. light portable. user friendly and very low-cost are. therefore. the attributes of tomorrow's computing and communications systems. Electronic packaging is defined as interconnection. powering, cool ing, and protecting semiconductor chips for reliable systems. It is a key enabling technology achieving the requirements for reducing the size and cost at the system and product level.

Download or read book Heat Transfer Equipment Design written by R. K. Shah and published by CRC Press. This book was released on 1988-07-01 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Encyclopedia Of Thermal Packaging Set 3 Thermal Packaging Applications A 3 volume Set written by Bar-cohen Avram and published by World Scientific. This book was released on 2018-10-15 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal and mechanical packaging — the enabling technologies for the physical implementation of electronic systems — are responsible for much of the progress in miniaturization, reliability, and functional density achieved by electronic, microelectronic, and nanoelectronic products during the past 50 years. The inherent inefficiency of electronic devices and their sensitivity to heat have placed thermal packaging on the critical path of nearly every product development effort in traditional, as well as emerging, electronic product categories.Successful thermal packaging is the key differentiator in electronic products, as diverse as supercomputers and cell phones, and continues to be of pivotal importance in the refinement of traditional products and in the development of products for new applications. The Encyclopedia of Thermal Packaging, compiled in four multi-volume sets (Set 1: Thermal Packaging Techniques, Set 2: Thermal Packaging Tools, Set 3: Thermal Packaging Applications, and Set 4: Thermal Packaging Configurations) provides a comprehensive, one-stop treatment of the techniques, tools, applications, and configurations of electronic thermal packaging. Each of the author-written volumes presents the accumulated wisdom and shared perspectives of a few luminaries in the thermal management of electronics.The four sets in the Encyclopedia of Thermal Packaging will provide the novice and student with a complete reference for a quick ascent on the thermal packaging 'learning curve,' the practitioner with a validated set of techniques and tools to face every challenge, and researchers with a clear definition of the state-of-the-art and emerging needs to guide their future efforts. This encyclopedia will, thus, be of great interest to packaging engineers, electronic product development engineers, and product managers, as well as to researchers in thermal management of electronic and photonic components and systems, and most beneficial to undergraduate and graduate students studying mechanical, electrical, and electronic engineering.Set 3: Thermal Packaging ApplicationsThe third set in the Encyclopedia includes two volumes in the planned focus on Thermal Packaging Applications and a single volume on the use of Phase Change Materials (PCM), a most important Thermal Management Technique, not previously addressed in the Encyclopedia. Set 3 opens with Heat Transfer in Avionic Equipment, authored by Dr Boris Abramzon, offering a comprehensive, in-depth treatment of compact heat exchangers and cold plates for avionics cooling, as well as discussion on recent developments in these heat transfer units that are widely used in the thermal control of military and civilian airborne electronics. Along with a detailed presentation of the relevant thermofluid physics and governing equations, and the supporting mathematical design and optimization techniques, the book offers a practical guide for thermal engineers designing avionics cooling equipment, based on the author's 20+ years of experience as a thermal analyst and a practical design engineer for Avionics and related systems.The Set continues with Thermal Management of RF Systems, which addresses sequentially the history, present practice, and future thermal management strategies for electronically-steered RF systems, in the context of the RF operational requirements, as well as device-, module-, and system-level electronic, thermal, and mechanical considerations. This unique text was written by 3 authors, Dr John D Albrecht, Mr David H Altman, Dr Joseph J Maurer, with extensive US Department of Defense and aerospace industry experience in the design, development, and fielding of RF systems. Their combined efforts have resulted in a text, which is well-grounded in the relevant past, present, and future RF systems and technologies. Thus, this volume will provide the designers of advanced radars and other electronic RF systems with the tools and the knowledge to address the thermal management challenges of today's technologies, as well as of advanced technologies, such as wide bandgap semiconductors, heterogeneously integrated devices, and 3D chipsets and stacks.The third volume in Set 3, Phase Change Materials for Thermal Management of Electronic Components, co-authored by Prof Gennady Ziskind and Dr Yoram Kozak, provides a detailed description of the numerical methods used in PCM analysis and a detailed explanation of the processes that accompany and characterize solid-liquid phase-change in popular basic and advanced geometries. These provide a foundation for an in-depth exploration of specific electronics thermal management applications of Phase Change Materials. This volume is anchored in the unique PCM knowledge and experience of the senior author and placed in the context of the extensive solid-liquid phase-change literature in such diverse fields as material science, mathematical modeling, experimental and numerical methods, and thermofluid science and engineering.

