Download or read book Thermal Hydraulic Analysis of a Passive Energy Removal System for Advanced Nuclear Reactors written by José Guilherme Silva Menezes Senna and published by . This book was released on 1985 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Hydraulics of Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Woodhead Publishing. This book was released on 2017-05-18 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Hydraulics of Water-Cooled Nuclear Reactors reviews flow and heat transfer phenomena in nuclear systems and examines the critical contribution of this analysis to nuclear technology development. With a strong focus on system thermal hydraulics (SYS TH), the book provides a detailed, yet approachable, presentation of current approaches to reactor thermal hydraulic analysis, also considering the importance of this discipline for the design and operation of safe and efficient water-cooled and moderated reactors. Part One presents the background to nuclear thermal hydraulics, starting with a historical perspective, defining key terms, and considering thermal hydraulics requirements in nuclear technology. Part Two addresses the principles of thermodynamics and relevant target phenomena in nuclear systems. Next, the book focuses on nuclear thermal hydraulics modeling, covering the key areas of heat transfer and pressure drops, then moving on to an introduction to SYS TH and computational fluid dynamics codes. The final part of the book reviews the application of thermal hydraulics in nuclear technology, with chapters on V&V and uncertainty in SYS TH codes, the BEPU approach, and applications to new reactor design, plant lifetime extension, and accident analysis. This book is a valuable resource for academics, graduate students, and professionals studying the thermal hydraulic analysis of nuclear power plants and using SYS TH to demonstrate their safety and acceptability. - Contains a systematic and comprehensive review of current approaches to the thermal-hydraulic analysis of water-cooled and moderated nuclear reactors - Clearly presents the relationship between system level (top-down analysis) and component level phenomenology (bottom-up analysis) - Provides a strong focus on nuclear system thermal hydraulic (SYS TH) codes - Presents detailed coverage of the applications of thermal-hydraulics to demonstrate the safety and acceptability of nuclear power plants
Download or read book Thermal Hydraulics Aspects of Liquid Metal Cooled Nuclear Reactors written by Ferry Roelofs and published by Woodhead Publishing. This book was released on 2018-11-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Hydraulics Aspects of Liquid Metal cooled Nuclear Reactors is a comprehensive collection of liquid metal thermal hydraulics research and development for nuclear liquid metal reactor applications. A deliverable of the SESAME H2020 project, this book is written by top European experts who discuss topics of note that are supplemented by an international contribution from U.S. partners within the framework of the NEAMS program under the U.S. DOE. This book is a convenient source for students, professionals and academics interested in liquid metal thermal hydraulics in nuclear applications. In addition, it will also help newcomers become familiar with current techniques and knowledge. - Presents the latest information on one of the deliverables of the SESAME H2020 project - Provides an overview on the design and history of liquid metal cooled fast reactors worldwide - Describes the challenges in thermal hydraulics related to the design and safety analysis of liquid metal cooled fast reactors - Includes the codes, methods, correlations, guidelines and limitations for liquid metal fast reactor thermal hydraulic simulations clearly - Discusses state-of-the-art, multi-scale techniques for liquid metal fast reactor thermal hydraulics applications
Download or read book Handbook on Thermal Hydraulics in Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Elsevier. This book was released on 2024-07-29 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook on Thermal Hydraulics of Water-Cooled Nuclear Reactors, Volume 3, Procedures and Applications includes all new chapters which delve deeper into the topic, adding context and practical examples to help readers apply learnings to their own setting. Topics covered include experimental thermal-hydraulics and instrumentation, numerics, scaling and containment in thermal-hydraulics, as well as a title dedicated to good practices in verification and validation. This book will be a valuable reference for graduate and undergraduate students of nuclear or thermal engineering, as well as researchers in nuclear thermal-hydraulics and reactor technology, engineers working in simulation and modeling of nuclear reactors, and more. In addition, nuclear operators, code developers and safety engineers will also benefit from the practical guidance provided. - Presents a comprehensive analysis on the connection between nuclear power and thermal hydraulics - Includes end-of-chapter questions, quizzes and exercises to confirm understanding and provides solutions in an appendix - Covers applicable nuclear reactor safety considerations and design technology throughout
Download or read book Characterization of the Advanced Plant Experiment APEX Passive Residual Heat Removal System Heat Exchanger written by Owen L. Stevens and published by . This book was released on 1996 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Oregon State University (OSU) Radiation Center (RC) is the location of a one quarter scale model of the Westinghouse Electric Corporation advanced light-water nuclear reactor design called the AP-600. The full scale AP-600 is a 600 megawatt electric nuclear power plant that incorporates unique passive systems to perform the safety functions currently required of all existing nuclear power plants. Passive safety refers to a system's ability to perform its desired function using natural forces such as gravity and natural circulation. This reduces the reliance on active systems to assure plant safety. The Advanced Plant Experiment (APEX) at the OSU RC is an electrically heated simulation of the AP-600 that includes the Nuclear Steam Supply System (NSSS) and all of the passive safety systems. The APEX facility was funded by the United States Department of Energy and the Westinghouse Electric Corporation. The facility was built to perform the long term cooling tests necessary for design certification of the AP-600. The data taken will be used to benchmark the thermal hydraulic computer codes applied in the design certification process and to better understand the phenomena involved in the full scale AP-600. This paper presents the analysis of the Passive Residual Heat Removal System (PRHR) and in particular the PRHR's "c"--Shaped heat exchanger (PRHR Hx). This paper includes analysis and modeling of the PRHR Hx including: hydraulic flow parameters, heat rejection capability, an empirical correlation for determining pressure drop, and an examination of the flow phenomena that occurs in the tank in which the heat exchanger is installed.
