Download or read book Theory and Design of Cryogenic Systems written by Alekseĭ Mikhaĭlovich Arkharov and published by . This book was released on 1981 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cryogenic Engineering Second Edition Revised and Expanded written by Thomas Flynn and published by CRC Press. This book was released on 2004-11-30 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an engineering consultant with over 48 years of experience in the field, this Second Edition provides a reader-friendly and thorough discussion of the fundamental principles and science of cryogenic engineering including the properties of fluids and solids, refrigeration and liquefaction, insulation, instrumentation, natural gas processing, and safety in cryogenic system design.
Download or read book Cryocoolers written by Milind D. Atrey and published by Springer Nature. This book was released on 2020-02-24 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as an introduction to cryocooler technology and describes the principle applications of cryocoolers across a broad range of fields. It covers the specific requirements of these applications, and describes how the advantages and disadvantages of different cryocooler systems are taken into consideration. For example, Stirling coolers tend to be used only in space applications because of their high coefficient of performance, low weight and proven reliability, whilst Gifford-McMahon coolers are used for ground applications, such as in cryopumps and MRI shield cooling applications. Joule-Thomson cryocoolers are used in missile technology because of the fast cool down requirements. The cryocooler field is fast developing and the number of applications are growing because of the increasing costs of the cryogens such as Helium and Neon. The first chapter of the book introduces the different types of cryocoolers, their classification, working principles, and their design aspects, and briefly mentions some of the applications of these systems. This introductory chapter is followed by a number of contributions from prominent international researchers, each describing a specific field of application, the cooling requirements and the cryocooler systems employed. These areas of application include gas liquefaction, space technology, medical science, dilution refrigerators, missile systems, and physics research including particle accelerators. Each chapter describes the cooling requirements based on the end use, the approximate cooling load calculations, the criteria for cryocooler selection, the arrangement for cryocooler placement, the connection of the cooler to the object to be cooled, and includes genuine case studies. Intended primarily for researchers working on cryocoolers, the book will also serve as an introduction to cryocooler technology for students, and a useful reference for those using cryocooler systems in any area of application.
Download or read book Low Temperature and Cryogenic Refrigeration written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refrigeration plays a prominent role in our everyday lives, and cryogenics plays a major role in medical science, space technology and the cooling of low-temperature electronics. This volume contains chapters on basic refrigeration systems, non-compression refrigeration and cooling, and topics related to global environmental issues, alternative refrigerants, optimum refrigerant selection, cost-quality optimization of refrigerants, advanced thermodynamics of reverse-cycle machines, applications in medicine, cryogenics, heat pipes, gas-solid absorption refrigeration, multisalt resorption heat pumps, cryocoolers, thermoacoustic refrigeration, cryogenic heat transfer and enhancement and other topics covering theory, design, and applications, such as pulse tube refrigeration, which is the most efficient of all cryocoolers and can be used in space missions.
Download or read book Cryogenic Regenerative Heat Exchangers written by Robert A. Ackermann and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth survey of regenerative heat exchangers, this book chronicles the development and recent commercialization of regenerative devices for cryogenic applications. Chapters cover historical background, concepts, practical applications, design data, and numerical solutions, providing the latest information for engineers to develop advanced cryogenic machines. The discussions include insights into the operation of a regenerator; descriptions of the cyclic and fluid temperature distributions in a regenerator; data for various matrix geometries and materials, including coarse and fine bronze, stainless steel-woven wire mesh screens, and lead spheres; and unique operating features of cryocoolers that produce deviations from ideal regenerator theory.
Download or read book Cryogenic Helium Refrigeration for Middle and Large Powers written by Guy Gistau Baguer and published by Springer Nature. This book was released on 2020-10-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a practical introduction to helium refrigeration engineering, taking a logical and structured approach to the design, building, commissioning, operation and maintenance of refrigeration systems. It begins with a short refresher of cryogenic principles, and a review of the theory of heat exchangers, allowing the reader to understand the importance of the heat exchanger role in the various thermodynamic cycle structures. The cycles are considered from the simplest (Joule Thomson) to the most complicated ones for the very large refrigeration plants and, finally, those operating at temperatures lower than 4.5 K. The focus then turns to the operation, ability and limitations of the main components, including room temperature cycle screw compressors, heat exchangers, cryogenic expansion turbines, cryogenic centrifugal compressors and circulators. The book also describes the basic principles of process control and studies the operating situations of helium plants, with emphasis on high level efficiency. A major issue is helium purity, and the book explains why helium is polluted, how to purify it and then how to check its purity, to ensure that all components are filled with pure helium prior to starting. Although the intention of the book is not to design thermodynamic cycles, it is of interest to a designer or operator of a cryogenic system to perform some simplified calculations to get an idea of how components or systems are behaving. Throughout the book, such calculations are generally performed using Microsoft® Excel and the Gaspak® or Hepak® software.
