Download or read book The Performance of Fractured Horizontal Well in Tight Gas Reservoir written by Jiajing Lin and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Horizontal wells have been used to increase reservoir recovery, especially in unconventional reservoirs, and hydraulic fracturing has been applied to further extend the contact with the reservoir to increase the efficiency of development. In the past, many models, analytical or numerical, were developed to describe the flow behavior in horizontal wells with fractures. Source solution is one of the analytical/semi-analytical approaches. To solve fractured well problems, source methods were advanced from point sources to volumetric source, and pressure change inside fractures was considered in the volumetric source method. This study aims at developing a method that can predict horizontal well performance and the model can also be applied to horizontal wells with multiple fractures in complex natural fracture networks. The method solves the problem by superposing a series of slab sources under transient or pseudosteady-state flow conditions. The principle of the method comprises the calculation of semi-analytical response of a rectilinear reservoir with closed outer boundaries. A statistically assigned fracture network is used in the study to represent natural fractures based on the spacing between fractures and fracture geometry. The multiple dominating hydraulic fractures are then added to the natural fracture system to build the physical model of the problem. Each of the hydraulic fractures is connected to the horizontal wellbore, and the natural fractures are connected to the hydraulic fractures through the network description. Each fracture, natural or hydraulically induced, is treated as a series of slab sources. The analytical solution of superposed slab sources provides the base of the approach, and the overall flow from each fracture and the effect between the fractures are modeled by applying superposition principle to all of the fractures. It is assumed that hydraulic fractures are the main fractures that connect with the wellbore and the natural fractures are branching fractures which only connect with the main fractures. The fluid inside of the branch fractures flows into the main fractures, and the fluid of the main fracture from both the reservoir and the branch fractures flows to the wellbore. Predicting well performance in a complex fracture network system is extremely challenged. The statistical nature of natural fracture networks changes the flow characteristic from that of a single linear fracture. Simply using the single fracture model for individual fracture, and then adding the flow from each fracture for the network could introduce significant error. This study provides a semi-analytical approach to estimate well performance in a complex fracture network system.

Download or read book Modeling Performance of Horizontal Wells with Multiple Fractures in Tight Gas Reservoirs written by Guangwei Dong and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiple transverse fracturing along a horizontal well is a relatively new technology that is designed to increase well productivity by increasing the contact between the reservoir and the wellbore. For multiple transverse fractures, the performance of the well system is determined by three aspects: the inflow from the reservoir to the fracture, the flow from the fracture to the wellbore, and the inflow from the reservoir to the horizontal wellbore. These three aspects influence each other and combined, influence the wellbore outflow. In this study, we develop a model to effectively formulate the inter-relationships of a multi-fracture system. This model includes a reservoir model and a wellbore model. The reservoir model is established to calculate both independent and inter-fracture productivity index to quantify the contribution from all fractures on pressure drop of each fracture, by using the source functions to solve the single-phase gas reservoir flow model. The wellbore model is used to calculate the pressure distribution along the wellbore and the relationship of pressure between neighboring fractures, based on the basic pressure drop model derived from the mechanical energy balance. A set of equations with exactly the same number of fractures will be formed to model the system by integrating the two models. Because the equations are nonlinear, iteration method is used to solve them. With our integrated reservoir and wellbore model, we conduct a field study to find the best strategy to develop the field by hydraulic fracturing. The influence of reservoir size, horizontal and vertical permeability, well placement, and fracture orientation, type (longitudinal and transverse), number and distribution are completely examined in this study. For any specific field, a rigorous step-by-step procedure is proposed to optimize the field.

Download or read book The Effect of Well Trajectory on Production Performance of Tight Gas Wells written by Mohammad Aldousari and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Horizontal wells are a very important element in oil and gas industry due to their distinguished advantages. Horizontal wells are not technically horizontal. This is because of the structural nature of reservoir formations and drilling procedures. In response to the reservoir rock's strength, the horizontal well deviates upward and downward while being drilled forming an undulating path instead of a horizontal. In this study, horizontal wells with an undulating trajectory within a gas reservoir have been studied. The aim of this research is to investigate the effect of the trajectory angle on pressure drop in horizontal wells. In addition, the contribution of water flow to pressure drop is a part of this research. Generally, water comes from different sources like an aquifer or a water flood job. In low permeability horizontal wells, hydraulic fracturing introduces water to gas wells. Water distribution is an important issue in gas wells production. In order to achieve the goal of this study, a model has been developed to simulate different situations for a horizontal well with an undulating trajectory in gas reservoirs. This study is a step forward to understand well performance in low permeability gas reservoirs.

