Download or read book The Synthesis and Characterization of Styrene grafted Epoxidized Natural Rubber ENR50 PS by Gradient HPLC Analysis written by Andries Jakobus Petrus Van Zyl and published by . This book was released on 1999 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.
Download or read book Spectroscopy of Rubbers and Rubbery Materials written by Victor M. Litvinov and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the application of spectroscopic techniques for characterisation of chemical and physical structures in viscoelastic materials, such as unvulcanised elastomers and their vulcanisates, various rubbery materials and some plastics, which when blended with particular additives (plasticisers) behave like rubbers. Analysis of the rubbery materials is complicated by the fact that rubbery products, such as tyres, tubes, seals, V-belts and hoses, contain in the rubbery matrix a significant amount of various compounds, i.e., fillers, vulcanising agents, antioxidants and plasticisers. Due to the complex composition, no single technique can provide a good understanding of the effect of chemical and physical structures on the functional properties of rubbery materials. Thus spectroscopy has become a powerful tool for the determination of polymer structures. The most comprehensive information on chemical and physical structures in relation to material properties can be obtained by using a combination of macroscopic techniques and methods that provide information on the molecular level. frequently used for analysis of rubbery materials, i.e., various methods of nuclear magnetic resonance (NMR) and optical spectroscopy. The main objective of this present book is to discuss a wide range of applications of the spectroscopic techniques for the analysis of rubbery materials. The book brings together the various spectroscopic techniques for obtaining the following information: chemical structure of rubbery materials, network structure analysis, heterogeneity of rubbery materials, physical properties of rubbery materials, functional properties and stability of rubbery materials, processing of rubbery materials and quality control. The contents of this book are of interest to chemists, physicists, material scientists and technologists who seek a better understanding of rubbery materials.
Download or read book Biodegradable Matrices and Composites written by Alessandro Pegoretti and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eBook is a collection of articles from a Frontiers Research Topic. Frontiers Research Topics are very popular trademarks of the Frontiers Journals Series: they are collections of at least ten articles, all centered on a particular subject. With their unique mix of varied contributions from Original Research to Review Articles, Frontiers Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author by contacting the Frontiers Editorial Office: frontiersin.org/about/contact.
Download or read book Crown Ethers and Phase Transfer Catalysis in Polymer Science written by Lon Mathias and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase transfer catalysis or interfacial catalysis is a syn thetic technique involving transport of an organic or inorganic salt from a solid or aqueous phase into an organic liquid where reaction with an organic-soluble substrate takes place. Over the past 15 years there has been an enormous amount of effort invested in the development of this technique in organic synthe sis. Several books and numerous review articles have appeared summarizing applications in which low molecular weight catalysts are employed. These generally include either crown ethers or onium salts of various kinds. While the term phase transfer catalysis is relatively new, the concept of using a phasetrans fer agent (PTA) is much older~ Both Schnell and Morgan employed such catalysts in synthesis of polymeric species in the early 1950's. Present developments are really extensions of these early applications. It has only been within the last several years that the use of phase transfer processes have been employed in polymer synthesis and modification. Similarly, the use of polymer-bound phase transfer agents is also a recent development. These and related areas have nonetheless enjoyed explosive growth as mea sured by the number of publications and the variety of applica tions which have appeared. Several reviews dealing with these l 6 polymer-related investigations have been published.
Download or read book Polymers from Plant Oils written by Alessandro Gandini and published by John Wiley & Sons. This book was released on 2018-11-16 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this monograph is to provide a thorough outlook on the topic related to the synthesis and characterization of original macromolecular materials derived from plant oils, an important part of the broader steadily growing discipline of polymers from renewable resources. The interest in vegetable oils as sources of biodiesel and materials has witnessed a remarkable growth of scientific and industrial interest since the beginning of the third millennium responding to the pressing drive to implement sustainability in the energy and materials sectors. The book highlights the most relevant strategies being pursued to elaborate polymers derived from a variety of common oils, by direct activation or through chemical modifications yielding novel monomers. Because glycerol is the main byproduct of biodiesel production, it is treated here as the other logical source of macromolecular synthesis. Each of the different approaches is illustrated by an introductory layout of the underlying chemical mechanisms, followed by examples of notable achievements in terms of the properties and potential applications of the ensuing materials, which span a wide range of structures and performances. In particular, original pathways involving click-chemistry reactions as thiol-ene and Diels-Alder couplings and metathesis polymerizations are discussed and shown to reflect the involvement of a growing number of research programs worldwide. It is important to underline that the book is not a scientific review covering the details of all relevant literature, but instead a reasoned and well-documented presentation of the state-of-the-art aimed at professionals in the field of polymer science, as well as at both undergraduate and graduate students and, more generally at chemists interested in the rational exploitation of renewable resources.
Download or read book High Performance Structural Material written by Yafang Han and published by . This book was released on 2015-01-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the Chinese Materials Congress 2014 (CMC 2014), July 4-7, 2014, Chengdu, China
Download or read book Graphite and Precursors written by Pierre Delhaes and published by CRC Press. This book was released on 2000-12-21 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humans first used carbon as chars from firewood in ritual paintings and primitive metallurgical processes. Natural forms of carbon have been known since antiquity, yet the knowledge of the carbon element in chemistry and its technical applications on a larger scale are a relatively recent development. The industrial revolution in Europe two centuries ago led the way to the numerous applications of these graphitic forms that are still used today. Graphite and Precursors features short tutorial articles on different topics related to the science and technology of carbons intended for engineers, students of Materials Science and scientists who are seeking a fundamental understanding without "reinventing the wheel." This first volume of the World of Carbon book series focuses on graphite and its precursors, including its origin and various implications. The basic properties of hexagonal graphite are developed, and several theoretical and experimental approaches explain why this crystalline solid is fascinating in solid state physics. Also featured are the numerous applications connected to thermal, mechanical and chemical graphites, as well as their various industrial uses in polycrystalline form. Finally, carbon precursors are introduced.