Download or read book Nuclear Reactor Thermal Hydraulics written by Robert E. Masterson and published by CRC Press. This book was released on 2019-08-21 with total page 1354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Thermal-Hydraulic Systems provides a comprehensive approach to nuclear reactor thermal-hydraulics, reflecting the latest technologies, reactor designs, and safety considerations. The text makes extensive use of color images, internet links, computer graphics, and other innovative techniques to explore nuclear power plant design and operation. Key fluid mechanics, heat transfer, and nuclear engineering concepts are carefully explained, and supported with worked examples, tables, and graphics. Intended for use in one or two semester courses, the text is suitable for both undergraduate and graduate students. A complete Solutions Manual is available for professors adopting the text.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, SIld disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna and broader dissemination. tional publishing house to assure improved service Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 30 (thesis year 1985) a total of 12,400 theses titles from 26 Canadian and 186 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work.
Download or read book The Thermal hydraulics of a Boiling Water Nuclear Reactor written by Richard T. Lahey and published by . This book was released on 1993 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of the classic monograph gives a comprehensive overview of the thermal-hydraulic technology underlying the design, operation, and safety assessment of boiling water reactors. In addition, new material on pressure suppression containment technology is presented.
Download or read book Handbook on Thermal Hydraulics in Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Elsevier. This book was released on 2024-07-29 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook on Thermal Hydraulics of Water-Cooled Nuclear Reactors, Volume 1, Foundations and Principles includes all new chapters which delve deeper into the topic, adding context and practical examples to help readers apply learnings to their own setting. Topics covered include experimental thermal-hydraulics and instrumentation, numerics, scaling and containment in thermal-hydraulics, as well as a title dedicated to good practices in verification and validation. This book will be a valuable reference for graduate and undergraduate students of nuclear or thermal engineering, as well as researchers in nuclear thermal-hydraulics and reactor technology, engineers working in simulation and modeling of nuclear reactors, and more. In addition, nuclear operators, code developers and safety engineers will also benefit from the practical guidance provided. - Presents a comprehensive analysis on the connection between nuclear power and thermal hydraulics - Includes end-of-chapter questions, quizzes and exercises to confirm understanding and provides solutions in an appendix - Covers applicable nuclear reactor safety considerations and design technology throughout
Download or read book Nuclear Thermal Hydraulic and Two Phase Flow written by Jun Wang and published by Frontiers Media SA. This book was released on 2018-10-11 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear energy is one of the most important clear energy and contributes more than 10% electric power to human society in the past decades of years. The nuclear thermal hydraulic and two-phase flow is one of the basic branches of nuclear technology and provides structure design and safety analysis to the nuclear power reactors. In the new century, the basic theoretical research of thermal hydraulic and two-phase flow, and innovative design for the next generation nuclear power plants (especially for the small modular reactor and molten salt reactor), along with other nuclear branches, constantly support the development of nuclear technology.