Download or read book Physics of Cryogenics written by Bahman Zohuri and published by Elsevier. This book was released on 2017-11-17 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics of Cryogenics: An Ultralow Temperature Phenomenon discusses the significant number of advances that have been made during the last few years in a variety of cryocoolers, such as Brayton, Joule-Thomson, Stirling, pulse tube, Gifford-McMahon and magnetic refrigerators. The book reviews various approaches taken to improve reliability, a major driving force for new research areas. The advantages and disadvantages of different cycles are compared, and the latest improvements in each of these cryocoolers is discussed. The book starts with the thermodynamic fundamentals, followed by the definition of cryogenic and the associated science behind low temperature phenomena and properties. This book is an ideal resource for scientists, engineers and graduate and senior undergraduate students who need a better understanding of the science of cryogenics and related thermodynamics. - Defines the fundamentals of thermodynamics that are associated with cryogenic processes - Provides an overview of the history of the development of cryogenic technology - Includes new, low temperature tables written by the author - Deals with the application of cryogenics to preserve objects at very low temperature - Explains how cryogenic phenomena work for human cell and human body preservations and new medical approaches
Download or read book Experimental Techniques for Low Temperature Measurements written by Jack Ekin and published by Oxford University Press. This book was released on 2006-10-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher description
Download or read book Cryogenic Technology and Applications written by A.R. Jha and published by Elsevier. This book was released on 2011-04-01 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cryogenic Technology and Applications describes the need for smaller cryo-coolers as a result of the advances in the miniaturization of electrical and optical devices and the need for cooling and conducting efficiency. Cryogenic technology deals with materials at low temperatures and the physics of their behavior at these temps. The book demonstrates the ongoing new applications being discovered for cryo-cooled electrical and optical sensors and devices, with particular emphasis on high-end commercial applications in medical and scientific fields as well as in the aerospace and military industries. This book summarizes the important aspects of cryogenic technology critical to the design and development of refrigerators, cryo-coolers, and micro-coolers needed by various commercial, industrial, space and military systems. Cryogenic cooling plays an important role in unmanned aerial vehicle systems, infrared search and track sensors, missile warning receivers, satellite tracking systems, and a host of other commercial and military systems.* Provides an overview of the history of the development of cryogenic technology* Includes the latest information on micro-coolers for military and space applications* Offers detailed information on high-capacity cryogenic refrigerator systems used in applications such as food storage, high-power microwave and laser sensors, medical diagnostics, and infrared detectors
Download or read book Sustainable Machining written by J. Paulo Davim and published by Springer. This book was released on 2017-03-19 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.
Download or read book Cryogenic Systems written by Pasquale Arpaia and published by Momentum Press. This book was released on 2017-10-17 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, advanced methods and techniques of monitoring, fault diagnostics, and predictive maintenance for cryogenics are illustrated. In Part I on Background, mainstreams in the related research are reviewed. In Part II of Methods, for monitoring helium distribution and consumption in cryogenic systems for particle accelerators, a virtual flowmeter is presented. Then, for fault diagnostics, two methods, for fault detection on a compressor, and for distributed diagnostics based on a micro-genetic algorithm, are described. Finally, for predictive maintenance, a metaheuristic optimization scheduling algorithm is illustrated. In Part III of Application examples, several practical case studies are described for highlighting the application of the previous methods to cryogenics of particle accelerators at CERN.
Download or read book Cryostat Design written by J.G. Weisend II and published by Springer. This book was released on 2016-08-12 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enables the reader to learn the fundamental and applied aspects of practical cryostat design by examining previous design choices and resulting cryostat performance. Through a series of extended case studies the book presents an overview of existing cryostat design covering a wide range of cryostat types and applications, including the magnet cryostats that comprise the majority of the Large Hadron Collider at CERN, space-borne cryostats containing sensors operating below 1 K, and large cryogenic liquid storage vessels. It starts with an introductory section on the principles of cryostat design including practical data and equations. This section is followed by a series of case studies on existing cryostats, describing the specific requirements of the cryostat, the challenges involved and the design choices made along with the resulting performance of the cryostat. The cryostat examples used in the studies are chosen to cover a broad range of cryostat applications and the authors of each case are leading experts in the field, most of whom participated in the design of the cryostats being described. The concluding chapter offers an overview of lessons learned and summarises some key hints and tips for practical cryostat design. The book will help the reader to expand their knowledge of many disciplines required for good cryostat design, including the cryogenic properties of materials, heat transfer and thermal insulation, instrumentation, safety, structures and seals.
