Download or read book Wood Properties and Processing written by Miha Humar and published by MDPI. This book was released on 2020-05-23 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood-based materials are CO2-neutral, renewable, and considered to be environmentally friendly. The huge variety of wood species and wood-based composites allows a wide scope of creative and esthetic alternatives to materials with higher environmental impacts during production, use and disposal. Quality of wood is influenced by the genetic and environmental factors. One of the emerging uses of wood are building and construction applications. Modern building and construction practices would not be possible without use of wood or wood-based composites. The use of composites enables using wood of lower quality for the production of materials with engineered properties for specific target applications. Even more, the utilization of such reinforcing particles as carbon nanotubes and nanocellulose enables development of a new generation of composites with even better properties. The positive aspect of decomposability of waste wood can turn into the opposite when wood or wood-based materials are exposed to weathering, moisture oscillations, different discolorations, and degrading organisms. Protective measures are therefore unavoidable for many outdoor applications. Resistance of wood against different aging factors is always a combined effect of toxic or inhibiting ingredients on the one hand, and of structural, anatomical, or chemical ways of excluding moisture on the other.
Download or read book The Properties and Uses of Wood written by Arthur Koehler and published by . This book was released on 1924 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood written by Lorenzo F. Botannini and published by Nova Science Publishers. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood is the most accessible and renewable material used by humankind during its history. Today, the consumption of wood exceeds all other known materials. The industry of various products made of wood grows continuously. This book reviews research on hydrothermal treatment and modification of wood in the drying and impregnation process; the decomposition of coarse woody debris as an important component of the carbon cycle and biodivesity of forest ecosystems; and the potential of agroforestry as a carbon sequestration strategy. Also discussed is the importance of fossil woods, types of preservation, and their significance in reconstructing the palaeo-climatology and paleo-environment of a region as well as the limitation in identifying the fossil woods.
Download or read book The Properties and Uses of Wood written by Arthur Koehler and published by . This book was released on 1924 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to the Properties and Uses of Southern African Wood written by Stephanie Dyer and published by . This book was released on 2016-09 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Guide to the properties and uses of Southern African Wood is a fully illustrated, scientifically accurate guide to the characteristics, properties and uses of wood from 140 Southern African tree species. Species treatments include information on conservation status, uses, mechanical properties, durability, identification features, woodworking properties and comments from wood users on workability. Photographs of tree bark, untreated and treated wood, end-grain macrographs, as well as worked items. Provides information on historical uses, where trees grow, availability and sustainability of the woods and the practicalities of harvesting and processing. Superior quality text and excellent reproduction and printing. The only commercially available book which focuses on the properties of Southern African wood, written in a style that will appeal to a wide audience: professional woodworkers, designers, architects, wood dealers and wood collectors, hobbyists, botanists and anyone interested in trees and wood. A must-have for all who love wood and trees!"--Publisher.
Download or read book The properties and uses of wood prepared in the Extension division written by Arthur Koehler and published by . This book was released on 1924 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Age of Wood written by Roland Ennos and published by Simon and Schuster. This book was released on 2020-12-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: A “smart and surprising” (Booklist) “expansive history” (Publishers Weekly) detailing the role that wood and trees have played in our global ecosystem—including human evolution and the rise and fall of empires—in the bestselling tradition of Yuval Harari’s Sapiens and Mark Kurlansky’s Salt. As the dominant species on Earth, humans have made astonishing progress since our ancestors came down from the trees. But how did the descendants of small primates manage to walk upright, become top predators, and populate the world? How were humans able to develop civilizations and produce a globalized economy? Now, in The Age of Wood, Roland Ennos shows for the first time that the key to our success has been our relationship with wood. “A lively history of biology, mechanics, and culture that stretches back 60 million years” (Nature) The Age of Wood reinterprets human history and shows how our ability to exploit wood’s unique properties has profoundly shaped our bodies and minds, societies, and lives. Ennos takes us on a sweeping journey from Southeast Asia and West Africa where great apes swing among the trees, build nests, and fashion tools; to East Africa where hunter gatherers collected their food; to the structural design of wooden temples in China and Japan; and to Northern England, where archaeologists trace how coal enabled humans to build an industrial world. Addressing the effects of industrialization—including the use of fossil fuels and other energy-intensive materials to replace timber—The Age of Wood not only shows the essential role that trees play in the history and evolution of human existence, but also argues that for the benefit of our planet we must return to more traditional ways of growing, using, and understanding trees. A brilliant blend of recent research and existing scientific knowledge, this is an “excellent, thorough history in an age of our increasingly fraught relationships with natural resources” (Kirkus Reviews, starred review).