Download or read book Status and subjects of thermal hydraulic analysis for next generation LWRs with passive safety systems written by Nihon Genshiryoku Kenkyūjo. Subcommittee on Improvement of Reactor Thermal-Hydraulic Analysis Codes and published by . This book was released on 1998 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook on Thermal Hydraulics in Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Elsevier. This book was released on 2024-07-29 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook on Thermal Hydraulics of Water-Cooled Nuclear Reactors, Volume 2, Modelling includes all new chapters which delve deeper into the topic, adding context and practical examples to help readers apply learnings to their own setting. Topics covered include experimental thermal-hydraulics and instrumentation, numerics, scaling and containment in thermal-hydraulics, as well as a title dedicated to good practices in verification and validation. This book will be a valuable reference for graduate and undergraduate students of nuclear or thermal engineering, as well as researchers in nuclear thermal-hydraulics and reactor technology, engineers working in simulation and modeling of nuclear reactors, and more. In addition, nuclear operators, code developers and safety engineers will also benefit from the practical guidance provided. - Presents a comprehensive analysis on the connection between nuclear power and thermal hydraulics - Includes end-of-chapter questions, quizzes and exercises to confirm understanding and provides solutions in an appendix - Covers applicable nuclear reactor safety considerations and design technology throughout
Download or read book Advanced Reactor Concepts ARC written by Ali Zamani Paydar and published by Elsevier. This book was released on 2023-07-20 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear engineers advancing the energy transition are understanding more about the next generation of nuclear plants; however, it is still difficult to access all the critical types, concepts, and applications in one location. Advanced Reactor Concepts (ARC): A New Nuclear Power Plant Perspective Producing Energy gives engineers and nuclear engineering researchers the comprehensive tools to get up to date on the latest technology supporting generation IV nuclear plant systems. After providing a brief history of this area, alternative technology is discussed such as electromagnetic pumps, heat pipes as control devices, Nuclear Air-Brayton Combined Cycles integration, and instrumentation helping nuclear plants to provide dispatchable electricity to the grid and heat to industry. Packed with examples of all the types, benefits, and challenges involved, Advanced Reactor Concepts (ARC) delivers the go-to reference that engineers need to advance safe nuclear energy as a low-carbon option. - Describes theory and concepts on generation IV technology such as advanced reactor concepts (ARC) and electromagnetic pumps, and compares different types and sizes. - Sets out the energy transition with critical carbon-free technology that can supplement intermittent power sources such as wind and solar. - Explains alternative heat storage technology, including Nuclear Air-Brayton Combined Cycles. - Introduces advanced main instrumentation systems for in-core probes.
Download or read book Heat Pipe Applications in Fission Driven Nuclear Power Plants written by Bahman Zohuri and published by Springer. This book was released on 2019-02-14 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a new and innovative approach for the use of heat pipes and their application in a number of industrial scenarios, including space and nuclear power plants. The book opens by describing the heat pipe and its concept, including sizing, composition and binding energies. It contains mathematical models of high and low temperature pipes along with extensive design and manufacturing models, characteristics and testing programs. A detailed design and safety analysis concludes the book, emphasizing the importance of heat pipe implementation within the main cooling system and within the core of the reactor, making this book a useful resource for students, engineers, and researchers.
Download or read book Nuclear Reactor Thermal Hydraulics and Other Applications written by Donna Guillen and published by BoD – Books on Demand. This book was released on 2013-02-13 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes contributions from researchers around the world on numerical developments and applications to predict fluid flow and heat transfer, with an emphasis on thermal hydraulics computational fluid dynamics. Our ability to simulate larger problems with greater fidelity has vastly expanded over the past decade. The collection of material presented in this book augments the ever-increasing body of knowledge concerning the important topic of thermal hydraulics. Featured topics include coolant channel analysis, thermal hydraulic transport and mixing, as well as hydrodynamics and heat transfer processes. The contents of this book will interest researchers, scientists, engineers and graduate students.
Download or read book Thermal Hydraulic Analysis of an Experimental Reactor Cavity Cooling System with Water written by and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This experimental study investigated the thermal hydraulic behavior and boiling mechanisms present in a scaled reactor cavity cooling system (RCCS). The experimental facility reflects a 1/4 scale model of one conceptual design for decay heat removal in advanced GenIV nuclear reactors. Radiant heaters supply up to 25 kW/m2 onto a three parallel riser tube and cooling panel test section assembly, representative of a 5° sector model of the full scale concept. Derived similarity relations have preserved the thermal hydraulic flow patterns and integral system response, ensuring relevant data and similarity among scales. Attention will first be given to the characterization of design features, form and heat losses, nominal behavior, repeatability, and data uncertainty. Then, tests performed in single-phase have evaluated the steady-state behavior. Following, the transition to saturation and subsequent boiling allowed investigations onto four parametric effects at two-phase flow and will be the primary focus area of remaining analysis. Baseline conditions at two-phase flow were defined by 15.19 kW of heated power and 80% coolant inventory, and resulted in semi-periodic system oscillations by the mechanism of hydrostatic head fluctuations. Void generation was the result of adiabatic expansion of the fluid due to a reduction in hydrostatic head pressure, a phenomena similar to flashing. At higher powers of 17.84 and 20.49 kW, this effect was augmented, creating large flow excursions that followed a smooth and sinusoidal shaped path. Stabilization can occur if the steam outflow condition incorporates a nominal restriction, as it will serve to buffer the short time scale excursions of the gas space pressure and dampen oscillations. The influences of an inlet restriction, imposed by an orifice plate, introduced subcooling boiling within the heated core and resulted in chaotic interactions among the parallel risers. The penultimate parametric examined effects of boil-off and inventory loss, where five different stages of natural circulation flow were identified: single-phase heating, transitional nucleate boiling, hydrostatic head fluctuations, stable two-phase flow, and geysering. Finally, the implementation of the model RCCS to a full scale plant was investigated by a multivariate test simulating an hypothetical accident scenario.
Download or read book Proceedings of Nuclear Thermal Hydraulics written by American Nuclear Society. Thermal Hydraulics Division. Meeting and published by . This book was released on 1990 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt:
