Download or read book Solidification and Crystallization Processing in Metals and Alloys written by Hasse Fredriksson and published by John Wiley & Sons. This book was released on 2012-07-02 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solidification and Crystallization Processing in Metals and Alloys Hasse Fredriksson KTH, Royal Institute of Technology, Stockholm, Sweden Ulla Åkerlind University of Stockholm, Sweden Solidification or crystallization occurs when atoms are transformed from the disordered liquid state to the more ordered solid state, and is fundamental to metals processing. Conceived as a companion volume to the earlier works, Materials Processing during Casting (2006) and Physics of Functional Materials (2008), this book analyzes solidification and crystallization processes in depth. Starting from the thermodynamic point of view, it gives a complete description, taking into account kinetics and mass transfer, down to the final structure. Importantly, the book shows the relationship between the theory and the experimental results. Topics covered include: Fundamentals of thermodynamics Properties of interfaces Nucleation Crystal growth - in vapours, liquids and melts Heat transport during solidification processes Solidification structures - faceted, dendritic, eutectic and peritectic Metallic glasses and amorphous alloy melts Solidification and Crystallization Processing in Metals and Alloys features many solved examples in the text, and exercises (with answers) for students. Intended for Masters and PhD students as well as researchers in Materials Science, Engineering, Chemistry and Metallurgy, it is also a valuable resource for engineers in industry.
Download or read book Rapid Solidification of Metals and Alloys written by Howard Jones and published by Ashgate Publishing. This book was released on 1983 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Theory of Transformations in Metals and Alloys written by John Christian and published by Newnes. This book was released on 2002-12-10 with total page 1202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.
Download or read book The Solidification of Metals and Alloys written by American Institute Of Mining and published by . This book was released on 2013-08 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additional Contributors Include J. H. Hollomon, D. Turnbull, Robert F. Mehl, B. R. Queneau, And Others.
Download or read book Transport Phenomena in Materials Processing written by David R. Poirier and published by Springer. This book was released on 2016-12-06 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides a teachable and readable approach to transport phenomena (momentum, heat, and mass transport) by providing numerous examples and applications, which are particularly important to metallurgical, ceramic, and materials engineers. Because the authors feel that it is important for students and practicing engineers to visualize the physical situations, they have attempted to lead the reader through the development and solution of the relevant differential equations by applying the familiar principles of conservation to numerous situations and by including many worked examples in each chapter. The book is organized in a manner characteristic of other texts in transport phenomena. Section I deals with the properties and mechanics of fluid motion; Section II with thermal properties and heat transfer; and Section III with diffusion and mass transfer. The authors depart from tradition by building on a presumed understanding of the relationships between the structure and properties of matter, particularly in the chapters devoted to the transport properties (viscosity, thermal conductivity, and the diffusion coefficients). In addition, generous portions of the text, numerous examples, and many problems at the ends of the chapters apply transport phenomena to materials processing.
Download or read book The Solidification of Metals and Alloys written by American Institute of Mining and Metallurgical Engineers. Institute of Metals Division and published by . This book was released on 1951 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Engineering of Casting Solidification written by Doru Michael Stefanescu and published by Springer. This book was released on 2015-08-27 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this popular textbook covers current topics in all areas of casting solidification. Partial differential equations and numerical analysis are used extensively throughout the text, with numerous calculation examples, to help the reader in achieving a working knowledge of computational solidification modeling. The features of this new edition include: • new chapters on semi-solid and metal matrix composites solidification • a significantly extended treatment of multiscale modeling of solidification and its applications to commercial alloys • a survey of new topics such as solidification of multicomponent alloys and molecular dynamic modeling • new theories, including a theory on oxide bi-films in the treatment of shrinkage problems • an in-depth treatment of the theoretical aspects of the solidification of the most important commercial alloys including steel, cast iron, aluminum-silicon eutectics, and superalloys • updated tables of material constants.
Download or read book Phase Transformations in Metals and Alloys Third Edition Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 1992-09-10 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade since the first edition of this popular text was published, the metallurgical field has undergone rapid developments in many sectors. Nonetheless, the underlying principles governing these developments remain the same. A textbook that presents these advances within the context of the fundamentals is greatly needed by instructors in the field Phase Transformations in Metals and Alloys, Second Edition maintains the simplicity that undergraduate instructors and students have come to appreciate while updating and expanding coverage of recently developed methods and materials. The book is effectively divided into two parts. The beginning chapters contain the background material necessary for understanding phase transformations - thermodynamics, kinetics, diffusion theory and the structure and properties of interfaces. The following chapters deal with specific transformations - solidification, diffusional transformation in solids and diffusionless transformation. Case studies of engineering alloys are incorporated to provide a link between theory and practice. New additions include an extended list of further reading at the end of each chapter and a section containing complete solutions to all exercises in the book Designed for final year undergraduate and postgraduate students of metallurgy, materials science, or engineering materials, this is an ideal textbook for both students and instructors.