Download or read book Optimization of Fractured Well Performance of Horizontal Gas Wells written by Fellipe Vieira Magalhães and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In low-permeability gas reservoirs, horizontal wells have been used to increase the reservoir contact area, and hydraulic fracturing has been further extending the contact between wellbores and reservoirs. This thesis presents an approach to evaluate horizontal well performance for fractured or unfractured gas wells and a sensitivity study of gas well performance in a low permeability formation. A newly developed Distributed Volumetric Sources (DVS) method was used to calculate dimensionless productivity index for a defined source in a box-shaped domain. The unique features of the DVS method are that it can be applied to transient flow and pseudo-steady state flow with a smooth transition between the boundary conditions. In this study, I conducted well performance studies by applying the DVS method to typical tight sandstone gas wells in the US basins. The objective is to determine the best practice to produce horizontal gas wells. For fractured wells, well performance of a single fracture and multiple fractures are compared, and the effect of the number of fractures on productivity of the well is presented based on the well productivity. The results from this study show that every basin has a unique ideal set of fracture number and fracture length. Permeability plays an important role on dictating the location and the dimension of the fractures. This study indicated that in order to achieve optimum production, the lower the permeability of the formation, the higher the number of fractures.

Download or read book Naturally Fractured Reservoirs written by Roberto Aguilera and published by PennWell Books. This book was released on 1980 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals exclusively with naturally fractured reservoirs and includes many subjects usually treated in separate volumes. A highly practical edition, Naturally Fractured Reservoirs is written for students, reservoir geologists, log analysts and petroleum engineers.

Download or read book Geomechanical Studies of the Barnett Shale Texas USA written by John Peter Vermylen and published by Stanford University. This book was released on 2011 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents five studies of a gas shale reservoir using diverse methodologies to investigate geomechanical and transport properties that are important across the full reservoir lifecycle. Using the Barnett shale as a case study, we investigated adsorption, permeability, geomechanics, microseismicity, and stress evolution in two different study areas. The main goals of this thesis can be divided into two parts: first, to investigate how flow properties evolve with changes in stress and gas species, and second, to understand how the interactions between stress, fractures, and microseismicity control the creation of a permeable reservoir volume during hydraulic fracturing. In Chapter 2, we present results from adsorption and permeability experiments conducted on Barnett shale rock samples. We found Langmuir-type adsorption of CH4 and N2 at magnitudes consistent with previous studies of the Barnett shale. Three of our samples demonstrated BET-type adsorption of CO2, in contrast to all previous studies on CO2 adsorption in gas shales, which found Langmuir-adsorption. At low pressures (600 psi), we found preferential adsorption of CO2 over CH4 ranging from 3.6x to 5.5x. While our measurements were conducted at low pressures (up to 1500 psi), when our model fits are extrapolated to reservoir pressures they reach similar adsorption magnitudes as have been found in previous studies. At these high reservoir pressures, the very large preferential adsorption of CO2 over CH4 (up to 5-10x) suggests a significant potential for CO2 storage in gas shales like the Barnett if practical problems of injectivity and matrix transport can be overcome. We successfully measured permeability versus effective stress on two intact Barnett shale samples. We measured permeability effective stress coefficients less than 1 on both samples, invalidating our hypothesis that there might be throughgoing flow paths within the soft, porous organic kerogen that would lead the permeability effective stress coefficient to be greater than 1. The results suggest that microcracks are likely the dominant flow paths at these scales. In Chapter 3, we present integrated geological, geophysical, and geomechanical data in order to characterize the rock properties in our Barnett shale study area and to model the stress state in the reservoir before hydraulic fracturing occurred. Five parallel, horizontal wells were drilled in the study area and then fractured using three different techniques. We used the well logs from a vertical pilot well and a horizontal well to constrain the stress state in the reservoir. While there was some variation along the length of the well, we were able to determine a best fit stress state of Pp = 0.48 psi/ft, Sv = 1.1 psi/ft, SHmax = 0.73 psi/ft, and Shmin = 0.68 psi/ft. Applying this stress state to the mapped natural fractures indicates that there is significant potential for induced shear slip on natural fracture planes in this region of the Barnett, particularly close to the main hydraulic fracture where the pore pressure increase during hydraulic fracturing is likely to be very high. In Chapter 4, we present new techniques to quantify the robustness of hydraulic fracturing in gas shale reservoirs. The case study we analyzed involves five parallel horizontal wells in the Barnett shale with 51 frac stages. To investigate the numbers, sizes, and types of microearthquakes initiated during each frac stage, we created Gutenberg-Richter-type magnitude distribution plots to see if the size of events follows the characteristic scaling relationship found in natural earthquakes. We found that slickwater fracturing does generate a log-linear distribution of microearthquakes, but that it creates proportionally more small events than natural earthquake sources. Finding considerable variability in the generation of microearthquakes, we used the magnitude analysis as a proxy for the "robustness" of the stimulation of a given stage. We found that the conventionally fractured well and the two alternately fractured wells ("zipperfracs") were more effective than the simultaneously fractured wells ("simulfracs") in generating microearthquakes. We also found that the later stages of fracturing a given well were more successful in generating microearthquakes than the early stages. In Chapter 5, we present estimates of stress evolution in our study reservoir through analysis of the instantaneous shut-in pressure (ISIP) at the end of each stage. The ISIP increased stage by stage for all wells, but the simulfrac wells showed the greatest increase and the zipperfrac wells the least. We modeled the stress increase in the reservoir with a simple sequence of 2-D cracks along the length of the well. When using a spacing of one crack per stage, the modeled stress increase was nearly identical to the measured stress increase in the zipperfrac wells. When using three cracks per stage, the modeled final stage stress magnitude matched the measured final stage stress magnitude from the simulfrac wells, but the rate of stress increase in the simulfrac wells was much more gradual than the model predicted. To further investigate the causes of these ISIP trends, we began numerical flow and stress analysis to more realistically model the processes in the reservoir. One of our hypotheses was that the shorter total time needed to complete all the stages of the simulfrac wells was the cause of the greater ISIP increase compared to the zipperfrac wells. The microseismic activity level measured in Chapter 4 also correlates with total length of injection, suggesting leak off into the reservoir encouraged shear failure. Numerical modeling using the coupled FEM and flow software GEOSIM was able to model some cumulative stress increase the reservoir, but the full trend was not replicated. Further work to model field observations of hydraulic fracturing will enhance our understanding of the impact that hydraulic fracturing and stress change have on fracture creation and permeability enhancement in gas shales.

Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.

Download or read book Performance Comparison of Transverse and Longitudinal Fractured Horizontal Wells Over Varied Reservoir Permeability written by Fen Yang and published by . This book was released on 2014 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Since the first application in the mid-1980's, multiple fractured horizontal wells have proven to be an effective means of extracting hydrocarbons. These wells require careful consideration of wellbore orientation relative to the horizontal principle stress. Wellbore orientation can lead to transverse fractures which are perpendicular to the wellbore, or longitudinal fractures parallel the wellbore. Questions arise regarding whether one fracture orientation is consistently preferred over the other, or if certain conditions affect the choice. Historical work has examined the impact of horizontal wellbore azimuth in the Barnett and Marcellus Shale where public data was reviewed and statistical well analysis was conducted respectively. Comparison between transverse and longitudinal fracturing in moderate gas reservoirs has been performed with experimental study. This work includes both simulations and actual field cases studies. It compares transverse multiple fractured horizontal wells with longitudinal ones in terms of both well performance and economics. The study covers both gas and oil reservoirs and extends prior work to unconventional resources by extending the reservoir permeability to 0.00005 md. A range of reservoir permeability is identified for the preferable fracture configuration through simulations. Field production history of the Bakken, Barnett, Eagle Ford and Delaware formations are investigated and compared to the simulation results. In addition, this work analyzes the impact of fracture conductivity, lateral length, fracture half-length, completion method and hydrocarbon prices. The conclusions can be used as a reference in decision making on horizontal drilling and hydraulic fracturing for both unconventional and conventional resources"--Abstract, page iii.

Download or read book Unconventional Petroleum Geology written by Caineng Zou and published by Elsevier. This book was released on 2017-03-10 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unconventional Petroleum Geology, Second Edition presents the latest research results of global conventional and unconventional petroleum exploration and production. The first part covers the basics of unconventional petroleum geology, its introduction, concept of unconventional petroleum geology, unconventional oil and gas reservoirs, and the origin and distribution of unconventional oil and gas. The second part is focused on unconventional petroleum development technologies, including a series of technologies on resource assessment, lab analysis, geophysical interpretation, and drilling and completion. The third and final section features case studies of unconventional hydrocarbon resources, including tight oil and gas, shale oil and gas, coal bed methane, heavy oil, gas hydrates, and oil and gas in volcanic and metamorphic rocks. Provides an up-to-date, systematic, and comprehensive overview of all unconventional hydrocarbons Reorganizes and updates more than half of the first edition content, including four new chapters Includes a glossary on unconventional petroleum types, including tight-sandstone oil and gas, coal-bed gas, shale gas, oil and gas in fissure-cave-type carbonate rocks, in volcanic reservoirs, and in metamorphic rocks, heavy crude oil and natural bitumen, and gas hydrates Presents new theories, new methods, new technologies, and new management methods, helping to meet the demands of technology development and production requirements in unconventional plays