Download or read book Heat Transfer in Aerospace Applications written by Bengt Sundén and published by Academic Press. This book was released on 2016-10-19 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer in Aerospace Applications is the first book to provide an overall description of various heat transfer issues of relevance for aerospace applications. The book contains chapters relating to convection cooling, heat pipes, ablation, heat transfer at high velocity, low pressure and microgravity, aircraft heat exchangers, fuel cells, and cryogenic cooling systems. Chapters specific to low density heat transfer (4) and microgravity heat transfer (9) are newer subjects which have not been previously covered. The book takes a basic engineering approach by including correlations and examples that an engineer needs during the initial phases of vehicle design or to quickly analyze and solve a specific problem. Designed for mechanical, chemical, and aerospace engineers in research institutes, companies, and consulting firms, this book is an invaluable resource for the latest on aerospace heat transfer engineering and research. - Provides an overall description of heat transfer issues of relevance for aerospace applications - Discusses why thermal problems arise and introduces the various heat transfer modes - Helps solve the problem of selecting and calculating the cooling system, the heat exchanger, and heat protection - Features a collection of problems in which the methods presented in the book can be used to solve these problems
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design for Thermal Stresses written by Randall F. Barron and published by John Wiley & Sons. This book was released on 2011-09-07 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools engineers need for effective thermal stress design Thermal stress concerns arise in many engineering situations, from aerospace structures to nuclear fuel rods to concrete highway slabs on a hot summer day. Having the tools to understand and alleviate these potential stresses is key for engineers in effectively executing a wide range of modern design tasks. Design for Thermal Stresses provides an accessible and balanced resource geared towards real-world applications. Presenting both the analysis and synthesis needed for accurate design, the book emphasizes key principles, techniques, and approaches for solving thermal stress problems. Moving from basic to advanced topics, chapters cover: Bars, beams, and trusses from a "strength of materials" perspective Plates, shells, and thick-walled vessels from a "theory of elasticity" perspective Thermal buckling in columns, beams, plates, and shells Written for students and working engineers, this book features numerous sample problems demonstrating concepts at work. In addition, appendices include important SI units, relevant material properties, and mathematical functions such as Bessel and Kelvin functions, as well as characteristics of matrices and determinants required for designing plates and shells. Suitable as either a working reference or an upper-level academic text, Design for Thermal Stresses gives students and professional engineers the information they need to meet today's thermal stress design challenges.
Download or read book Thermal Design and Optimization written by Adrian Bejan and published by John Wiley & Sons. This book was released on 1995-12-12 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and rigorous introduction to thermal system designfrom a contemporary perspective Thermal Design and Optimization offers readers a lucid introductionto the latest methodologies for the design of thermal systems andemphasizes engineering economics, system simulation, andoptimization methods. The methods of exergy analysis, entropygeneration minimization, and thermoeconomics are incorporated in anevolutionary manner. This book is one of the few sources available that addresses therecommendations of the Accreditation Board for Engineering andTechnology for new courses in design engineering. Intended forclassroom use as well as self-study, the text provides a review offundamental concepts, extensive reference lists, end-of-chapterproblem sets, helpful appendices, and a comprehensive case studythat is followed throughout the text. Contents include: * Introduction to Thermal System Design * Thermodynamics, Modeling, and Design Analysis * Exergy Analysis * Heat Transfer, Modeling, and Design Analysis * Applications with Heat and Fluid Flow * Applications with Thermodynamics and Heat and Fluid Flow * Economic Analysis * Thermoeconomic Analysis and Evaluation * Thermoeconomic Optimization Thermal Design and Optimization offers engineering students,practicing engineers, and technical managers a comprehensive andrigorous introduction to thermal system design and optimizationfrom a distinctly contemporary perspective. Unlike traditionalbooks that are largely oriented toward design analysis andcomponents, this forward-thinking book aligns itself with anincreasing number of active designers who believe that moreeffective, system-oriented design methods are needed. Thermal Design and Optimization offers a lucid presentation ofthermodynamics, heat transfer, and fluid mechanics as they areapplied to the design of thermal systems. This book broadens thescope of engineering design by placing a strong emphasis onengineering economics, system simulation, and optimizationtechniques. Opening with a concise review of fundamentals, itdevelops design methods within a framework of industrialapplications that gradually increase in complexity. Theseapplications include, among others, power generation by large andsmall systems, and cryogenic systems for the manufacturing,chemical, and food processing industries. This unique book draws on the best contemporary thinking aboutdesign and design methodology, including discussions of concurrentdesign and quality function deployment. Recent developments basedon the second law of thermodynamics are also included, especiallythe use of exergy analysis, entropy generation minimization, andthermoeconomics. To demonstrate the application of important designprinciples introduced, a single case study involving the design ofa cogeneration system is followed throughout the book. In addition, Thermal Design and Optimization is one of the best newsources available for meeting the recommendations of theAccreditation Board for Engineering and Technology for more designemphasis in engineering curricula. Supported by extensive reference lists, end-of-chapter problemsets, and helpful appendices, this is a superb text for both theclassroom and self-study, and for use in industrial design,development, and research. A detailed solutions manual is availablefrom the publisher.
Download or read book Introduction to Spacecraft Thermal Design written by Eric Silk and published by Cambridge University Press. This book was released on 2020-07-09 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develop a fundamental understanding of heat transfer analysis techniques as applied to earth based spacecraft with this practical guide. Written in a tutorial style, this essential text provides a how-to manual tailored for those who wish to understand and develop spacecraft thermal analyses. Providing an overview of basic heat transfer analysis fundamentals such as thermal circuits, limiting resistance, MLI, environmental thermal sources and sinks, as well as contemporary space based thermal technologies, and the distinctions between design considerations inherent to room temperature and cryogenic temperature applications, this is the perfect tool for graduate students, professionals and academic researchers.
