Download or read book The Physics of Diamond written by Società italiana di fisica and published by IOS Press. This book was released on 1997 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond is an extreme material among possible atomic aggregations in nature, and as such has many extreme properties. This unique position makes it a fascinating subject both for science and for applications. This has been particularly true in recent years, since the surprising discovery at Union Carbide (1953) of the possibility of chemical vapour deposition of diamond films at low pressures, where diamond is metastable with respect to graphite. This discovery cleared the way to the development of economical deposition techniques that have been obtaining progressively better-quality diamond, both pure and doped, in a controlled way and for a variety of applications. The remarkable properties and applications range from mechanical (the extreme hardness, tensile and compressive strength, wear performance) to thermal (the highest conductivity), optical (wide range of transparency), chemical (inertness to most chemicals), biological (biocompatibility) and electronic (high electronic carrier mobility, large band gap and dielectric breakdown strength, negative electron affinity), with the simultaneous presence of so many extraordinary qualities often resulting in added value for a given application.We are presently at a turning point in the development of diamond physics and applications. While some achievements can be considered well established, on the other hand, new opportunities and challenges are facing the scientific community, particularly with regard to novel exciting deposition processes and techniques or new properties and applications in electronics. This Enrico Fermi Course on "The Physics of Diamond" is particularly focused on the new developments and prospects, which may well constitute a reference point for a new generation of scientists at what may possibly be the beginning of a new age in diamond. The course attracted several of the most distinguished experts in the field as lecturers and an audience of almost as distinguished students and observers from 19 countries. Participation and discussions were lively to the very last day, ranging from traditional diamond physics to new diamond physics, and from well-known applications to the new exciting opportunities.The material in this volume is organized in the following way: the first part (13 lectures) is essentially devoted to growth and structure, the second part to properties and applications, with a closing lecture exploring new exotic diamonds in the distant future. The earlier lectures extensively cover the many processes of plasma chemical vapour deposition, including advanced contributions in theoretical modelling of these processes. Novel deposition mechanisms are considered: low-temperature CVD and laser-activated processes, including the so-called QQC experiments. This first part closes with a discussion of amorphous phases. In the second part, particular emphasis is placed on electronic properties and applications. This includes an extensive discussion of doping and, in addition, the promising perspectives of diamond as an electron emitter. Its newly discovered remarkable electron affinity properties lead to a new dimension in research and development, of great strategical importance for an increasing role of diamond in electronics.
Download or read book Physics and Applications of CVD Diamond written by Satoshi Koizumi and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here, leading scientists report on why and how diamond can be optimized for applications in bioelectronic and electronics. They cover such topics as growth techniques, new and conventional doping mechanisms, superconductivity in diamond, and excitonic properties, while application aspects include quantum electronics at room temperature, biosensors as well as diamond nanocantilevers and SAWs. Written in a review style to make the topic accessible for a wider community of scientists working in interdisciplinary fields with backgrounds in physics, chemistry, biology and engineering, this is essential reading for everyone working in environments that involve conventional electronics, biotechnology, quantum computing, quantum cryptography, superconductivity and light emission from highly excited excitonic systems.
Download or read book Novel Aspects of Diamond written by Nianjun Yang and published by Springer. This book was released on 2019-04-02 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is in honor of the contribution of Professor Xin Jiang (Institute of Materials Engineering, University of Siegen, Germany) to diamond. The objective of this book is to familiarize readers with the scientific and engineering aspects of CVD diamond films and to provide experienced researchers, scientists, and engineers in academia and industry with the latest developments and achievements in this rapidly growing field. This 2nd edition consists of 14 chapters, providing an updated, systematic review of diamond research, ranging from its growth, and properties up to applications. The growth of single-crystalline and doped diamond films is included. The physical, chemical, and engineering properties of these films and diamond nanoparticles are discussed from theoretical and experimental aspects. The applications of various diamond films and nanoparticles in the fields of chemistry, biology, medicine, physics, and engineering are presented.
