Download or read book Thermal Design and Characterization of Heterogeneously Integrated InGaP GaAs HBTs written by and published by . This book was released on 2016 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flip-chip heterogeneously integrated n-p-n InGaP/GaAs heterojunction bipolar transistors (HBTs) with integrated thermal management on wide-bandgap AlN substrates followed by GaAs substrate removal are demonstrated. Without thermal management, substrate removal after integration significantly aggravates self-heating effects, causing poor I-V characteristics due to excessive device self-heating. An electrothermal codesign scheme is demonstrated that involves simulation (design), thermal characterization, fabrication, and evaluation. Thermoreflectance thermal imaging, electrical-temperature sensitive parameter-based thermometry, and infrared thermography were utilized to assess the junction temperature rise in HBTs under diverse configurations. In order to reduce the thermal resistance of integrated devices, passive cooling schemes assisted by structural modification, i.e., positioning indium bump heat sinks between the devices and the carrier, were employed. By implementing thermal heat sinks in close proximity to the active region of flip-chip integrated HBTs, the junction-to-baseplate thermal resistance was reduced over a factor of two, as revealed by junction temperature measurements and improvement of electrical performance. In conclusion, the suggested heterogeneous integration method accounts for not only electrical but also thermal requirements providing insight into realization of advanced and robust III-V/Si heterogeneously integrated electronics.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2002 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microwave and Wireless Synthesizers written by Ulrich L. Rohde and published by John Wiley & Sons. This book was released on 2021-04-27 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of the leading resource on designing digital frequency synthesizers from microwave and wireless applications, fully updated to reflect the most modern integrated circuits and semiconductors Microwave and Wireless Synthesizers: Theory and Design, Second Edition, remains the standard text on the subject by providing complete and up-to-date coverage of both practical and theoretical aspects of modern frequency synthesizers and their components. Featuring contributions from leading experts in the field, this classic volume describes loop fundamentals, noise and spurious responses, special loops, loop components, multiloop synthesizers, and more. Practical synthesizer examples illustrate the design of a high-performance hybrid synthesizer and performance measurement techniques—offering readers clear instruction on the various design steps and design rules. The second edition includes extensively revised content throughout, including a modern approach to dealing with the noise and spurious response of loops and updated material on digital signal processing and architectures. Reflecting today's technology, new practical and validated examples cover a combination of analog and digital synthesizers and hybrid systems. Enhanced and expanded chapters discuss implementations of direct digital synthesis (DDS) architectures, the voltage-controlled oscillator (VCO), crystal and other high-Q based oscillators, arbitrary waveform generation, vector signal generation, and other current tools and techniques. Now requiring no additional literature to be useful, this comprehensive, one-stop resource: Provides a fully reviewed, updated, and enhanced presentation of microwave and wireless synthesizers Presents a clear mathematical method for designing oscillators for best noise performance at both RF and microwave frequencies Contains new illustrations, figures, diagrams, and examples Includes extensive appendices to aid in calculating phase noise in free-running oscillators, designing VHF and UHF oscillators with CAD software, using state-of-the-art synthesizer chips, and generating millimeter wave frequencies using the delay line principle Containing numerous designs of proven circuits and more than 500 relevant citations from scientific journal and papers, Microwave and Wireless Synthesizers: Theory and Design, Second Edition, is a must-have reference for engineers working in the field of radio communication, and the perfect textbook for advanced electrical engineering students.
Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.
Download or read book Clean Electricity From Photovoltaics written by Mary D Archer and published by World Scientific. This book was released on 2001-06-04 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic cells provide clean, reversible electrical power from the sun. Made from semiconductors, they are durable, silent in operation and free of polluting emissions. In this book, experts from all sectors of the PV community — materials scientists, physicists, production engineers, economists and environmentalists — give their critical appraisals of where the technology is now and what its prospects are./a
Download or read book Failure Analysis written by Marius Bazu and published by John Wiley & Sons. This book was released on 2011-03-08 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure analysis is the preferred method to investigate product or process reliability and to ensure optimum performance of electrical components and systems. The physics-of-failure approach is the only internationally accepted solution for continuously improving the reliability of materials, devices and processes. The models have been developed from the physical and chemical phenomena that are responsible for degradation or failure of electronic components and materials and now replace popular distribution models for failure mechanisms such as Weibull or lognormal. Reliability engineers need practical orientation around the complex procedures involved in failure analysis. This guide acts as a tool for all advanced techniques, their benefits and vital aspects of their use in a reliability programme. Using twelve complex case studies, the authors explain why failure analysis should be used with electronic components, when implementation is appropriate and methods for its successful use. Inside you will find detailed coverage on: a synergistic approach to failure modes and mechanisms, along with reliability physics and the failure analysis of materials, emphasizing the vital importance of cooperation between a product development team involved the reasons why failure analysis is an important tool for improving yield and reliability by corrective actions the design stage, highlighting the ‘concurrent engineering' approach and DfR (Design for Reliability) failure analysis during fabrication, covering reliability monitoring, process monitors and package reliability reliability resting after fabrication, including reliability assessment at this stage and corrective actions a large variety of methods, such as electrical methods, thermal methods, optical methods, electron microscopy, mechanical methods, X-Ray methods, spectroscopic, acoustical, and laser methods new challenges in reliability testing, such as its use in microsystems and nanostructures This practical yet comprehensive reference is useful for manufacturers and engineers involved in the design, fabrication and testing of electronic components, devices, ICs and electronic systems, as well as for users of components in complex systems wanting to discover the roots of the reliability flaws for their products.