Download or read book Concepts in Physical Metallurgy written by Lavakumar Avala and published by Morgan & Claypool Publishers. This book was released on 2017-05-02 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progress of civilization can be, in part, attributed to their ability to employ metallurgy. This book is an introduction to multiple facets of physical metallurgy, materials science, and engineering. As all metals are crystalline in structure, it focuses attention on these structures and how the formation of these crystals are responsible for certain aspects of the material's chemical and physical behaviour. Concepts in Physical Metallurgy also discusses the mechanical properties of metals, the theory of alloys, and physical metallurgy of ferrous and non-ferrous alloys.
Download or read book The Solidification of Metals written by Iron and Steel Institute and published by . This book was released on 1968 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Solidification of Metals and Alloys written by and published by . This book was released on 1951 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solidification of Metals and Alloys written by Hrushikesh Sarangi and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to analyse the process of solidification of metals and alloys critically, it is most pertinent to understand the different modes of nucleation and the uneven rates of growth throughout the melt. It is also important to take a note of the constraints in the growth process that definitely influence the crystal structure and the structure related properties of the casting. The freezing pattern of the liquid melt decides the feeding of the mould which is instrumental in producing a complete and compact casting. For pure metals and even in case of alloys with a narrow freezing range a well defined solid,Äìliquid macro-interface exists. Here feeding of the solidifying casting is the easiest, by the common lowering of the liquid metal surface in the mould. However, in many instances, a well defined interface is not witnessed. The solid,Äìliquid interface could be discrete and not continuous. Here process of feeding the solidification sites that witness considerable shrinkages, may become complicated. On grounds of above it is implied, the process of solidification constitutes an important aspects in the production of a defect free casting.
Download or read book Solidification written by Michel Rappaz and published by EPFL Press. This book was released on 2009-08-21 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solidification is one of the oldest processes for producing useful implements and remains one of the most important modern commercial processes. This text describes the fundamentals of the technology in a coherent way, using consistent notation.
Download or read book Rapidly Solidified Alloys written by Liebermann and published by CRC Press. This book was released on 1993-05-20 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume details the principles underlying rapid solidification processing, material structure and properties, and their applications. This practical resource presents a manifold approach to both amorphous and crystalline rapidly solidified metallic alloys.;Written by over 30 internationally acclaimed specialists in their respective fields, Rapidly Solidified Alloys: surveys nucleation and growth studies in undercooled melts; examines various processes for the production of rapidly solidified alloys; discusses the compaction of amorphous alloys; describes surface remelting treatments for the rapid solidification of surface layers and the resultant improved workpiece properties; covers the closely related topics of structural relaxation, atomic transport and other thermally induced processes; demonstrates microstructure-property relationships in rapidly quenched crystalline alloy systems and their beneficial effects in applications; and elucidates the basic, engineeering, and applications-oriented magnetic properties of amorphous alloys.;Furnishing more than 2300 literature citations for further study of specific subjects, Rapidly Solidified Alloys is intended for materials, mechanical, product, and civil engineers; metallurgists; magneticians; physicists; physical chemists; and graduate students in these disciplines.
Download or read book Solidification and Crystallization written by Dieter M. Herlach and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current interest in research of solidification of melts is focussed to understand crystal nucleation and crystal growth. They determine the solidified product with its physical properties. A detailed description of these processes lead to the development and validation of physical models, which may form the basis of quantitative modelling of solidification routes in e.g. casting and foundry processes in order to develop a predictive capability in the design of materials during solidification. This book, based on a symposium held at EUROMAT 2003 aims to gives an overview on current developments in the research of solidification and crystallisation of liquids. The materials of interest range from metals and their alloys over semiconductors and isolators to organic substances.
Download or read book Solidification and Casting written by Brian Cantor and published by CRC Press. This book was released on 2016-04-19 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading experts in their respective fields, Solidification and Casting provides a comprehensive review of topics fundamental to metallurgy and materials science as well as indicates recent trends. From an industrial perspective, the book begins with chapters on the casting techniques most commonly used in industry today. It then d
Download or read book Casting Processes and Modelling of Metallic Materials written by Zak Abdallah and published by BoD – Books on Demand. This book was released on 2021-02-24 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Casting Processes and Modelling of Metallic Materials, explores the various casting and modelling activities related to metallic alloy systems. The book provides results of research work conducted by experts from all over the globe to add to the research community in the era of the casting process and modelling. The book was edited by two experts in the field of materials science and modelling, Dr. Abdallah and Dr. Aldoumani, whom both have several publications in peer-reviewed journals, worldwide conferences, and scientific books. The book introduces the casting processes and then discusses the various issues and possible solutions. Over the past years, various models have been proposed and utilized to predict the performance of castings. Some of these models proved to be accurate whereas others failed to predict the casting performance. The strength of any predictive tool depends on the employment of physically meaningful parameters that replicate the real-life conditions. This has been illustrated in the current book with such predictive models and finite element (FE) modelling to illustrate the behaviour of castings in real-life conditions.