Download or read book Encyclopedia of Thermal Packaging Set 1 Thermal Packaging Techniques a 6 Volume Set written by Avram Bar-Cohen and published by World Scientific. This book was released on 2012-02-01 with total page 1582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packaging, the physical design and implementation of electronic systems is responsible for much of the progress in miniaturization, reliability and functional density achieved by the full range of electronic, microelectronic and nanoelectronic products during the past several decades. The inherent inefficiency of electronic devices and their sensitivity to heat have placed thermal management on the critical path of nearly every organization dealing with traditional electronic product development, as well as emerging, product categories. Successful thermal packaging is the key differentiator in electronic products, as diverse as supercomputers and cell phones, and continues to be of critical importance in the refinement of traditional products and in the development of products for new applications.The Encyclopedia of Thermal Packaging, compiled into four 5-volume sets (Thermal Packaging Techniques, Thermal Packaging Configurations, Thermal Packaging Tools and Thermal Packaging Applications), will provide comprehensive, one-stop treatment of the techniques, configurations, tools and applications of electronic thermal packaging. Each volume in a set comprises 250–350 pages and is written by world experts in thermal management of electronics.

Download or read book Encyclopedia Of Thermal Packaging Set 2 Thermal Packaging Tools A 4 volume Set written by and published by World Scientific. This book was released on 2014-10-23 with total page 1396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Please click here for information on Set 1: Thermal Packaging Techniques Thermal and mechanical packaging -- the enabling technologies for the physical implementation of electronic systems -- are responsible for much of the progress in miniaturization, reliability, and functional density achieved by electronic, microelectronic, and nanoelectronic products during the past 50 years. The inherent inefficiency of electronic devices and their sensitivity to heat have placed thermal packaging on the critical path of nearly every product development effort in traditional, as well as emerging, electronic product categories. Successful thermal packaging is the key differentiator in electronic products, as diverse as supercomputers and cell phones, and continues to be of pivotal importance in the refinement of traditional products and in the development of products for new applications. The Encyclopedia of Thermal Packaging, compiled in four multi-volume sets (Set 1: Thermal Packaging Techniques, Set 2: Thermal Packaging Tools, Set 3: Thermal Packaging Applications, and Set 4: Thermal Packaging Configurations) will provide a comprehensive, one-stop treatment of the techniques, tools, applications, and configurations of electronic thermal packaging. Each of the author-written sets presents the accumulated wisdom and shared perspectives of a few luminaries in the thermal management of electronics. Set 2: Thermal Packaging Tools The second set in the encyclopedia, Thermal Packaging Tools, includes volumes dedicated to thermal design of data centers, techniques and models for the design and optimization of heat sinks, the development and use of reduced-order “compact” thermal models of electronic components, a database of critical material thermal properties, and a comprehensive exploration of thermally-informed electronic design. The numerical and analytical techniques described in these volumes are among the primary tools used by thermal packaging practitioners and researchers to accelerate product and system development and achieve “correct by design” thermal packaging solutions. The four sets in the Encyclopedia of Thermal Packaging will provide the novice and student with a complete reference for a quick ascent on the thermal packaging "learning curve," the practitioner with a validated set of techniques and tools to face every challenge, and researchers with a clear definition of the state-of-the-art and emerging needs to guide their future efforts. This encyclopedia will, thus, be of great interest to packaging engineers, electronic product development engineers, and product managers, as well as to researchers in thermal management of electronic and photonic components and systems, and most beneficial to undergraduate and graduate students studying mechanical, electrical, and electronic engineering. Foreword Foreword (English) (42 KB) Foreword (Japanese) (342 KB) Please click here for information on Set 1: Thermal Packaging Techniques Thermal and mechanical packaging -- the enabling technologies for the physical implementation of electronic systems -- are responsible for much of the progress in miniaturization, reliability, and functional density achieved by electronic, microelectronic, and nanoelectronic products during the past 50 years. The inherent inefficiency of electronic devices and their sensitivity to heat have placed thermal packaging on the critical path of nearly e

Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 1990-03-08 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer

Download or read book Cooling of Electronic Systems written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic technology is developing rapidly and, with it, the problems associated with the cooling of microelectronic equipment are becoming increasingly complex. So much so that it is necessary for experts in the fluid and thermal sciences to become involved with the cooling problem. Such thoughts as these led to an approach to leading specialists with a request to contribute to the present book. Cooling of Electronic Systems presents the technical progress achieved in the fundamentals of the thermal management of electronic systems and thermal strategies for the design of microelectronic equipment. The book starts with an introduction to the cooling of electronic systems, involving such topics as trends in computer system cooling, the cooling of high performance computers, thermal design of microelectronic components, natural and forced convection cooling, cooling by impinging air and liquid jets, thermal control systems for high speed computers, together with a detailed review of advances in manufacturing and assembly technology. Following this, practical methods for the determination of the parameters required for the thermal analysis of electronic systems and the accurate prediction of temperature in consumer electronics. Cooling of Electronic Systems is currently the most up-to-date book on the thermal management of electronic and microelectronic equipment, and the subject is presented by eminent scientists and experts in the field. Vital reading for all designers of modern, high-speed computers.

Download or read book Influence of Temperature on Microelectronics and System Reliability written by Pradeep Lall and published by CRC Press. This book was released on 2020-07-09 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book raises the level of understanding of thermal design criteria. It provides the design team with sufficient knowledge to help them evaluate device architecture trade-offs and the effects of operating temperatures. The author provides readers a sound scientific basis for system operation at realistic steady state temperatures without reliability penalties. Higher temperature performance than is commonly recommended is shown to be cost effective in production for life cycle costs. The microelectronic package considered in the book is assumed to consist of a semiconductor device with first-level interconnects that may be wirebonds, flip-chip, or tape automated bonds; die attach; substrate; substrate attach; case; lid; lid seal; and lead seal. The temperature effects on electrical parameters of both bipolar and MOSFET devices are discussed, and models quantifying the temperature effects on package elements are identified. Temperature-related models have been used to derive derating criteria for determining the maximum and minimum allowable temperature stresses for a given microelectronic package architecture. The first chapter outlines problems with some of the current modeling strategies. The next two chapters present microelectronic device failure mechanisms in terms of their dependence on steady state temperature, temperature cycle, temperature gradient, and rate of change of temperature at the chip and package level. Physics-of-failure based models used to characterize these failure mechanisms are identified and the variabilities in temperature dependence of each of the failure mechanisms are characterized. Chapters 4 and 5 describe the effects of temperature on the performance characteristics of MOS and bipolar devices. Chapter 6 discusses using high-temperature stress screens, including burn-in, for high-reliability applications. The burn-in conditions used by some manufacturers are examined and a physics-of-failure approach is described. The

Download or read book Thermal Stress and Strain in Microelectronics Packaging written by John Lau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectronics packaging and interconnection have experienced exciting growth stimulated by the recognition that systems, not just silicon, provide the solution to evolving applications. In order to have a high density/ performance/yield/quality/reliability, low cost, and light weight system, a more precise understanding of the system behavior is required. Mechanical and thermal phenomena are among the least understood and most complex of the many phenomena encountered in microelectronics packaging systems and are found on the critical path of neatly every design and process in the electronics industry. The last decade has witnessed an explosive growth in the research and development efforts devoted to determining the mechanical and thermal behaviors of microelectronics packaging. With the advance of very large scale integration technologies, thousands to tens of thousands of devices can be fabricated on a silicon chip. At the same time, demands to further reduce packaging signal delay and increase packaging density between communicat ing circuits have led to the use of very high power dissipation single-chip modules and multi-chip modules. The result of these developments has been a rapid growth in module level heat flux within the personal, workstation, midrange, mainframe, and super computers. Thus, thermal (temperature, stress, and strain) management is vital for microelectronics packaging designs and analyses. How to determine the temperature distribution in the elec tronics components and systems is outside the scope of this book, which focuses on the determination of stress and strain distributions in the electronics packaging.