Download or read book The SMP Concept Based 3D Constitutive Models for Geomaterials written by Hajime Matsuoka and published by CRC Press. This book was released on 2014-04-21 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cam-Clay model is a fundamental constitutive model in soil mechanics, but is only suitable for normally consolidated clay under triaxial compression stress states. This book introduces the SMP criterion, its integration with the well-known Cam-clay model, and its application to the general eleastoplastic constitutive models for geomaterials like clay, sand and unsaturated soil.
Download or read book American Book Publishing Record written by and published by . This book was released on 2006 with total page 1206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geomechanics and Geotechnics written by Mingjing Jiang and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soils are composed of grains but they are generally treated as continua in the classical framework of geomechanics. Their macroscopic response under loading, such as their non-linearity, yielding and anisotropy, is controlled by their micro-structure, the characteristics of the grains and the disposition of contacts between them. There have been rapid advances in technology both to investigate the microscopic properties of soils, and to simulate their granular behaviour explicitly through Discrete Element Method (DEM). DEM was originally used to ...
Download or read book Practice of Constitutive Modelling for Saturated Soils written by Zhen-Yu Yin and published by Springer Nature. This book was released on 2020-09-11 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development of a constitutive modeling platform for soil testing, which is one of the key components in geomechanics and geotechnics. It discusses the fundamentals of the constitutive modeling of soils and illustrates the use of these models to simulate various laboratory tests. To help readers understand the fundamentals and modeling of soil behaviors, it first introduces the general stress–strain relationship of soils and the principles and modeling approaches of various laboratory tests, before examining the ideas and formulations of constitutive models of soils. Moving on to the application of constitutive models, it presents a modeling platform with a practical, simple interface, which includes various kinds of tests and constitutive models ranging from clay to sand, that is used for simulating most kinds of laboratory tests. The book is intended for undergraduate and graduate-level teaching in soil mechanics and geotechnical engineering and other related engineering specialties. Thanks to the inclusion of real-world applications, it is also of use to industry practitioners, opening the door to advanced courses on modeling within the industrial engineering and operations research fields.
Download or read book Principles of Polymer Engineering written by N. G. McCrum and published by . This book was released on 1997 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers have an important role in manufacturing and their engineering properties form an important part of any course in engineering. This revised and updated second edition develops the principles of polymer engineering from the underlying materials science, and is aimed at undergraduateand postgraduate students in engineering and materials science. The opening chapters explain why plastics and rubbers have such distinctive properties and how these are affected by temperature, strain rate, and other factors. The book then explores how these properties can be exploited within theseproperty constraints to produce functional components. Major changes for this second edition include an introductory chapter on the environmental impact of polymers, emphasizing the important issues, and substantially revised sections on fracture testing for toughened polymers, yield, processing,heat transfer, and polymer forming.
Download or read book Recent Developments of Soil Mechanics and Geotechnics in Theory and Practice written by Theodoros Triantafyllidis and published by Springer Nature. This book was released on 2019-08-20 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides essential insights into recent developments in fundamental geotechnical engineering research. Special emphasis is given to a new family of constitutive soil description methods, which take into account the recent loading history and the dilatancy effects. Particular attention is also paid to the numerical implementation of multi-phase material under dynamic loads, and to geotechnical installation processes. In turn, the book addresses implementation problems concerning large deformations in soils during piling operations or densification processes, and discusses the limitations of the respective methods. Numerical simulations of dynamic consolidation processes are presented in slope stability analysis under seismic excitation. Lastly, achieving the energy transition from conventional to renewable sources will call for geotechnical expertise. Consequently, the book explores and analyzes a selection of interesting problems involving the stability and serviceability of supporting structures, and provides new solutions approaches for practitioners and scientists in geotechnical engineering. The content reflects the outcomes of the Colloquium on Geotechnical Engineering 2019 (Geotechnik Kolloquium), held in Karlsruhe, Germany in September 2019.
Download or read book The Material Point Method for Geotechnical Engineering written by James Fern and published by CRC Press. This book was released on 2019-01-30 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide provides the best introduction to large deformation material point method (MPM) simulations for geotechnical engineering. It provides the basic theory, discusses the different numerical features used in large deformation simulations, and presents a number of applications -- providing references, examples and guidance when using MPM for practical applications. MPM covers problems in static and dynamic situations within a common framework. It also opens new frontiers in geotechnical modelling and numerical analysis. It represents a powerful tool for exploring large deformation behaviours of soils, structures and fluids, and their interactions, such as internal and external erosion, and post-liquefaction analysis; for instance the post-failure liquid-like behaviours of landslides, penetration problems such as CPT and pile installation, and scouring problems related to underwater pipelines. In the recent years, MPM has developed enough for its practical use in industry, apart from the increasing interest in the academic world.
Download or read book Advances in Computer Methods and Geomechanics written by Amit Prashant and published by Springer Nature. This book was released on 2020-01-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents selected papers from IACMAG Symposium,The major themes covered in this conference are Earthquake Engineering, Ground Improvement and Constitutive Modelling. This volume will be of interest to researchers and practitioners in geotechnical and geomechanical engineering.