Download or read book Understanding Modern Transistors and Diodes written by David L. Pulfrey and published by Cambridge University Press. This book was released on 2010-01-28 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in a concise, easy-to-read style, this text for senior undergraduate and graduate courses covers all key topics thoroughly. It is also a useful self-study guide for practising engineers who need a complete, up-to-date review of the subject. Key features: • Rigorous theoretical treatment combined with practical detail • A theoretical framework built up systematically from the Schrödinger Wave Equation and the Boltzmann Transport Equation • Covers MOSFETS, HBTs and HJFETS • Uses the PSP model for MOSFETS • Rigorous treatment of device capacitance • Describes the operation of modern, high-performance transistors and diodes • Evaluates the suitability of various transistor types and diodes for specific modern applications • Covers solar cells and LEDs and their potential impact on energy generation and reduction • Includes a chapter on nanotransistors to prepare students and professionals for the future • Provides results of detailed numerical simulations to compare with analytical solutions • End-of-chapter exercises • Online lecture slides for undergraduate and graduate courses
Download or read book Metalorganic Vapor Phase Epitaxy MOVPE written by Stuart Irvine and published by John Wiley & Sons. This book was released on 2019-10-07 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically discusses the growth method, material properties, and applications for key semiconductor materials MOVPE is a chemical vapor deposition technique that produces single or polycrystalline thin films. As one of the key epitaxial growth technologies, it produces layers that form the basis of many optoelectronic components including mobile phone components (GaAs), semiconductor lasers and LEDs (III-Vs, nitrides), optical communications (oxides), infrared detectors, photovoltaics (II-IV materials), etc. Featuring contributions by an international group of academics and industrialists, this book looks at the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring. It covers the most important materials from III-V and II-VI compounds to quantum dots and nanowires, including sulfides and selenides and oxides/ceramics. Sections in every chapter of Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications cover the growth of the particular materials system, the properties of the resultant material, and its applications. The book offers information on arsenides, phosphides, and antimonides; nitrides; lattice-mismatched growth; CdTe, MCT (mercury cadmium telluride); ZnO and related materials; equipment and safety; and more. It also offers a chapter that looks at the future of the technique. Covers, in order, the growth method, material properties, and applications for each material Includes chapters on the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring Looks at important materials such as III-V and II-VI compounds, quantum dots, and nanowires Provides topical and wide-ranging coverage from well-known authors in the field Part of the Materials for Electronic and Optoelectronic Applications series Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications is an excellent book for graduate students, researchers in academia and industry, as well as specialist courses at undergraduate/postgraduate level in the area of epitaxial growth (MOVPE/ MOCVD/ MBE).
Download or read book Heteroepitaxy of Semiconductors written by John E. Ayers and published by CRC Press. This book was released on 2016-10-03 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past ten years, heteroepitaxy has continued to increase in importance with the explosive growth of the electronics industry and the development of a myriad of heteroepitaxial devices for solid state lighting, green energy, displays, communications, and digital computing. Our ever-growing understanding of the basic physics and chemistry underlying heteroepitaxy, especially lattice relaxation and dislocation dynamic, has enabled an ever-increasing emphasis on metamorphic devices. To reflect this focus, two all-new chapters have been included in this new edition. One chapter addresses metamorphic buffer layers, and the other covers metamorphic devices. The remaining seven chapters have been revised extensively with new material on crystal symmetry and relationships, III-nitride materials, lattice relaxation physics and models, in-situ characterization, and reciprocal space maps.
