Download or read book Thermal Effects in Fracture of Multiphase Materials written by Klaus P. Herrmann and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a selection of the lectures presented at the Euromech Colloquium 255, held at the Liborianum, Paderborn, from 31 October to 2 November 1989. The subject of the Colloquium "Thermal Effects in Fracture of Multiphase Materials" attracted about 50 scientists from 13 coun tries. Several well known scientists who are active in research on thermal effects in fracture proces ses were present at the Colloquium as lecturers (29 lectures were delivered) as well as valuable participants of the intensive discussions which took part during the sessions, coffe breaks and lunch times. The closing session of the Colloquium was devoted to a general discussion on the trends in the development of the research in the field, the prospects of the theoretical research, new materials (composites, ceramics etc. ), and the trends in technological applications. Over twenty comments and remarks have been made during this final general discussion, showing the interest of the audi torium in such an exchange of viewpoints. However, this discussion is not reflected in this volume. The Colloquium has been subdivided into six sessions: I "Thermodynamics of Fracture Processes" II . "Fracture of Nonhomogeneous Solids" III "Thermal Cracking of Heterogeneous Materials" IV-VI "Fracture Phenomena in Composite Systems I-III" One of the main topics in session I consisted in the description of the influence of thermal effects on shear band localization failure. Thereby shear bands nucleate due.
Download or read book New Achievements in Mechanics written by Wolfgang H. Müller and published by Springer Nature. This book was released on with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Continuum Mechanics written by Otto Brüller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recognized authors contributed to this collection of original papers from all fields of research in continuum mechanics. Special emphasis is given to time dependent and independent permanent deformations, damage and fracture. Part of the contributions is dedicated to current efforts in describing material behavior with regard to, e.g., anisotropy, thermal effects, softening, ductile and brittle fracture, porosity and granular structure. Another part deals with numerical aspects arising from the implementation of material laws in the calculations of forming processes, soil mechanics and structural mechanics. Applications of theory and numerical methods belong to the following areas: Comparison with experimental results from material testing, metal forming under thermal and dynamic conditions, failure by damage, fracture and localized deformation modes. The variety of treated topics provides a survery of the actual research in these fields; therefore, the book is addressed to those interested in special problems of continuum mechanics as well as to those interested in a general knowledge.
Download or read book Advances in Mathematical Modelling of Composite Materials written by Konstantin Z. Markov and published by World Scientific. This book was released on 1994 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers of leading experts in the modern continuum theory of composite materials. The papers expose in detail the newest ideas, approaches, results and perspectives in this broadly interdisciplinary field ranging from pure and applied mathematics, mechanics, physics and materials science. The emphasis is on mathematical modelling and model analysis of the mechanical behaviour and strength of composites, including methods of predicting effective macroscopic properties (dielectric, elastic, nonlinear, inelastic, plastic and thermoplastic) from known microstructures.
Download or read book Thermal Effects on the Dynamic Damage and Fracture of a Dual Phase Automotive Steel written by Sarath Chandran and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Modelling written by English and published by CRC Press. This book was released on 2020-11-26 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Materials Modelling: From Theory to Technology, a distinguished collection of authors has been assembled to celebrate the 60th birthday of Dr. R. Bullough, FRS and honor his contribution to the subject over the past 40 years. The volume explores subjects that have implications in a wide range of technologies, focusing on how basic research can be applied to real problems in science and engineering. Linking theory and technology, the book progresses from the theoretical background to current and future practical applications of modeling. Accessible to a diverse audience, it requires little specialist knowledge beyond a physics degree. The book is useful reading for postgraduates and researchers in condensed matter, nuclear engineering, and physical metallurgy, in addition to workers in R&D laboratories and the high technology industry.
Download or read book IUTAM Symposium on Microstructure Property Interactions in Composite Materials written by R. Pyrz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUT AM Symposium on Microstructure Property Interactions in Composite Ma- rials was held during the dates 22nd to 25th August 1994 in Rebild Bakker Conference Centre, situated in the heart of one of Denmark's most beautiful natural areas. Participation in the Symposium was reserved for invited participants, suggested by members of the Scientific Committee. The cooperation with the Scientific Committee is highly appreciated. The Symposium brought together 76 researchers from 15 countries representing a broad range of backgrounds relevant to the topic of the meeting. The participants represented the disciplines of materials science and engineering, applied mechanics, applied mathematics and scientific computations. The Symposium comprehensively addressed the analytical, numerical and experimental methods that provide an estimation of the overall, effective properties from microstructural data. The 41 contributions emphasized the significance of the microstructure morphology in understanding the nature and origin of a multitude of properties such as viscoelasticity, plasticity, strength and fracture for a variety of polymer, metal and ceramic based composite materials. Specifically, the Symposium examined and reviewed the current state of the art of micromechanical modelling, experimental investigations and morphological qu- tification of composite materials' microstructure. The volume contains 35 papers published in an alphabetic order after the name of the first author. Much to regret of the Scientific Committee some manuscripts were not submitted. The financial support of the IUT AM, the Obels Family Foundation and the Institute of Mechanical Engineering, Aalborg University, is gratefully acknowledged.