Download or read book Small strain Stiffness of Soils and Its Numerical Consequences written by Thomas Benz and published by . This book was released on 2007 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Constitutive Equations for Concrete and Soil written by Huifa Chen and published by . This book was released on 2005 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for the Use of Advanced Numerical Analysis written by David Potts and published by Thomas Telford. This book was released on 2002 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is not easy for engineers to gain all the skills necessary to perform numerical analysis. This book is an authoritative guide that explains in detail the potential restrictions and pitfalls and so help engineers undertake advanced numerical analysis. It discusses the major approximations involved in nonlinear numerical analysis and describes some of the more popular constituitive models currently available and explores their strengths and weaknesses. It also discusses the determination of material parameters for defining soil behaviour, investigates the options for modelling structural components and their interface with the soil and the boundary conditions that are appropriate in geotechnical analysis and the assumptions implied when they are used. Guidelines for the use of Advanced Numerical Analysis also provides guidelines for best practice of specific types of soil-structure interaction that are common in urban development and discusses the role of benchmarking exercises. This authoritative book will be invaluable to practising engineers involved in urban development. It will also be useful tool for geotechnical and structural engineers.
Download or read book Frontiers in Offshore Geotechnics III written by Vaughan Meyer and published by CRC Press. This book was released on 2015-05-15 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Offshore Geotechnics III comprises the contributions presented at the Third International Symposium on Frontiers in Offshore Geotechnics (ISFOG, Oslo, Norway, 10-12 June 2015), organised by the Norwegian Geotechnical Institute (NGI). The papers address current and emerging geotechnical engineering challenges facing those working in off
Download or read book Unified Strength Theory and Its Applications written by Mao-Hong Yu and published by Springer Science & Business Media. This book was released on 2004-01-08 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been ten years since I presented the paper entitled “A new model and theory on yield and failure of materials under the complex stress state” at the Sixth Conference on Mechanical Behaviour of Materials held at Kyoto, Japan in 1991. The proceedings edited by Jono and Inoue were published by Pergamon Press in 1991. At that conference Professor Murakami and I were invited to act as the chairperson and co-chairperson of a session, and I presented the paper at another session. Few days before the conference, I had given a seminar regarding the tw- shear strength theory and the unified strength theory at Nagoya Technological University. These were the first two presentations of the unified strength theory, although I had completed the research of the unified strength theory in 1990. The paper “Twin-shear strength theory and its generalization” was published in the English edition of Sciences in China, the top journal in China, in 1985. The th original generalized twin-shear strength theory was presented at the 16 International Theoretical and Applied Mechanics Congress held at Copenhagen in Denmark and MPA (MaterialPrüfungsAnstalt) at Stuttgart University, Germany in 1984. After this Congress I visited the MPA and School of Civil Engineering of Stuttgart University, and gave a seminar regarding the generalized twin-shear strength theory at MPA of Stuttgart University. Professor Otto Mohr (1835–1918) has had worked at the Stuttgart University. He was a very good professor, his lectures aroused great interest in his students.
Download or read book Plasticity and Geotechnics written by Hai-Sui Yu and published by Springer Science & Business Media. This book was released on 2007-01-11 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity and Geotechnics is the first attempt to summarize and present in a single volume the major achievements in the field of plasticity theory for geotechnical materials and its applications to geotechnical analysis and design. The book emerges from the author’s belief that there is an urgent need for the geotechnical and solid mechanics community to have a unified presentation of plasticity theory and its application to geotechnical engineering.
Download or read book Compression and Consolidation of Clayey Soils written by Hiroshi Yoshikuni and published by . This book was released on 1995 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cavity Expansion Methods in Geomechanics written by Hai-Sui Yu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cavity expansion theory is a simple theory that has found many applications in geotechnical engineering. In particular, it has been used widely to analyse problems relating to deep foundations, in-situ testing, underground excavation and tunnelling, and wellbore instability. Although much research has been carried out in this field, all the major findings are reported in the form of reports and articles published in technical journals and conference proceedings. To facilitate applications and further development of cavity expansion theory, there is a need for the geotechnical community to have a single volume presentation of cavity expansion theory and its applications in solid and rock mechanics. This book is the first attempt to summarize and present, in one volume, the major developments achieved to date in the field of cavity expansion theory and its applications in geomechanics. Audience: Although it is intended primarily as a reference book for civil, mining, and petroleum engineers who are interested in cavity expansion methods, the solutions presented in the book will also be of interest to students and researchers in the fields of applied mechanics and mechanical engineering.
Download or read book Self Healing Construction Materials written by Antonios Kanellopoulos and published by Springer Nature. This book was released on 2021-12-08 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough overview of all techniques for producing self-healing construction materials. Construction materials (cement-based, bituminous, metals, and alloys) are prone to cracking, which with the progress of time can lead to compromising of the structural integrity of critical infrastructure. Self-healing materials form a new class of materials that have inbuilt engineered properties to counteract damage and repair it before it becomes critical. The methods for monitoring, modeling, and assessing self-healing are also reviewed. The final section of the book discusses the future outlook and potential extension of self-healing concepts to other materials (e.g., heritage structures and soils).
