Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2019-08-28 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new sixth edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy-saving building components.
Download or read book Materials for Energy Efficiency and Thermal Comfort in Buildings written by Matthew R Hall and published by Elsevier. This book was released on 2010-04-21 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost half of the total energy produced in the developed world is inefficiently used to heat, cool, ventilate and control humidity in buildings, to meet the increasingly high thermal comfort levels demanded by occupants. The utilisation of advanced materials and passive technologies in buildings would substantially reduce the energy demand and improve the environmental impact and carbon footprint of building stock worldwide.Materials for energy efficiency and thermal comfort in buildings critically reviews the advanced building materials applicable for improving the built environment. Part one reviews both fundamental building physics and occupant comfort in buildings, from heat and mass transport, hygrothermal behaviour, and ventilation, on to thermal comfort and health and safety requirements.Part two details the development of advanced materials and sustainable technologies for application in buildings, beginning with a review of lifecycle assessment and environmental profiling of materials. The section moves on to review thermal insulation materials, materials for heat and moisture control, and heat energy storage and passive cooling technologies. Part two concludes with coverage of modern methods of construction, roofing design and technology, and benchmarking of façades for optimised building thermal performance.Finally, Part three reviews the application of advanced materials, design and technologies in a range of existing and new building types, including domestic, commercial and high-performance buildings, and buildings in hot and tropical climates.This book is of particular use to, mechanical, electrical and HVAC engineers, architects and low-energy building practitioners worldwide, as well as to academics and researchers in the fields of building physics, civil and building engineering, and materials science. - Explores improving energy efficiency and thermal comfort through material selection and sustainable technologies - Documents the development of advanced materials and sustainable technologies for applications in building design and construction - Examines fundamental building physics and occupant comfort in buildings featuring heat and mass transport, hygrothermal behaviour and ventilation
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2014-08-21 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy saving building components.
Download or read book Construction Technology written by Eric Fleming and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new textbook provides a comprehensive introduction to everyaspect of the technology of low-rise construction. It includessub-structure (site work, setting out and foundations) andsuperstructure (flooring, roofs, finishes, fittings and fixtures).The material here covers the first year course requirement of allcourses on which construction technology is taught - no matter whatthe ultimate qualification. It offers tried and tested solutions to a range of constructionproblems and is organised following the sequence of construction.It will show what has been done in the past, demonstrating goodpractice - what works and what doesn't - and common faults. Thereare summaries of the more important BSI documents and reference tothe latest building regulations. Lengthy explanations are avoided by relying heavily on hundreds ofillustrations, pairing detail drawings with clear photographs toshow real life construction situations. The supporting spreadsheet referred to in the book can be found atthis linkhttp://www.blackwellpublishing.com/pdf/fleming/Fleming_spreadsheet.xls
Download or read book Handbook of Building Materials for Fire Protection written by Charles A. Harper and published by McGraw Hill Professional. This book was released on 2003-09-20 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first handbook devoted to the coverage of materials in the field of fire engineering. Fire Protection Building Materials Handbook walks you through the challenging maze of choosing form the hundreds of commercially available materials used in buildings today and tells you which burn and /or are weakened during exposure to fire. It is the burning characteristics of materials, which usually allow fires to begin and propagate, and the degradation of materials that cause the most damage. Providing expert guidance every step of the way, Fire Protection Building Materials Handbook helps the architect, designers and fire protection engineers to design and maintain safer buildings while complying with international codes.