Download or read book Optical Properties of Diamond written by A.M. Zaitsev and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is the most comprehensive compilation of data on the optical properties of diamond ever written. It presents a multitude of data previously for the first time in English. The author provides quick access to the most comprehensive information on all aspects of the field.
Download or read book Some Aspects of Diamonds in Scientific Research and High Technology written by Evgeniy Lipatov and published by BoD – Books on Demand. This book was released on 2020-07-08 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers some aspects of diamond-based technologies: CVD diamond synthesis, application of diamond as a material with high hardness and thermal conductivity, and the investigation of charge carrier transport properties of synthetic diamond and chemical properties of diamond surfaces.
Download or read book Diamond for Quantum Applications Part 2 written by and published by Academic Press. This book was released on 2020-10-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond for Quantum Applications Part Two, Volume 104, the latest release in the Semiconductors and Semimetals series, highlights new advances in the field, with this new volume presenting interesting chapters on a variety of timely topics including Color center formation by deterministic single ion implantation, Diamond and Its Investigation by Advanced TEM, Fundaments of photo-electric readout of spin states in diamond, Integrated quantum photonic circuits with polycrystalline diamond, Diamond Membranes, and Diamond nanophotonic and opt mechanics. Provides the authority and expertise of leading contributors from an international board of authors Presents the latest release in the Semiconductors and Semimetals series Updated release includes the latest information on the use of diamonds for quantum applications
Download or read book Synthetic Diamond written by Karl E. Spear and published by John Wiley & Sons. This book was released on 1994-04-04 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: A riveting look at the science, technology and people involved in overcoming early impracticalities of the fledgling chemical vapor deposition (CVD) synthesis method and its development in today's state of commercial readiness. Provides insights into numerous vapor phase techniques. Surveys the synthesis, structure, properties and applications of diamondlike carbon. Details current and rapidly emerging applications, manufacturing and markets.
Download or read book Quantum Information Processing with Diamond written by Steven Prawer and published by Elsevier. This book was released on 2014-05-12 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond nitrogen vacancy (NV) color centers can transform quantum information science into practical quantum information technology, including fast, safe computing. Quantum Information Processing with Diamond looks at the principles of quantum information science, diamond materials, and their applications. Part one provides an introduction to quantum information processing using diamond, as well as its principles and fabrication techniques. Part two outlines experimental demonstrations of quantum information processing using diamond, and the emerging applications of diamond for quantum information science. It contains chapters on quantum key distribution, quantum microscopy, the hybridization of quantum systems, and building quantum optical devices. Part three outlines promising directions and future trends in diamond technologies for quantum information processing and sensing. Quantum Information Processing with Diamond is a key reference for R&D managers in industrial sectors such as conventional electronics, communication engineering, computer science, biotechnology, quantum optics, quantum mechanics, quantum computing, quantum cryptology, and nanotechnology, as well as academics in physics, chemistry, biology, and engineering. Brings together the topics of diamond and quantum information processing Looks at applications such as quantum computing, neural circuits, and in vivo monitoring of processes at the molecular scale
Download or read book Optical Engineering of Diamond written by Rich Mildren and published by John Wiley & Sons. This book was released on 2013-01-14 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive book on the engineering of diamond optical devices. Written by 39 experts in the field, it gives readers an up-to-date review of the properties of optical quality synthetic diamond (single crystal and nanodiamond) and the nascent field of diamond optical device engineering. Application areas covered in detail in this book include quantum information processing, high performance lasers and light sources, and bioimaging. It provides scientists, engineers and physicists with a valuable and practical resource for the design and development of diamond-based optical devices.