Download or read book Handbook of Terahertz Technologies written by Ho-Jin Song and published by CRC Press. This book was released on 2015-04-15 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Terahertz waves, which lie in the frequency range of 0.1-10 THz, have long been investigated in a few limited fields, such as astronomy, because of a lack of devices for their generation and detection. Several technical breakthroughs made over the last couple of decades now allow us to radiate and detect terahertz waves more easily, which has trigg
Download or read book Dilute Nitride Semiconductors written by Mohamed Henini and published by Elsevier. This book was released on 2004-12-15 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: - This book contains full account of the advances made in the dilute nitrides, providing an excellent starting point for workers entering the field. - It gives the reader easier access and better evaluation of future trends, Conveying important results and current ideas. - Includes a generous list of references at the end of each chapter, providing a useful reference to the III-V-N based semiconductors research community. The high speed lasers operating at wavelength of 1.3 μm and 1.55 μm are very important light sources in optical communications since the optical fiber used as a transport media of light has dispersion and attenuation minima, respectively, at these wavelengths. These long wavelengths are exclusively made of InP-based material InGaAsP/InP. However, there are several problems with this material system. Therefore, there has been considerable effort for many years to fabricate long wavelength laser structures on other substrates, especially GaAs. The manufacturing costs of GaAs-based components are lower and the processing techniques are well developed. In 1996 a novel quaternary material GaInAsN was proposed which could avoid several problems with the existing technology of long wavelength lasers. In this book, several leaders in the field of dilute nitrides will cover the growth and processing, experimental characterization, theoretical understanding, and device design and fabrication of this recently developed class of semiconductor alloys. They will review their current status of research and development. Dilute Nitrides (III-N-V) Semiconductors: Physics and Technology organises the most current available data, providing a ready source of information on a wide range of topics, making this book essential reading for all post graduate students, researchers and practitioners in the fields of Semiconductors and Optoelectronics - Contains full account of the advances made in the dilute nitrides, providing an excellent starting point for workers entering the field - Gives the reader easier access and better evaluation of future trends, conveying important results and current ideas - Includes a generous list of references at the end of each chapter, providing a useful reference to the III-V-N based semiconductors research community
Download or read book Mobile Terminal Receiver Design written by Sajal Kumar Das and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOBILE TERMINAL RECEIVER DESIGN MOBILE TERMINAL RECEIVER DESIGN LTE and LTE-Advanced India This all-in-one guide addresses the challenges of designing innovative mobile handset solutions that offer smaller size, low power consumption, low cost, and tremendous flexibility, with improved data rates and higher performance. Readers are introduced to mobile phone system architecture and its basic building blocks, different air interface standards and operating principles, before progressing to hardware anatomy, software and protocols, and circuits for legacy and next-generation smart phones, including various research areas in 4G and 5G systems. Mobile Terminal Receiver Design/p? ulliexplains basic working principles, system architecture and specification detailsof legacy and possible next-generation mobile systems, from principle to practiceto product; covers in detail RF transmitter and receiver blocks, digital baseband processingblocks, receiver and transmitter signal processing, protocol stack, AGC, AFC, ATC,power supply, clocking; features important topics like connectivity and application modules with differentdesign solutions for tradeoff exploration; discusses multi-RAT design requirements, key design attributes such as low powerconsumption, slim form factors, seamless I-RAT handover, sensitivity, and selectivity. It will help software, hardware, and radio frequency design engineers to understand the evolution of radio access technologies and to design competitive and innovative mobile solutions and devices. Graduates, postgraduate students, and researchers in mobile telecommunications disciplines will also find this book a handy reference.
Download or read book 2018 IEEE International Semiconductor Laser Conference ISLC written by IEEE Staff and published by . This book was released on 2018-09-16 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Semiconductor Laser Conference has a long tradition as the leading international conference where researchers and engineers from all over the world meet to share and discuss the latest developments in semiconductor lasers, amplifiers and LEDs The 25th International Semiconductor Laser Conference will be held in Kobe Japan from 12 15 September 2016 The conference will include both oral and poster sessions of contributed and invited papers, as well as a plenary session comprising reviews on a number of important and timely topics A rump session will feature special topics of current interest for discussion in a more relaxed and open atmosphere In addition, attendees will be able to participate in workshops on current hot topics during the first day of the conference Technical results on all aspects of semiconductor lasers, amplifiers, LEDs and integrated devices, from basic physics of new materials and structures to new and improved device concepts are covered
Download or read book American Doctoral Dissertations written by and published by . This book was released on 2002 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Self Assembled Quantum Dots written by Zhiming M Wang and published by Springer Science & Business Media. This book was released on 2007-11-29 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multidisciplinary book provides up-to-date coverage of carrier and spin dynamics and energy transfer and structural interaction among nanostructures. Coverage also includes current device applications such as quantum dot lasers and detectors, as well as future applications to quantum information processing. The book will serve as a reference for anyone working with or planning to work with quantum dots.
Download or read book Convergence of More Moore More than Moore and Beyond Moore written by Simon Deleonibus and published by CRC Press. This book was released on 2021-02-16 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The era of Sustainable and Energy Efficient Nanoelectronics and Nanosystems has come. The research and development on Scalable and 3D integrated Diversified functions together with new computing architectures is in full swing. Besides data processing, data storage, new sensing modes and communication capabilities need the revision of process architecture to enable the Heterogeneous co integration of add-on devices with CMOS: the new defined functions and paradigms open the way to Augmented Nanosystems. The choices for future breakthroughs will request the study of new devices, circuits and computing architectures and to take new unexplored paths including as well new materials and integration schmes. This book reviews in two sections, including seven chapters, essential modules to build Diversified Nanosystems based on Nanoelectronics and finally how they pave the way to the definition of Nanofunctions for Augmented Nanosystems.