Download or read book Industrial Minerals and Their Uses written by Peter A. Ciullo and published by William Andrew. This book was released on 1996-12-31 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-authored handbook is a unique cross-industry resource for formulators and compounders, and an invaluable reference for the producers of formulated commodities and industrial minerals. Monographs on each of the common functional industrial mineralsùasbestos, barite, calcium carbonate, diatomite, feldspar, gypsum, hormite, kaolin, mica, nepheline syenite, perlite, pyrophyllite, silica, smectite, talc, vermiculite, wollastonite, and zeoliteùinclude an overview of natural and commercial varieties, market size, and application areas. These are supported by descriptions of mineral structures and the wedding of minerals and chemicals through mineral surface modification. This orientation to the minerals and their uses forms the foundation for chapters where they are presented in the context of the overall technology of various consuming industries. Each of these industry-specific presentations covers both the chemical and mineral raw materials used by the formulator, how these are combined, and relevant test methods. These chapters serve a dual purpose. Each clarifies for technologists the function and value of the mineral constituents of their products. Equally important, they provide a primer on the technology of industries other than their own, so that raw material, formulation, processing and testing considerations can be compared and contrasted.The book concludes with a formulary demonstrating how specific mineral and chemical ingredients are actually compounded in major application areas, and technical data on scores of commercial mineral products.
Download or read book Building Science written by Jens Pohl and published by John Wiley & Sons. This book was released on 2011-02-21 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the improved efficiency of heating, cooling and lighting in buildings crucial to the low carbon targets of all current governments, Building Science: Concepts and Applications provides a timely and much-needed addition to the existing literature on architectural and environmental design education. Taking a logical and didactic approach, the author introduces the reader to the underlying concepts and principles of the thermal, lighting, and acoustic determinants of building design in four integrated sections. The first section explores the thermal building environment and the principles of thermal comfort, translating these principles into conceptual building design solutions. The author examines the heat flow characteristics of the building envelope and explains steady state design methods that form the basis of most building codes. He discusses the sun as a natural heat source and describes the principles of active and passive solar building design solutions. The second section introduces the scientific principles of light, color, and vision, stressing the importance of daylight in building design, presenting the Daylight Factor design concept and methodology, and discussing glare conditions and their avoidance. It also addresses artificial lighting, delving into the prominent role that electricity plays in the production of light by artificial means and comparing the efficacy and characteristics of the various commercially available light sources in terms of the energy to light conversion ratio, life span, available intensity range, color rendition properties, and cost. The third section deals with the various aspects of sound that impact the design of the built environment, discussing the nature of sound as a physical force that sets any medium through which it travels into vibration and laying the foundations for the treatment of sound as an important means of communication as well as a disruptive disturbance. The final section discusses the foundational concepts of ecological design as a basis for addressing sustainability issues in building design solutions. These issues include the embedded energy of construction materials, waste management, preservation of freshwater and management of graywater, adoption of passive solar principles, energy saving measures applicable to mechanical building services, and the end-of-lifecycle deconstruction and recycling of building materials and components. Covers the fundamental building science topics of heat, energy, light and sound Takes a logical and didactic approach, tracing the historical roots of building science Includes summaries of new technologies in solar energy and photovoltaic systems Features a section on the principles of sustainable architecture Website with answers to MC questions testing students' learning
Download or read book RSMeans Illustrated Construction Dictionary written by RSMeans and published by John Wiley & Sons. This book was released on 2012-10-05 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise student edition of the most widely used dictionary for construction and design professionals offers clear explanations of essential construction-related terms and concepts. Illustrated throughout with explanatory drawings and photographs, it is an indispensable reference for beginning and advanced students in construction, architecture, design, facility management, real estate, and other related fields. Features include: Easy-to-understand definitions of nearly 10,000 terms, phrases, and abbreviations from every area of construction More than 1,400 drawings and photographs that help clarify concepts Up-to-date coverage of new industry trends, including building automation, energy conservation, green building, historic preservation, and more An extensive reference section with plan symbols, conversions and equivalents, and more
Download or read book Introduction to Architectural Science written by Steven V. Szokolay and published by Routledge. This book was released on 2014-04-11 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, this book provides the ideal and only reference to the physical basis of architectural design. Fully updated and expanded throughout, the book provides the data required for architects to design buildings that will maintain the users comfort in a variety of conditions, with minimal reliance on energy intensive methods like air conditioning. This is not a ‘how to’ book but answers the question why. It equips the reader with the tools to realize the full potential of the good intentions of sustainable, bioclimatic design. All sections have been revised and updated for this third edition including all the most relevant developments affecting heat, light and sound controls. The book responds to the need of understanding beyond ‘rules of thumb’.