Download or read book The Properties and Uses of Wood written by Arthur Koehler and published by Palala Press. This book was released on 2015-09-05 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Timber written by Filibert Roth and published by . This book was released on 1895 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: "I have the honor to transmit herewith for publication a brief but comprehensive discussion of the characteristics and properties of wood in general and of our American timbers in particular, which it is hoped may be useful to engineers, architects, carpenters, lumbermen, and all wood workers. The paper was prepared by Mr. Filibert Roth, in charge of the investigations in timber physics. Although much of the information contained in this bulletin exists in the experience of practical woodworkers and in books in other languages, it has never before been published in English is systematic and accessible form and with special application to American timbers. Such a publication can not, of course, exhaust any part of this great subject. It is desired that it may be followed by a more elaborate treatise when additional knowledge has been gained through the investigations now in progress. The information it contains is largely based on actual experiment and scientific observation, and will, it is hoped, not only explain the experiences of the practical worker with his material, but will remove erroneous notions, and thus aid in improving the practice and lead to a more rational use of our forest resources."--Letter of Transmittal, Page [i].
Download or read book The Properties and Uses of Wood written by Arthur Koehler and published by Palala Press. This book was released on 2018-02-20 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Wood as Raw Material written by George Tsoumis and published by Elsevier. This book was released on 2013-10-22 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood as Raw Material: Source, Structure, Chemical Composition, Growth, Degradation and Identification focuses on the scientific advancements in general forestry. This book discusses the value of wood as a raw material as looked upon from biological, botanical, and technical perspective. Organized into 12 chapters, this book starts with an overview of the importance of forest trees as sources of wood. This text then examines the chemical composition and ultrastructure of wood. Other chapters explain the biological mechanisms of wood and bark formation by forest trees. This book discusses as well the certain fundamental relationships between tree growth and wood structure. The final chapter deals with wood identification in North America and European forest tree species. This book is a valuable resource for students engaged in the study of forest management, wood science and technology, tree physiology, silviculture, forest soils, forest genetics, forest engineering, pulp and paper technology, forest and wood pathology, and other specialized areas. Foresters and technologists will also find this book useful.
Download or read book Textbook of Wood Technology Structure identification defects and uses of the commercial woods of the United States written by Harry Philip Brown and published by . This book was released on 1949 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: The plant origin of wood. The gross features of wood of value in identification. The woody plant cell. The minute structure of coniferous woods. The minute structure of porous woods. Variable quality of wood within a tree-species. Defects in wood. Natural durability of wood. The physical properties of wood. The mechanical properties of wood. The chemical properties of wood.
Download or read book Forest Products and Wood Science written by Rubin Shmulsky and published by John Wiley & Sons. This book was released on 2019-03-11 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The updated seventh edition of the classic text on wood science and forestry The seventh edition of Forest Products and Wood Science: An Introduction offers a fully revised and updated review of the forest products industry. This classic text contains a comprehensive review of the subject and presents a thorough understanding of the anatomical and physical nature of wood. The authors emphasize its use as an industrial raw material. Forest Products and Wood Science provides thorough coverage of all aspects of wood science and industry, ranging from tree growth and wood anatomy to a variety of economically important wood products, along with their applications and performance. The text explores global raw materials, the increasing use of wood as a source of energy and chemicals and environmental implications of the use of wood. This edition features new material on structural composites, non-structural composites, durability and protection, pulp and paper, energy and chemicals, and global raw materials. This seventh edition of the classic work: Contains new information on a variety of topics including: structural composites, non-structural composites, durability and protection, pulp and paper, energy and chemicals and global raw materials Includes a fully revised text that meets the changing needs of the forestry, engineering, and wood science academics and professionals Presents material written by authors with broad experience in both the private and academic sectors Written for undergraduate students in forestry, natural resources, engineering, and wood science, as well as forest industry personnel, engineers, wood-based manufacturing and using professionals, the seventh edition of Forest Products and Wood Science updates the classic text that has become an indispensable resource.
