Download or read book The Piezojunction Effect in Silicon Integrated Circuits and Sensors written by Fabiano Fruett and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes techniques that can reduce mechanical-stress-induced inaccuracy and long-term instability in chips. The authors also show that the piezojunction effect can be applied for new types of mechanical-sensor structures. Thermo-mechanical stress is induced when packaged chips cool down to the temperature of application.
Download or read book The Piezojunction Effect in Silicon Its Consequences and Applications for Integrated Circuits and Sensors written by F. Fruett and published by Delft University Press. This book was released on 2001-01-01 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Sensor Systems written by Gerard Meijer and published by John Wiley & Sons. This book was released on 2014-06-23 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from an internationally-renowned group of experts, this book uses a multidisciplinary approach to review recent developments in the field of smart sensor systems, covering important system and design aspects. It examines topics over the whole range of sensor technology from the theory and constraints of basic elements, physics and electronics, up to the level of application-orientated issues. Developed as a complementary volume to ‘Smart Sensor Systems’ (Wiley 2008), which introduces the basics of smart sensor systems, this volume focuses on emerging sensing technologies and applications, including: State-of-the-art techniques for designing smart sensors and smart sensor systems, including measurement techniques at system level, such as dynamic error correction, calibration, self-calibration and trimming. Circuit design for sensor systems, such as the design of precision instrumentation amplifiers. Impedance sensors, and the associated measurement techniques and electronics, that measure electrical characteristics to derive physical and biomedical parameters, such as blood viscosity or growth of micro-organisms. Complete sensor systems-on-a-chip, such as CMOS optical imagers and microarrays for DNA detection, and the associated circuit and micro-fabrication techniques. Vibratory gyroscopes and the associated electronics, employing mechanical and electrical signal amplification to enable low-power angular-rate sensing. Implantable smart sensors for neural interfacing in bio-medical applications. Smart combinations of energy harvesters and energy-storage devices for autonomous wireless sensors. Smart Sensor Systems: Emerging Technologies and Applications will greatly benefit final-year undergraduate and postgraduate students in the areas of electrical, mechanical and chemical engineering, and physics. Professional engineers and researchers in the microelectronics industry, including microsystem developers, will also find this a thorough and useful volume.
Download or read book Smart Sensors and MEMS written by S Nihtianov and published by Woodhead Publishing. This book was released on 2018-03-09 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Sensors and MEMS: Intelligent Devices and Microsystems for Industrial Applications, Second Edition highlights new, important developments in the field, including the latest on magnetic sensors, temperature sensors and microreaction chambers. The book outlines the industrial applications for smart sensors, covering direct interface circuits for sensors, capacitive sensors for displacement measurement in the sub-nanometer range, integrated inductive displacement sensors for harsh industrial environments, advanced silicon radiation detectors in the vacuum ultraviolet (VUV) and extreme ultraviolet (EUV) spectral range, among other topics. New sections include discussions on magnetic and temperature sensors and the industrial applications of smart micro-electro-mechanical systems (MEMS). The book is an invaluable reference for academics, materials scientists and electrical engineers working in the microelectronics, sensors and micromechanics industry. In addition, engineers looking for industrial sensing, monitoring and automation solutions will find this a comprehensive source of information. Contains new chapters that address key applications, such as magnetic sensors, microreaction chambers and temperature sensors Provides an in-depth information on a wide array of industrial applications for smart sensors and smart MEMS Presents the only book to discuss both smart sensors and MEMS for industrial applications
Download or read book Silicon Sensors and Circuits written by R.F. Wolffenbuttel and published by Springer Science & Business Media. This book was released on with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Efficient Smart Temperature Sensors in CMOS Technology written by Kamran Souri and published by Springer. This book was released on 2017-10-05 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the design and implementation of energy-efficient smart (digital output) temperature sensors in CMOS technology. To accomplish this, a new readout topology, namely the zoom-ADC, is presented. It combines a coarse SAR-ADC with a fine Sigma-Delta (SD) ADC. The digital result obtained from the coarse ADC is used to set the reference levels of the SD-ADC, thereby zooming its full-scale range into a small region around the input signal. This technique considerably reduces the SD-ADC’s full-scale range, and notably relaxes the number of clock cycles needed for a given resolution, as well as the DC-gain and swing of the loop-filter. Both conversion time and power-efficiency can be improved, which results in a substantial improvement in energy-efficiency. Two BJT-based sensor prototypes based on 1st-order and 2nd-order zoom-ADCs are presented. They both achieve inaccuracies of less than ±0.2°C over the military temperature range (-55°C to 125°C). A prototype capable of sensing temperatures up to 200°C is also presented. As an alternative to BJTs, sensors based on dynamic threshold MOSTs (DTMOSTs) are also presented. It is shown that DTMOSTs are capable of achieving low inaccuracy (±0.4°C over the military temperature range) as well as sub-1V operation, making them well suited for use in modern CMOS processes.
Download or read book Precision Temperature Sensors in CMOS Technology written by Micheal A.P. Pertijs and published by Springer Science & Business Media. This book was released on 2006-12-06 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the analysis and design of precision temperature sensors in CMOS IC technology, focusing on so-called smart temperature sensors, which provide a digital output signal that can be readily interpreted by a computer. The text shows how temperature characteristics can be used to obtain an accurate digital temperature reading. The book ends with a detailed description of three prototypes, one of which achieves the best performance reported to date.
