Download or read book The Precipitation of Alpha Phase in Metastable Beta Phase Titanium Alloys written by C. G. Rhodes and published by . This book was released on 1975 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes the results of a microstructural study of the crystallography, morphology and kinetics of formation of alpha-phase during decomposition of the metastable beta-phase in a Ti-Mo-Al ternary alloy and a Ti-Mo binary alloy.
Download or read book Study of Mechanisms for Fine Scale Alpha Phase in Beta Titanium Alloys written by Amit Kishan Behera and published by LAP Lambert Academic Publishing. This book was released on 2014-09-18 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present work focuses on a study of different mechanisms to engineer homogeneously distributed fine sized alpha precipitates in the beta matrix of beta titanium alloys. The precipitation of metastable phases (such as omega phase) upon low temperature aging and their influence on alpha precipitation is studied in detail. The precipitation sequence on direct aging above the omega solvus temperature is also assessed. The structural and compositional evolution of precipitate phase is determined using multiple characterization tools (3DAP, TEM, SEM, Synchrotron XRD). The possibility of occurrence of other non-classical precipitation mechanisms that do not require heterogeneous nucleation sites are also analyzed. Lastly, the influence of interstitial element, oxygen on alpha precipitation during the oxidation of Beta 21S has been determined. The ingress of oxygen and its influence on microstructure have also been correlated to measured mechanical properties.
Download or read book Theory of Structural Transformations in Solids written by Armen G. Khachaturyan and published by Courier Corporation. This book was released on 2013-12-01 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing both theoretical and practical aspects of phase transformation in alloys, this text formulates significant aspects of the quantitative metallurgy of phase transformations. It further applies solid-state theoretical concepts to structure problems arising in experimental studies of real alloys. Author Armen G. Khachaturyan, Professor of Materials Science at Rutgers University, ranks among the foremost authorities on this subject. In this volume, he takes a creative approach to examining change in atomic structure and morphology caused by ordering, strain-induced ordering, strain-controlled decomposition, and strain-induced coarsening. Unifying relationships among various fields of solid-state physics are stressed throughout the book. Topics include structure changes in two-phase alloys controlled by the phase transformation elastic strain, in addition to important results in the area of microscopic elasticity regarding problems of elastic interaction in impurity atoms, and strain-induced ordering and decomposition in interstitial solutions. An excellent text for advanced undergraduate and graduate courses in physical metallurgy, solid state physics, solid state chemistry, and materials science, this volume is also a valuable reference for professionals conducting research in phase transformations
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Phase Transformations written by Srikumar Banerjee and published by Elsevier. This book was released on 2010-05-31 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: The terms phase transitions and phase transformations are often used in an interchangeable manner in the metallurgical literature. In Phase Transformations, transformations driven by pressure changes, radiation and deformation and those occurring in nanoscale multilayers are brought to the fore. Order-disorder transformations, many of which constitute very good examples of continuous transformations, are dealt with in a comprehensive manner. Almost all types of phase transformations and reactions that are commonly encountered in inorganic materials are covered and the underlying thermodynamic, kinetic and crystallographic aspects elucidated. - Shows readers the advancements in the field - due to enhanced computing power and superior experimental capability - Drawing upon the background and the research experience of the authors, bringing together a wealth of experience - Written essentially from a physical metallurgists view point
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Beta Titanium Alloys in the 1990 s written by Daniel Eylon and published by Minerals, Metals, & Materials Society. This book was released on 1993 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beta titanium alloys are one of the most rapidly developing areas of materials technology. As a group, beta alloys provide a wider range of processing, physical, chemical and mechanical properties than any other titanium alloys.
Download or read book Deformation and Decomposition of Metastable B C C Titanium Alloys written by C. G. Rhodes and published by . This book was released on 1976 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of microstructure on mechanical properties of metastable beta titanium alloys was investigated, with emphasis on the influence of alpha-phase precipitation on tensile strength and ductility. A commercial alloy, Ti-3Al-8V-6Cr-4Mo-4Zr (Beta-C) has been aged to produce both Type 1 alpha (obeying the Burgers orientation relation) and 2 alpha (not obeying the Burgers relation) as hardening precipitates in the beta matrix. Although a direct comparison of Types 1 and 2 alpha could not be made, there did not seem to be any direct correlation between precipitate type and mechanical properties. Rather, it has been found that overaging to produce a coarse distribution of relatively large (>1000 A) non-coherent alpha precipitates provides the best combination of strength and ductility. The same strength can be achieved with much finer distribution of small (approximately 100-200 A) coherent alpha precipitates, but with much reduced ductility.
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Corrosion of Titanium written by J. D. Jackson and published by . This book was released on 1966 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. - Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy - Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. - Includes a critical review of the current key fundamental and technical issues of Ti PM. - Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys
Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 4024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.
Download or read book Mechanisms of Diffusional Phase Transformations in Metals and Alloys written by Hubert I. Aaronson and published by CRC Press. This book was released on 2016-04-19 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed by the late metallurgy professor and master experimentalist Hubert I. Aaronson, this collection of lecture notes details the fundamental principles of phase transformations in metals and alloys upon which steel and other metals industries are based. Mechanisms of Diffusional Phase Transformations in Metals and Alloys is devoted to solid-s
Download or read book Powder Metallurgy of Titanium written by Ma Qian and published by Trans Tech Publications Ltd. This book was released on 2012-08-24 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference upon which this work is based fully achieved its objectives and turned out to be the largest international gathering dedicated solely to the topic of titanium processing via powder metallurgy. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 50 peer-reviewed papers are grouped into 8 chapters: PM titanium alloy design and processing developments; Powder Production; Effect of Impurities; Metal Injection Moulding of Titanium; Biomedical Titanium Alloys; Titanium Composites; Forging and Equal-Channel Angular Pressing of Titanium; Laser Cladding, Welding, Slip Casting and Other Processing Developments.
Download or read book Microplasticity written by Charles J. McMahon and published by . This book was released on 1968 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
