Download or read book Optical Measurements written by Franz Mayinger and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing possibilities of computer-aided data processing have caused a new revival of optical techniques in many areas of mechanical and chemical en gineering. Optical methods have a long tradition in heat and mass transfer and in fluid dynamics. Global experimental information is not sufficient for developing constitution equations to describe complicated phenomena in fluid dynamics or in transfer processes by a computer program . Furthermore, a detailed insight with high local and temporal resolution into the thermo-and fluiddynamic situations is necessary. Sets of equations for computer program in thermo dynamics and fluid dynamics usually consist of two types of formulations: a first one derived from the conservation laws for mass, energy and momentum, and a second one mathematically modelling transport processes like laminar or turbulent diffusion. For reliably predicting the heat transfer, for example, the velocity and temperature field in the boundary layer must be known, or a physically realistic and widely valid correlation describing the turbulence must be avail able. For a better understanding of combustion processes it is necessary to know the local concentration and temperature just ahead of the flame and in the ignition zone.
Download or read book The Use of the Laser Doppler Velocimeter for Flow Measurements written by Warren H. Stevenson and published by . This book was released on 1972 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulence Measurements with a Laser Doppler Velocimeter written by William Joseph Yanta and published by . This book was released on 1973 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence measurements with a Laser Doppler Velocimeter (LDV) using the dual scatter or differential Doppler mode have been made in a subsonic, fully developed channel flow. The measurements were made using only those light scattering particles occurring naturally in air. Results include mean velocity profiles, turbulence intensities, Reynolds stress distributions and a skewness measurement of the velocity distribution function across the channel. Statistical techniques were used to obtain the various turbulence parameters. Guidelines have been established for the amount of data needed to obtain results with a specified accuracy and confidence level. Measurements have also been made to determine the particle-size distribution. An aerodynamic means was used to determine the size distribution, in contrast to the usual optical procedures. (Modified author abstract).
Download or read book Laser Systems in Flow Measurement written by Tariq Durrani and published by Springer. This book was released on 2011-12-27 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is now well established that laser flow-measuring systems have important advantages over more conventional techniques both for industrial and laboratory applications. These fundamental advantages are indicated by the enormous research effort which has gone into their development over the last decade and by the number of commercial systems which have become available. Although the field is still developing, the most important theoretical results required for relating the system outputs to the fluid flow parameters have now been formulated and a book on the subject therefore seems timely. In the text we have tried to collect together the most important results both from our own papers and from publications by other authors and to present these in a concise and easily readable form. Emphasis has been placed on the fundamental theory and limitations associated with the various techniques rather than on detailed description of specific systems. We have also included a number of new results on areas such as photon counting in turbulent and periodic flows, frequency domain and time domain analysis of laser Doppler velocimeter signals, effect of background noise on system performance, and on cross-correlation techniques for diffusing flows.
Download or read book Laser Doppler and Phase Doppler Measurement Techniques written by H.-E. Albrecht and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing the first comprehensive treatment, this book covers all aspects of the laser Doppler and phase Doppler measurement techniques, including light scattering from small particles, fundamental optics, system design, signal and data processing, tracer particle generation, and applications in single and two-phase flows. The book is intended as both a reference book for more experienced users as well as an instructional book for students. It provides ample material as a basis for a lecture course on the subject and represents one of the most comprehensive treatments of the phase Doppler technique to date. The book will serve as a valuable reference book in any fluid mechanics laboratory where the laser Doppler or phase Doppler techniques are used. This work reflects the authors' long practical experience in the development of the techniques and equipment, as the many examples confirm.