Download or read book Microelectronics Technology and Devices SBMICRO 2004 written by Edval J. P. Santos and published by The Electrochemical Society. This book was released on 2004 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CMOS Integrated Analog to Digital and Digital to Analog Converters written by Rudy J. van de Plassche and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS Integrated Analog-to-Digital and Digital-to-Analog Converters describes in depth converter specifications like Effective Number of Bits (ENOB), Spurious Free Dynamic Range (SFDR), Integral Non-Linearity (INL), Differential Non-Linearity (DNL) and sampling clock jitter requirements. Relations between these specifications and practical issues like matching of components and offset parameters of differential pairs are derived. CMOS Integrated Analog-to-Digital and Digital-to-Analog Converters describes the requirements of input and signal reconstruction filtering in case a converter is applied into a signal processing system. CMOS Integrated Analog-to-Digital and Digital-to-Analog Converters describes design details of high-speed A/D and D/A converters, high-resolution A/D and D/A converters, sample-and-hold amplifiers, voltage and current references, noise-shaping converters and sigma-delta converters, technology parameters and matching performance, comparators and limitations of comparators and finally testing of converters.
Download or read book High Data Rate Transmitter Circuits written by C.J. de Ranter and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide and introduction to the design of key RF building blocks used in high data rate transmitters emphasizes CMOS circuit techniques applicable to oscillators and upconvertors. The book is written in an easily accessible manner, without losing detail on the technical side.
Download or read book Circuit Design for Wireless Communications written by Kong-Pang Pun and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book focusing on the subject of image rejection in wireless receiver design, which is crucial for the current and next generation mobile terminals. It serves as a very useful reference for wireless design engineers, researchers and students.
Download or read book Microelectronics Technology and Devices SBMICRO 2002 written by Electrochemical Society. Electronics Division and published by The Electrochemical Society. This book was released on 2002 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mixed Signal Layout Generation Concepts written by Chieh Lin and published by Springer Science & Business Media. This book was released on 2005-12-17 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title covers important physical-design issues that exist in contemporary analogue and mixed-signal design flows. The authors bring together many principles and techniques required to successfully develop and implement layout generation tools to accommodate many mixed-signal layout generation needs.
Download or read book Low Voltage CMOS Log Companding Analog Design written by Francisco Serra-Graells and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Voltage CMOS Log Companding Analog Design presents in detail state-of-the-art analog circuit techniques for the very low-voltage and low-power design of systems-on-chip in CMOS technologies. The proposed strategy is mainly based on two bases: the Instantaneous Log Companding Theory, and the MOSFET operating in the subthreshold region. The former allows inner compression of the voltage dynamic-range for very low-voltage operation, while the latter is compatible with CMOS technologies and suitable for low-power circuits. The required background on the specific modeling of the MOS transistor for Companding is supplied at the beginning. Following this general approach, a complete set of CMOS basic building blocks is proposed and analyzed for a wide variety of analog signal processing. In particular, the covered areas include: amplification and AGC, arbitrary filtering, PTAT generation, and pulse duration modulation (PDM). For each topic, several case studies are considered to illustrate the design methodology. Also, integrated examples in 1.2um and 0.35um CMOS technologies are reported to verify the good agreement between design equations and experimental data. The resulting analog circuit topologies exhibit very low-voltage (i.e. 1V) and low-power (few tenths of uA) capabilities. Apart from these specific design examples, a real industrial application in the field of hearing aids is also presented as the main demonstrator of all the proposed basic building blocks. This system-on-chip exhibits true 1V operation, high flexibility through digital programmability and very low-power consumption (about 300uA including the Class-D amplifier). As a result, the reported ASIC can meet the specifications of a complete family of common hearing aid models. In conclusion, this book is addressed to both industry ASIC designers who can apply its contents to the synthesis of very low-power systems-on-chip in standard CMOS technologies, as well as to the teachers of modern circuit design in electronic engineering.
Download or read book Systematic Design of Analog IP Blocks written by Jan Vandenbussche and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a design methodology that can help to bridge the productivity gap. Two different types of designs, depending on the design challenge, have been identified. To validate the presented methodologies, the authors have selected and designed accordingly three different industrial-strength applications.
Download or read book Design of Low Voltage CMOS Switched Opamp Switched Capacitor Systems written by Vincent S.L. Cheung and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume emphasizes the design and development of advanced switched-opamp architectures and techniques for low-voltage low-power switched-capacitor systems. It presents a novel multi-phase switched-opamp technique together with new system architectures that are critical in improving significantly the performance of switched-capacitor systems at low supply voltages.
Download or read book Operational Amplifier Speed and Accuracy Improvement written by Vadim V. Ivanov and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operational Amplifier Speed and Accuracy Improvement proposes a new methodology for the design of analog integrated circuits. The usefulness of this methodology is demonstrated through the design of an operational amplifier. This methodology consists of the following iterative steps: description of the circuit functionality at a high level of abstraction using signal flow graphs; equivalent transformations and modifications of the graph to the form where all important parameters are controlled by dedicated feedback loops; and implementation of the structure using a library of elementary cells. Operational Amplifier Speed and Accuracy Improvement shows how to choose structures and design circuits which improve an operational amplifier's important parameters such as speed to power ratio, open loop gain, common-mode voltage rejection ratio, and power supply rejection ratio. The same approach is used to design clamps and limiting circuits which improve the performance of the amplifier outside of its linear operating region, such as slew rate enhancement, output short circuit current limitation, and input overload recovery.