Download or read book Petroleum Engineering Handbook written by Larry W. Lake and published by . This book was released on 2006 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Petroleum Engineering Handbook has long been recognized as a valuable comprehensive reference book that offers practical day-to-day applications for students and experienced engineering professionals alike. Available now in 7 Volumes, Volume 1 covers General Engineering topics including chapters on mathematics, fluid properties (fluid sampling techniques; properties and correlations of oil, gas, condensate, and water; hydrocarbon phase behavior and phase diagrams for hydrocarbon systems; the phase behavior of water/hydrocarbon systems; and the properties of waxes, asphaltenes, and crude oil emulsions), rock properties (bulk rock properties, permeability, relative permeability, and capillary pressure), the economic and regulatory environment, and the role of fossil energy in the 21st century energy mix.

Download or read book Reservoir Characterization written by Larry Lake and published by Elsevier. This book was released on 2012-12-02 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir Characterization is a collection of papers presented at the Reservoir Characterization Technical Conference, held at the Westin Hotel-Galleria in Dallas on April 29-May 1, 1985. Conference held April 29-May 1, 1985, at the Westin Hotel—Galleria in Dallas. The conference was sponsored by the National Institute for Petroleum and Energy Research, Bartlesville, Oklahoma. Reservoir characterization is a process for quantitatively assigning reservoir properties, recognizing geologic information and uncertainties in spatial variability. This book contains 19 chapters, and begins with the geological characterization of sandstone reservoir, followed by the geological prediction of shale distribution within the Prudhoe Bay field. The subsequent chapters are devoted to determination of reservoir properties, such as porosity, mineral occurrence, and permeability variation estimation. The discussion then shifts to the utility of a Bayesian-type formalism to delineate qualitative ""soft"" information and expert interpretation of reservoir description data. This topic is followed by papers concerning reservoir simulation, parameter assignment, and method of calculation of wetting phase relative permeability. This text also deals with the role of discontinuous vertical flow barriers in reservoir engineering. The last chapters focus on the effect of reservoir heterogeneity on oil reservoir. Petroleum engineers, scientists, and researchers will find this book of great value.

Download or read book Study of Flow Regimes in Multiply fractured Horizontal Wells in Tight Gas and Shale Gas Reservoir Systems written by Craig Matthew Freeman and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Various analytical, semi-analytical, and empirical models have been proposed to characterize rate and pressure behavior as a function of time in tight/shale gas systems featuring a horizontal well with multiple hydraulic fractures. Despite a small number of analytical models and published numerical studies there is currently little consensus regarding the large-scale flow behavior over time in such systems. The purpose of this work is to construct a fit-for-purpose numerical simulator which will account for a variety of production features pertinent to these systems, and to use this model to study the effects of various parameters on flow behavior. Specific features examined in this work include hydraulically fractured horizontal wells, multiple porosity and permeability fields, desorption, and micro-scale flow effects. The theoretical basis of the model is described in Chapter I, along with a validation of the model. We employ the numerical simulator to examine various tight gas and shale gas systems and to illustrate and define the various flow regimes which progressively occur over time. We visualize the flow regimes using both specialized plots of rate and pressure functions, as well as high-resolution maps of pressure distributions. The results of this study are described in Chapter II. We use pressure maps to illustrate the initial linear flow into the hydraulic fractures in a tight gas system, transitioning to compound formation linear flow, and then into elliptical flow. We show that flow behavior is dominated by the fracture configuration due to the extremely low permeability of shale. We also explore the possible effect of microscale flow effects on gas effective permeability and subsequent gas species fractionation. We examine the interaction of sorptive diffusion and Knudsen diffusion. We show that microscale porous media can result in a compositional shift in produced gas concentration without the presence of adsorbed gas. The development and implementation of the micro-flow model is documented in Chapter III. This work expands our understanding of flow behavior in tight gas and shale gas systems, where such an understanding may ultimately be used to estimate reservoir properties and reserves in these types of reservoirs.