Download or read book High Resolution Imaging in Microscopy and Ophthalmology written by Josef F. Bille and published by Springer. This book was released on 2019-08-13 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides a comprehensive overview of the application of the newest laser and microscope/ophthalmoscope technology in the field of high resolution imaging in microscopy and ophthalmology. Starting by describing High-Resolution 3D Light Microscopy with STED and RESOLFT, the book goes on to cover retinal and anterior segment imaging and image-guided treatment and also discusses the development of adaptive optics in vision science and ophthalmology. Using an interdisciplinary approach, the reader will learn about the latest developments and most up to date technology in the field and how these translate to a medical setting. High Resolution Imaging in Microscopy and Ophthalmology – New Frontiers in Biomedical Optics has been written by leading experts in the field and offers insights on engineering, biology, and medicine, thus being a valuable addition for scientists, engineers, and clinicians with technical and medical interest who would like to understand the equipment, the applications and the medical/biological background. Lastly, this book is dedicated to the memory of Dr. Gerhard Zinser, co-founder of Heidelberg Engineering GmbH, a scientist, a husband, a brother, a colleague, and a friend.
Download or read book Pneumatic Conveying of Solids written by G.E. Klinzing and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: When the four of us decided to collaborate to write this book on pneumatic conveying, there were two aspects which were of some concern. Firstly, how could four people, who liveon four different continents, write a book on a fairly complex subject with such wide lines of communications? Secondly, there was the problem that two of the authors are chemical engineers.It has been noted that the majority of chemical engineers who work in the field of pneumatic conveying research have spent most of their time considering flow in vertical pipes. As such, there was some concern that the book might be biased towards vertical pneumatic conveying and that the horizontal aspects (which are clearly the most difficult!) would be somewhat neglected. We hope that you, as the reader, are going to be satisfied with the fact that you have a truly international dissertation on pneumatic conveying and, also, that there is an even spread between the theoretical and practical aspects of pneumatic conveying technology.
Download or read book Fluid Flow Measurement written by Paul J. LaNasa and published by Butterworth-Heinemann. This book was released on 2014-04-12 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a tendency to make flow measurement a highly theoretical and technical subject but what most influences quality measurement is the practical application of meters, metering principles, and metering equipment and the use of quality equipment that can continue to function through the years with proper maintenance have the most influence in obtaining quality measurement. This guide provides a review of basic laws and principles, an overview of physical characteristics and behavior of gases and liquids, and a look at the dynamics of flow. The authors examine applications of specific meters, readout and related devices, and proving systems. Practical guidelines for the meter in use, condition of the fluid, details of the entire metering system, installation and operation, and the timing and quality of maintenance are also included. This book is dedicated to condensing and sharing the authors' extensive experience in solving flow measurement problems with design engineers, operating personnel (from top supervisors to the newest testers), academically-based engineers, engineers of the manufacturers of flow meter equipment, worldwide practitioners, theorists, and people just getting into the business. - The authors' many years of experience are brought to bear in a thorough review of fluid flow measurement methods and applications - Avoids theory and focuses on presentation of practical data for the novice and veteran engineer - Useful for a wide range of engineers and technicians (as well as students) in a wide range of industries and applications
Download or read book Flow Measurement in Open Channels and Closed Conduits written by Lafayette K. Irwin and published by . This book was released on 1977 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Velocimetry in Fluid Mechanics written by Alain Boutier and published by John Wiley & Sons. This book was released on 2013-01-09 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: In fluid mechanics, velocity measurement is fundamental in order to improve the behavior knowledge of the flow. Velocity maps help us to understand the mean flow structure and its fluctuations, in order to further validate codes. Laser velocimetry is an optical technique for velocity measurements; it is based on light scattering by tiny particles assumed to follow the flow, which allows the local fluid flow velocity and its fluctuations to be determined. It is a widely used non-intrusive technique to measure velocities in fluid flows, either locally or in a map. This book presents the various techniques of laser velocimetry, as well as their specific qualities: local measurements or in plane maps, mean or instantaneous values, 3D measurements. Flow seeding with particles is described with currently used products, as well as the appropriate aerosol generators. Post-processing of data allows us to extract synthetic information from measurements and to perform comparisons with results issued from CFD codes. The principles and characteristics of the different available techniques, all based on the scattering of light by tiny particles embedded in the flow, are described in detail; showing how they deliver different information, either locally or in a map, mean values and turbulence characteristics.