Download or read book Diamond for Quantum Applications Part 1 written by and published by Academic Press. This book was released on 2020-06-16 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond for Quantum Applications Part 1, Volume 103, the latest release in the Semiconductors and Semimetals series, highlights new advances in the field, with this new volume presenting interesting chapters on a variety of timely topics. Each chapter is written by an international board of authors. Provides the authority and expertise of leading contributors from an international board of authors Presents the latest release in the Semiconductors and Semimetals series Updated release includes the latest information on the use of diamonds for quantum applications
Download or read book Handbook of Diamond Technology written by W.R. Fahrner and published by Trans Tech Publications Ltd. This book was released on 2000-05-01 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of twenty years of experience on the fabrication of active micro-cooling systems, the fabrication of electronic devices (radiation and magnetic sensors, transistors), the fabrication of optical devices (new green LED), and the adaptation of silicon simulation software to diamond. This includes the integration of the current transport models of diamond. The book emphasize the subjects' substrate selection, mechanical and chemical structuring, doping, and metallization. Also included is simulation as a tool to predict the results of the technological steps. Though a state of the art method is far behind in comparison to the silicon and gallium arsenide growth we assume the same state as exists in these technologies, namely that the diamond substrates are commercially available.
Download or read book HPHT Treated Diamonds written by Inga A. Dobrinets and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature and high-pressure treatment of diamond is becoming an important technology to elaborate diamonds. This is the first book providing a comprehensive review of the properties of HPHT-treated diamonds, based on the analysis of published data and the work of the authors. The book gives a detailed analysis of the physics of transformation of internal structures of diamonds subjected to HPHT treatment and discusses how these transformations can be detected using methods of optical microscopy and spectroscopy. It also gives practical recommendations for the recognition of HPHT-treated diamonds. The book is written in a language and terms which can be understood by a broad audience of physicists, mineralogists and gemologists.
Download or read book Fisica Del Diamante written by A. Paoletti and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond is an extreme material among possible atomic aggregations in nature, and as such has many extreme properties. This unique position makes it a fascinating subject both for science and for applications. This has been particularly true in recent years, since the surprising discovery at Union Carbide (1953) of the possibility of chemical vapour deposition of diamond films at low pressures, where diamond is metastable with respect to graphite. This discovery cleared the way to the development of economical deposition techniques that have been obtaining progressively better-quality diamond, both pure and doped, in a controlled way and for a variety of applications. The remarkable properties and applications range from mechanical (the extreme hardness, tensile and compressive strength, wear performance) to thermal (the highest conductivity), optical (wide range of transparency), chemical (inertness to most chemicals), biological (biocompatibility) and electronic (high electronic carrier mobility, large band gap and dielectric breakdown strength, negative electron affinity), with the simultaneous presence of so many extraordinary qualities often resulting in added value for a given application.We are presently at a turning point in the development of diamond physics and applications. While some achievements can be considered well established, on the other hand, new opportunities and challenges are facing the scientific community, particularly with regard to novel exciting deposition processes and techniques or new properties and applications in electronics. This Enrico Fermi Course on "The Physics of Diamond" is particularly focused on the new developments and prospects, which may well constitute a reference point for a new generation of scientists at what may possibly be the beginning of a new age in diamond. The course attracted several of the most distinguished experts in the field as lecturers and an audience of almost as distinguished students and observers from 19 countries. Participation and discussions were lively to the very last day, ranging from traditional diamond physics to new diamond physics, and from well-known applications to the new exciting opportunities.The material in this volume is organized in the following way: the first part (13 lectures) is essentially devoted to growth and structure, the second part to properties and applications, with a closing lecture exploring new exotic diamonds in the distant future. The earlier lectures extensively cover the many processes of plasma chemical vapour deposition, including advanced contributions in theoretical modelling of these processes. Novel deposition mechanisms are considered: low-temperature CVD and laser-activated processes, including the so-called QQC experiments. This first part closes with a discussion of amorphous phases. In the second part, particular emphasis is placed on electronic properties and applications. This includes an extensive discussion of doping and, in addition, the promising perspectives of diamond as an electron emitter. Its newly discovered remarkable electron affinity properties lead to a new dimension in research and development, of great strategical importance for an increasing role of diamond in electronics.