Download or read book Polymer Latices written by D.C. Blackley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Latices, Second Edition is a comprehensive update of the previous edition, High Polymer Latices, taking into account the many developments since it was first published in 1966. It is the only publication to provide such an outstanding and extensive review of latex science and technology, from background theory and principles, to modern day applications. It will prove an invaluable reference source for all those working in the area of latex science and technology, such as colloid chemists, polymer scientists, and materials processors.
Download or read book Natural Rubber written by M.R. Sethuraj and published by Elsevier. This book was released on 2012-12-02 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: No other book on natural rubber covers such a broad spectrum of subjects as this unique publication. Subjects related to the biology, cultivation and technology of natural rubber are dealt with, along with such important aspects as its history, production and processing, through to its sophisticated engineering applications. Every chapter follows a monograph style of presentation, with comprehensive citations and depth of treatment. Contributions from highly experienced, and still active, renowned scientists reflect the truly international effort to the development of this commodity. In addition to the wealth of information presented, most of the chapters contain elaborate lists of earlier contributions in the respective fields; one chapter each has been included on rubber wood, ancillary products and guayule.
Download or read book Synthetic Rubbers Their Chemistry and Technology written by D.C. Blackley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has its origin in a proposal made a few years ago that I should collaborate with Dr H. J. Stern in the production of a third edition of his well-known text-book entitled Rubber: Natural and Synthetic. The sugges tion was that I should contribute a series of chapters on synthetic rubbers. Although, in the event, it has not proved possible to publish the full book in the form originally planned, it was apparent that, with some restructuring, the material which I had collected would be valuable as an independent summary of the chemistry and technology of synthetic rubbers. It is in this form that the material is now offered. The primary purpose of this book is to provide a brief up-to-date survey of the principal types of synthetic rubber which have been and are currently available. Two classes of material are included which are regarded by some as being thermoplastics rather than rubbers, namely, plasticised polyvinyl chloride and the thermoplastic synthetic rubbers. The topics which are covered for each main family of synthetic rubbers are (i) the sources of the monomers, (ii) polymerisation procedures and the effects of important polymerisation variables upon the rubber produced, (iii) the types of rubber currently available commercially, (iv) interesting aspects of the compounding of the rubbers, with special reference to such matters as vulcanisation, reinforcement, protection against degradation, and (where appropriate) plasticisation, and (v) an indication of applications.
Download or read book Mixing and Compounding of Polymers written by Ica Manas-Zloczower and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2012-11-12 with total page 1184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finally available again in its second edition, this classic covers everything from the basic principles to the various practical applications of state-of-the-art mixing and compounding. Part I: Mechanisms and Theory Basic Concepts - Mixing of Miscible Fluids - Mixing of Immiscible Fluids - Dispersive Mixing of Solid Additives - Distributive Mixing - Distribution Functions and Measures of Mixing Part II: Mixing Equipment - Modeling, Simulation, Visualization Batch Equipment Simulation - Batch Equipment Visualization - Continuous Equipment Simulation - Dispersive Mixing Devices in Single Screw - Twin Rotor Mixers - Co-Kneader - Visualization - Scale-up of Mixing Equipment - Scale-down of Mixing Equipment Part III Material Consideration, Properties and Characterization Solid additives (inorganic) - Solid additives (organic) - Compatibilizers (mechanisms, theory) - Material Consideration for Mixing at Nanoscale - Effect of Mixing on Properties of Compounds - Effect of Mixing on Rubber Properties Part IV Mixing Practices Internal Mixers - Single Screw Extruders - Twin Screw Extruders - Intermeshing Twin Screw Extruders - Reciprocating Screws - Reactive Compounding - Farrel Continuous Mixer
Download or read book International Collaborative Fire Modeling Project ICFMP written by Marina Röwekamp and published by . This book was released on 2008 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combined Quantum Mechanical and Molecular Mechanical Methods written by Jiali Gao and published by . This book was released on 1998 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined quantum mechanical and molecular mechanical methods (QM/MM) is one of the most promising approaches for quantum mechanical calculations of chemical processes in solution and in enzymes. This book provides an in-depth survey of the methods and applications of these combined techniques in chemistry and biochemistry.
Download or read book Rubber Science written by Yuko Ikeda and published by Springer Nature. This book was released on with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stochastic Flows and Stochastic Differential Equations written by Hiroshi Kunita and published by Cambridge University Press. This book was released on 1990 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main purpose of this book is to give a systematic treatment of the theory of stochastic differential equations and stochastic flow of diffeomorphisms, and through the former to study the properties of stochastic flows.The classical theory was initiated by K. Itô and since then has been much developed. Professor Kunita's approach here is to regard the stochastic differential equation as a dynamical system driven by a random vector field, including thereby Itô's theory as a special case. The book can be used with advanced courses on probability theory or for self-study.
Download or read book Rubber Technology and Manufacture written by Claude M. Blow and published by Institution of Rubber Industry. This book was released on 1971 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