Download or read book Handbook of Wood Chemistry and Wood Composites written by Roger M. Rowell and published by CRC Press. This book was released on 2005-02-18 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The degradable nature of high-performance, wood-based materials is an attractive advantage when considering environmental factors such as sustainability, recycling, and energy/resource conservation. The Handbook of Wood Chemistry and Wood Composites provides an excellent guide to the latest concepts and technologies in wood chemistry and bio-based composites. The book analyzes the chemical composition and physical properties of wood cellulose and its response to natural processes of degradation. It describes safe and effective chemical modifications to strengthen wood against biological, chemical, and mechanical degradation without using toxic, leachable, or corrosive chemicals. Expert researchers provide insightful analyses of the types of chemical modifications applied to polymer cell walls in wood, emphasizing the mechanisms of reaction involved and resulting changes in performance properties. These include modifications that increase water repellency, fire retardancy, and resistance to ultraviolet light, heat, moisture, mold, and other biological organisms. The text also explores modifications that increase mechanical strength, such as lumen fill, monomer polymer penetration, and plasticization. The Handbook of Wood Chemistry and Wood Composites concludes with the latest applications, such as adhesives, geotextiles, and sorbents, and future trends in the use of wood-based composites in terms of sustainable agriculture, biodegradability and recycling, and economics. Incorporating over 30 years of teaching experience, the esteemed editor of this handbook is well-attuned to educational demands as well as industry standards and research trends.
Download or read book Wood written by Lorenzo F. Botannini and published by Nova Science Publishers. This book was released on 2011 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Importance of Wood and Timber in Sustainable Buildings written by Ali Sayigh and published by Springer Nature. This book was released on 2021-09-13 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasizes the important message that architects and structural engineers must strive to ensure that the buildings they design and construct should not be major contributors to climate change. Rather, they should be exploring the use of green materials and building methods – such as timber, wood, and associated materials – in order to safeguard the environment. These sustainable materials are not only environmentally friendly, but they have the added benefit of being easy to manufacture, cost effective, often locally available, and easily replenished. Moreover, it has been demonstrated that wood and timber are viable materials in the construction of a wide variety of building types, including medium and high-rise buildings. The Importance of Wood and Timber in Sustainable Buildings brings together a distinguished group of contributors from different cultures and building traditions to address why now is the time to rethink our construction methods and explore replacing many of the carbon intensive materials that are currently being used with wood and timber.
Download or read book Wood written by Terry Porter and published by GMC Publications. This book was released on 2012 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 200 timber species from around the world are described in detail in this lavishly illustrated, compact edition of Terry Porter's best-selling book. In this indispensable guide to one of the world's most valuable natural resources there are handsome colour photographs of each species, and reliable data on working properties, seasoning requirements, typical uses and safety considerations. Inspirational examples of finished work are also shown. A further 200 species are listed in brief, and there is a comprehensive index. Aimed squarely at the individual or small-scale user, whether professional or amateur, the book includes woods used in cabinetmaking, joinery, carpentry, turning, carving and a host of more specialist applications. It covers most species in widespread use, and many less familiar ones which deserve to be better known. This new compact edition of a best-selling reference work, includes the 20 important species added to the revised and expanded edition and a section illustrating the variety of decorative figuring which can be found in many species. There is also valuable information on wood defects and potential health hazards. Specially commissioned drawings of living trees, including details of their leaves, fruit and flowers, add a new dimension to the book and serve to enhance our appreciation of the raw material of woodwork.