Download or read book CVD Diamond for Electronic Devices and Sensors written by Ricardo S. Sussmann and published by John Wiley & Sons. This book was released on 2009-01-09 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic diamond is diamond produced by using chemical or physical processes. Like naturally occurring diamond it is composed of a three-dimensional carbon crystal. Due to its extreme physical properties, synthetic diamond is used in many industrial applications, such as drill bits and scratch-proof coatings, and has the potential to be used in many new application areas A brand new title from the respected Wiley Materials for Electronic and Optoelectronic Applications series, this title is the most up-to-date resource for diamond specialists. Beginning with an introduction to the properties of diamond, defects, impurities and the growth of CVD diamond with its imminent commercial impact, the remainder of the book comprises six sections: introduction, radiation sensors, active electronic devices, biosensors, MEMs and electrochemistry. Subsequent chapters cover the diverse areas in which diamond applications are having an impact including electronics, sensors and actuators and medicine.
Download or read book Novel Aspects of Diamond II written by Soumen Mandal and published by Springer Nature. This book was released on 2024 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book covers a wide range of novel scientific and engineering aspects of diamond films produced from chemical vapor deposition. It focuses on the most recent developments and achievements in this rapidly growing field from scientists and engineers across the domains of chemistry, biology, medicine, physics, and semiconductor engineering. The latest volume of this consistently well-cited book brings an updated, systematic review of the latest developments in diamond research and application. Featuring contributed chapters from a mix of highly-active international researchers, this new edition presents recent research focusing on topics such as diamond for thermal management in high-power electronics, diamond MOSFETs, water treatment, application of machine learning for nanodiamonds, theoretical aspects of diamond growth, current trends in emerging diamond technologies, and the growth of doped single-crystal diamond. This book is especially appealing to interdisciplinary researchers and industry professionals working on advanced diamond devices and applications, as well as theoretical and computational methods for predicting and designing new diamond materials.
Download or read book The Diamond Makers written by Robert M. Hazen and published by Cambridge University Press. This book was released on 1999-07-22 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humans have treasured diamonds for their exquisite beauty and unrivaled hardness for thousands of years. Deep within the earth, diamonds grow. Diamonds the size of footballs, the size of watermelons - billions of tons of diamonds wait for eternity a hundred miles beyond our reach. Spanning centuries of ground-breaking science, bitter rivalry, outright fraud, and self-delusion, The Diamond Makers is a compelling narrative centered around the brilliant, often eccentric, and controversial pioneers of high pressure research. This vivid blend of dramatic personal stories and extraordinary scientific advances - and devastating failures - brings alive the quest to create diamond. Scientists have harnessed crushing pressures and scorching temperatures to transform almost any carbon-rich material, from road tar to peanut butter, into the most prized of gems. The book reveals the human dimensions of research - the competition, bravery, jealousy, teamwork, and greed that ultimately led to today's billion-dollar diamond synthesis industry.
Download or read book The Physics and Chemistry of Carbides Nitrides and Borides written by R. Freer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbides, nitrides and borides are families of related refractory materials. Traditionally they have been employed in applications associated with engineering ceramics where either high temperature strength or stability is of primary importance. In recent years there has been a growing awareness of the interesting electrical, thermal and optical properties exhibited by these materials, and the fact that many can be prepared as monolithic ceramics, single crystals and thin films. In practical terms carbides, nitrides and borides offer the prospect of a new generation of semiconductor materials, for example, which can function at very high temperatures in severe environmental conditions. However, as yet, we have only a limited understanding of the detailed physics and chemistry of the materials and how the preparation techniques influence the properties. Under the auspices of the NATO Science Committee an Advanced Research Workshop (ARW) was held on the Physics and Chemistry of Carbides, Nitrides and Borides (University of Manchester, 18-22 September, 1989) in order to assess progress to date and identify the most promising themes and materials for future research. An international group of 38 scientists considered developments in 5 main areas: The preparation of powders, monolithic ceramics, single crystals and thin films; Phase transformations, microstructure, defect structure and mass transport; Materials stability; Theoretical studies; Electrical, thermal and optical properties of bulk materials and thin films.