Download or read book Systems in Timber Engineering written by Josef Kolb and published by Springer Science & Business Media. This book was released on 2008-04-23 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable standard work for everyone involved in building with wood. This work uses plans, schematic drawings, and pictures to show the current and forward-looking state of the technology as applied in Switzerland, a leading country in the field of timber construction.
Download or read book Construction Management and Design of Industrial Concrete and Steel Structures written by Mohamed A. El-Reedy and published by CRC Press. This book was released on 2010-09-29 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent worldwide boom in industrial construction and the corresponding billions of dollars spent every year in industrial, oil, gas, and petrochemical and power generation project, has created fierce competition for these projects. Strong management and technical competence will bring your projects in on time and on budget. An in-depth explorat
Download or read book Civil Engineer s Reference Book written by L S Blake and published by CRC Press. This book was released on 1994-03-21 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt: After an examination of fundamental theories as applied to civil engineering, authoritative coverage is included on design practice for certain materials and specific structures and applications. A particular feature is the incorporation of chapters on construction and site practice, including contract management and control.
Download or read book Polymer Nanocomposites written by Aravind Dasari and published by Springer. This book was released on 2016-06-28 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highlights ongoing research efforts on different aspects of polymer nanocomposites and explores their potentials to exhibit multi-functional properties. In this context, it addresses both fundamental and advanced concepts, while delineating the parameters and mechanisms responsible for these potentials. Aspects considered include embrittlement/toughness; wear/scratch behaviour; thermal stability and flame retardancy; barrier, electrical and thermal conductivity; and optical and magnetic properties. Further, the book was written as a coherent unit rather than a collection of chapters on different topics. As such, the results, analyses and discussions presented herein provide a guide for the development of a new class of multi-functional nanocomposites. Offering an invaluable resource for materials researchers and postgraduate students in the polymer composites field, they will also greatly benefit materials
Download or read book Nanoclay Reinforced Polymer Composites written by Mohammad Jawaid and published by Springer. This book was released on 2016-08-12 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two-volume book series that exhaustively reviews the key recent research into nanoclay reinforced polymer composites. This second volume focuses on nanoclay based nanocomposites and bionanocomposites fabrication, characterization and applications. This includes classification of nanoclay, chemical modification and processing techniques of nanocomposites. The book also provides comprehensive information about nanoclay modification and functionalization; modification of nanoclay systems, geological and mineralogical research on clays suitability; bio-nanocomposites based on nanoclays; modelling of mechanical behaviour of halloysite based composites; mechanical and thermal properties of halloysite nanocomposites; the effect of Nanoclays on gas barrier properties of polymers and modified nanocomposites. This book is a valuable reference guide for academics and industrial practitioners alike.
Download or read book HVAC written by Ali Vedavarz and published by Industrial Press Inc.. This book was released on 2007 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive handbook and essential reference, providing instant access to all the data, calculations, and equations needed for modern HVAC design.
Download or read book Elements of Industrial Hazards written by Ratan Raj Tatiya and published by CRC Press. This book was released on 2010-12-01 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory course on Health, Safety and Environment (HSE) as applicable to all manufacturing and exploration engineering industries. Its first part deals with fundamentals, ecology and environmental engineering and covers air and water pollution sources, magnitude, measuring techniques and remedial measures to minimize them. The second pa
Download or read book Electro Fenton Process written by Minghua Zhou and published by Springer. This book was released on 2017-11-25 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the theoretical fundamentals and potential applications of the original electro-Fenton (EF) process and its most innovative and promising versions, all of which are classified as electrochemical advanced oxidation processes. It consists of 15 chapters that review the latest advances and trends, material selection, reaction and reactor modeling and EF scale-up. It particularly focuses on the applications of EF process in the treatment of toxic and persistent organic pollutants in water and soil, showing highly efficient removal for both lab-scale and pre-pilot setups. Indeed, the EF technology is now mature enough to be brought to market, and this collection of contributions from leading experts in the field constitutes a timely milestone for scientists and engineers.