Download or read book Development of Unconventional Reservoirs written by Reza Rezaee and published by MDPI. This book was released on 2020-04-16 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for energy is increasing and but the production from conventional reservoirs is declining quickly. This requires an economically and technically feasible source of energy for the coming years. Among some alternative future energy solutions, the most reasonable source is from unconventional reservoirs. As the name “unconventional” implies, different and challenging approaches are required to characterize and develop these resources. This Special Issue covers some of the technical challenges for developing unconventional energy sources from shale gas/oil, tight gas sand, and coalbed methane.

Download or read book Comparison of Multi fractured Horizontal Wells and Fishbone Wells in Tight Gas Reservoirs written by Yue Wang and published by . This book was released on 2008 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Finite Conductivity Horizontal Well Fractures written by Mohammed Al-Kobaisi and published by LAP Lambert Academic Publishing. This book was released on 2010-09 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Horizontal wells are preferred in the oil and gas fields because of their effectiveness in heterogeneous reservoirs, potential in enhanced oil recovery, ability to reduce coning, and advantages in environmentally sensitive areas. For tight formations, the productivity of a horizontal well can be further increased by hydraulic fracturing. Recently, interest in improved models and understanding of fractured horizontal wells has been elevated due to their success in exploiting unconventional reservoirs, such as shale gas. This book presents a research on the transient pressure responses and modeling of horizontal wells with transverse vertical fractures. A hybrid numerical-analytical model is developed where the fracture flow is numerically simulated and dynamically coupled with an analytical solution for the reservoir flow. The hybrid model reduces the computational work while providing for incorporating the details of the fracture flow and different fractured horizontal well geometries. The book is intended for researchers as well as the practicing engineers in the areas of petroleum production and reservoir engineering, well completions, and stimulations.

Download or read book Performance Analysis and Optimization of Well Production in Unconventional Resource Plays written by Baljit Singh Sehbi and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Unconventional Resource Plays consisting of the lowest tier of resources (large volumes and most difficult to develop) have been the main focus of US domestic activity during recent times. Horizontal well drilling and hydraulic fracturing completion technology have been primarily responsible for this paradigm shift. The concept of drainage volume is being examined using pressure diffusion along streamlines. We use diffusive time of flight to optimize the number of hydraulic fracture stages in horizontal well application for Tight Gas reservoirs. Numerous field case histories are available in literature for optimizing number of hydraulic fracture stages, although the conclusions are case specific. In contrast, a general method is being presented that can be used to augment field experiments necessary to optimize the number of hydraulic fracture stages. The optimization results for the tight gas example are in line with the results from economic analysis. The fluid flow simulation for Naturally Fractured Reservoirs (NFR) is performed by Dual-Permeability or Dual-Porosity formulations. Microseismic data from Barnett Shale well is used to characterize the hydraulic fracture geometry. Sensitivity analysis, uncertainty assessment, manual & computer assisted history matching are integrated to develop a comprehensive workflow for building reliable reservoir simulation models. We demonstrate that incorporating proper physics of flow is the first step in building reliable reservoir simulation models. Lack of proper physics often leads to unreasonable reservoir parameter estimates. The workflow demonstrates reduced non-uniqueness for the inverse history matching problem. The behavior of near-critical fluids in Liquid Rich Shale plays defies the production behavior observed in conventional reservoir systems. In conventional reservoirs an increased gas-oil ratio is observed as flowing bottom-hole pressure is less than the saturation pressure. The production behavior is examined by building a compositional simulation model on an Eagle Ford well. Extremely high pressure drop along the multiple transverse hydraulic fractures and high critical gas saturation are responsible for this production behavior. Integrating pore-scale flow modeling (such as Lattice Boltzmann) to the field-scale reservoir simulation may enable quantifying the effects of high capillary pressure and phase behavior alteration due to confinement in the nano-pore system. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/149482

Download or read book PVT and Phase Behaviour Of Petroleum Reservoir Fluids written by Ali Danesh and published by Elsevier. This book was released on 1998-05-07 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on PVT and Phase Behaviour Of Petroleum Reservoir Fluids is volume 47 in the Developments in Petroleum Science series. The chapters in the book are: Phase Behaviour Fundamentals, PVT Tests and Correlations, Phase Equilibria, Equations of State, Phase Behaviour Calculations, Fluid Characterisation, Gas Injection, Interfacial Tension, and Application in Reservoir Simulation.