Download or read book Reliability and Optimization of Structural Systems 91 written by Rüdiger Rackwitz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains 38 papers presented at the 4th Working Conference on "Rel iability· and Optimization of Structural Systems", held at the Technical University of Munich, Germany, September 11- 13, 1991. The Working Conference was organised by the IFIP (Interna tional Federation for Information Processing) Working Group 7.5 of Technical Committee 7 and was the fourth in a series, following similar conferences held at the University of Aalborg, Den mark, May 1987, at the Imperial College, London, UK, September 1988 and at the University of California, Berkeley, California, USA, March 1990. The Working Conference was attended by 54 participants from 16 countries. The objectives of Working Group 7.5 are: • to promote modern structural systems optimization and reliability theory, • to advance international cooperation in the field of structural system optimization and reliability theory, • to stimulate research, development and application of structural system optimization and reli ability theory, • to further the dissemination and exchange of information on reliability and optimization of structural systems • to encourage education in structural system optimization and reliability theory. At present the members of the Working Group are: A. H.-S. Ang, U.S.A. M. Grimmelt, FRG G. A ugwti, Italy N. C. Lind, Canada M. J. Baker, UK H. O. Mad&en, Denmark P. Bjerager, Norway R. E. Melcher~, Australia C. A. Cornell, U.S.A. F. Mo~e~, U.S.A.
Download or read book Fracture at High Temperatures written by Hermann Riedel and published by Springer. This book was released on 2014-01-13 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elevated Temperature Effects on Fatigue and Fracture written by Robert S. Piascik and published by ASTM International. This book was released on 1997 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IUTAM Symposium on Micro and Macrostructural Aspects of Thermoplasticity written by O.T. Bruhns and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium held in Bochum, Germany, 25-29 August 1997
Download or read book Multiscale Modeling of Complex Materials written by Tomasz Sadowski and published by Springer. This book was released on 2014-10-14 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume deal with materials science, theoretical mechanics and experimental and computational techniques at multiple scales, providing a sound base and a framework for many applications which are hitherto treated in a phenomenological sense. The basic principles are formulated of multiscale modeling strategies towards modern complex multiphase materials subjected to various types of mechanical, thermal loadings and environmental effects. The focus is on problems where mechanics is highly coupled with other concurrent physical phenomena. Attention is also focused on the historical origins of multiscale modeling and foundations of continuum mechanics currently adopted to model non-classical continua with substructure, for which internal length scales play a crucial role.
Download or read book Current Distributions and Electrode Shape Changes in Electrochemical Systems written by Johan Deconinck and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reponds to the increasing demand of computer mo- delling of electrochemical processes in order to improve their speed and efficiency. The fundamental transport equa- tions in dilute solutions are given and it is established in detail under what circumstances a potential model with non- linear boundary conditions, involved by electrode reactions, can beused. Attention is directed towards the most impor- tant solution techniquesFEM, FDM and BEM and towards the solution of the non-linear system of equations (Successive Substitution, Newton-Raphson). Using the BEM, several two- dimensional and axisymmetrical examples of current density distributions are given and quantitative data, obtained in a copper electro-refining cell, are compared with calculated results. Applying Faraday's Law and the BEM, simulation of electro-deposition, electro-chemical levelling and machining are treated. Accuracy and stabilityare emphasized.
Download or read book Thermoelastic Fracture Mechanics written by Vera Petrova and published by Materials Research Forum LLC. This book was released on 2024-02-10 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with the thermal and mechanical fracture of functionally graded materials on homogeneous substrate (FGM/H) structures. Emphasis is placed on multiple crack interactions. FGMs have a wide range of engineering applications; especially in thermal barrier coatings. Potentially desirable thermal and mechanical properties of functionally graded coatings (FGCs) are analyzed as well as available real material combinations, e.g. (ceramic/metal)/metal. Keywords: Thermal Fracture, Mechanical Fracture, Functionally Graded/Homogeneous Bimaterial, Thermo-Mechanical Loading, Mathematical Modelling, Thermal Stress Intensity, Fracture Criteria, Crack Closure, Systems of Cracks, Edge Cracks, Internal Cracks, Cracks Imitating a Curved Interface, Multiple Cracks Interaction, Thermal Barrier Coating, Thermal Fracture Resistance.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalog of National Bureau of Standards Publications 1966 1976 written by United States. National Bureau of Standards and published by . This book was released on 1978 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Irreversible Effects of High Pressure and Temperature on Materials written by and published by ASTM International. This book was released on 1965 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