Download or read book Particle Image Velocimetry written by Ronald J. Adrian and published by Cambridge University Press. This book was released on 2011 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle image velocimetry, or PIV, refers to a class of methods used in experimental fluid mechanics to determine instantaneous fields of the vector velocity by measuring the displacements of numerous fine particles that accurately follow the motion of the fluid. Although the concept of measuring particle displacements is simple in essence, the factors that need to be addressed to design and implement PIV systems that achieve reliable, accurate, and fast measurements and to interpret the results are surprisingly numerous. The aim of this book is to analyze and explain them comprehensively.
Download or read book Fluid Mechanics Measurements written by R. Goldstein and published by Routledge. This book was released on 2017-11-13 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition provides updated fluid mechanics measurement techniques as well as a comprehensive review of flow properties required for research, development, and application. Fluid-mechanics measurements in wind tunnel studies, aeroacoustics, and turbulent mixing layers, the theory of fluid mechanics, the application of the laws of fluid mechanics to measurement techniques, techniques of thermal anemometry, laser velocimetry, volume flow measurement techniques, and fluid mechanics measurement in non-Newtonian fluids, and various other techniques are discussed.
Download or read book Optical Diagnostics for Flow Processes written by P. Buchhave and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: The origin of optical methods for fluid flow investigations appears to be nontraceable. This is no matter for surprise. After all seeing provides the most direct and common way for humans to learn about their environment. But at the same time some of the most sophisticated methods for doing measurements in fluids are also based on light and often laser light. A very large amount of material has been published in this area over the last two decades. Why then another publication? Well, the field is still in a state of rapid development. It is characterised by the use of results and methods developed within very different areas like optical physics, spectroscopy, communication systems, electronics and computer science, mechanical engineering, chemical engineering and, of course, fluid dynamics. We are not aware of a book containing both introductory and more advanced material that covers the same material as presented here. The book is the result of a compilation and expansion of material presented at a summer school on Optical Diagnosticsfor Flow Processes,held at RiS0 National Laboratory and the Technical University of Denmark in September 1993. The aim of the course was to provide a solid background for understanding, evaluating, and using modem optical diagnostic methods, addressing Ph. D. students and researchers active in areas of fluid flow research. The disciplines represented by the participants ranged from atmospheric fluid dynamics to biomedicine.
Download or read book Flow Measurement in Open Channels and Closed Conduits written by and published by . This book was released on 1977 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Turbulence Modelling and Experiments 4 written by D. Laurence and published by Elsevier. This book was released on 1999-04-14 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain the papers presented at the 4th International Symposium on Engineering Turbulence Modelling and Measurements held at Ajaccio, Corsica, France from 24-26 May 1999. It follows three previous conferences on the topic of engineering turbulence modelling and measurements. The purpose of this series of symposia is to provide a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. Turbulence is still one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends more and more on the performance of the turbulence models. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation.
Download or read book Application of Laser Doppler Velocimeter to Chemical Vapor Laser System written by Luther R. Gartrell and published by . This book was released on 1993 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulence Measurements with a Laser Doppler Velocimeter written by William J. Yanta and published by . This book was released on 1973 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence measurements with a Laser Doppler Velocimeter (LDV) using the dual scatter or differential Doppler mode have been made in a subsonic, fully developed channel flow. The measurements were made using only those light scattering particles occurring naturally in air. Results include mean velocity profiles, turbulence intensities, Reynolds stress distributions and a skewness measurement of the velocity distribution function across the channel. Statistical techniques were used to obtain the various turbulence parameters. Guidelines have been established for the amount of data needed to obtain results with a specified accuracy and confidence level. Measurements have also been made to determine the particle-size distribution. An aerodynamic means was used to determine the size distribution, in contrast to the usual optical procedures. (Modified author abstract).
