Download or read book Nuclear Data for Science and Technology written by Syed M. Qaim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the Proceedings of the International Conference on Nuclear Data for Science and Technology held at Jillich in May 1991. The conference was in a series of application oriented nuclear data conferences organized in the past under the auspices of the Nuclear Energy Agency-Nuclear Data Committee (NEANDC) and with the support of the Nuclear Energy Agency-Committee on Reactor Physics (NEACRP). It was the fIrst international conference on nuclear data held in Germany, with the scientific responsibility entrusted to the Institute of Nuclear Chemistry of the Research Centre Jillich. The scientific programme was established by the International Programme Committee in consultation with the International Advisers, and the NEA and IAEA cooperated in the organization. A total of 328 persons from 37 countries and fIve international organizations participated. The scope of these Proceedings extends to a wide range of interdisciplinary topics dealing with measu rement, calculation, evaluation and application of nuclear data, with a major emphasis on numerical data. Both energy and non-energy related applications are considered and due attention is given to some fundamental aspects relevant to the understanding of nuclear data.
Download or read book The JEFF 3 1 1 Nuclear Data Library written by A. Santamarina and published by . This book was released on 2009 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Data Needs for Generation IV Nuclear Energy Systems written by P. Rullhusen and published by World Scientific. This book was released on 2006 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents recent progress in the improvement of the nuclear database needed for the development of Generation IV nuclear energy systems.The Generation IV International Forum (GIF) identified six advanced concepts for sustainable nuclear energy production at competitive prices and with advanced safety, with special attention to nuclear non-proliferation and physical protection issues, minimization of long-lived radiotoxic waste, and optimum natural resource utilization System groups have been established for studying these concepts in detail, and nuclear data are an inherent part of these studies. This book reviews the work recently performed for the development of these systems.The contributions include an up-to-date overview of recent achievements in sensitivity analysis, model calculations, estimates of uncertainties, and the present status of nuclear databases with regard to their applications to Generation IV systems. In the workshop, special attention was given to the identification of nuclear data needs from sensitivity analysis of benchmark experiments and the treatment of uncertainties. The proceedings contain overviews of several experimental program and recent results of interest for the development of Generation IV systems.
Download or read book Nuclear Data Needs For Generation Iv Nuclear Energy Systems Proceedings Of The International Workshop written by Peter Rullhusen and published by World Scientific. This book was released on 2006-05-08 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents recent progress in the improvement of the nuclear database needed for the development of Generation IV nuclear energy systems.The Generation IV International Forum (GIF) identified six advanced concepts for sustainable nuclear energy production at competitive prices and with advanced safety, with special attention to nuclear non-proliferation and physical protection issues, minimization of long-lived radiotoxic waste, and optimum natural resource utilization System groups have been established for studying these concepts in detail, and nuclear data are an inherent part of these studies. This book reviews the work recently performed for the development of these systems.The contributions include an up-to-date overview of recent achievements in sensitivity analysis, model calculations, estimates of uncertainties, and the present status of nuclear databases with regard to their applications to Generation IV systems. In the workshop, special attention was given to the identification of nuclear data needs from sensitivity analysis of benchmark experiments and the treatment of uncertainties. The proceedings contain overviews of several experimental program and recent results of interest for the development of Generation IV systems.
Download or read book Fusion Neutronics written by Yican Wu and published by Springer. This book was released on 2017-08-16 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive introduction to fusion neutronics, covering all key topics from the fundamental theories and methodologies, as well as a wide range of fusion system designs and experiments. It is the first-ever book focusing on the subject of fusion neutronics research. Compared with other nuclear devices such as fission reactors and accelerators, fusion systems are normally characterized by their complex geometry and nuclear physics, which entail new challenges for neutronics such as complicated modeling, deep penetration, low simulation efficiency, multi-physics coupling, etc. The book focuses on the neutronic characteristics of fusion systems and introduces a series of theories and methodologies that were developed to address the challenges of fusion neutronics. Further, it introduces readers to the unique principles and procedures of neutronics design, experimental methodologies and methodologies for fusion systems. The book not only highlights the latest advances and trends in the field, but also draws on the experiences and skills collected in the author’s more than 40 years of research. To make it more accessible and enhance its practical value, various representative examples are included to illustrate the application and efficiency of the methods, designs and experimental techniques discussed.
Download or read book Neutronics of Advanced Nuclear Systems written by Yican Wu and published by Springer. This book was released on 2019-03-19 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive introduction to the neutronics of advanced nuclear systems, covering all key aspects, from the fundamental theories and methodologies to a wide range of advanced nuclear system designs and experiments. It is the first-ever book focusing on the neutronics of advanced nuclear systems in the world. Compared with traditional nuclear systems, advanced nuclear systems are characterized by more complex geometry and nuclear physics, and pose new challenges in terms of neutronics. Based on the achievements and experiences of the author and his team over the past few decades, the book focuses on the neutronics characteristics of advanced nuclear systems and introduces novel neutron transport methodologies for complex systems, high-fidelity calculation software for nuclear design and safety evaluation, and high-intensity neutron source and technologies for neutronics experiments. At the same time, it describes the development of various neutronics designs for advanced nuclear systems, including neutronics design for ITER, CLEAR and FDS series reactors. The book not only summarizes the progress and achievements of the author’s research work, but also highlights the latest advances and investigates the forefront of the field and the road ahead.
Download or read book Handbook of Nuclear Engineering written by Dan Gabriel Cacuci and published by Springer Science & Business Media. This book was released on 2010-09-14 with total page 3701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an authoritative compilation of information regarding methods and data used in all phases of nuclear engineering. Addressing nuclear engineers and scientists at all levels, this book provides a condensed reference on nuclear engineering since 1958.
Download or read book Nuclear Reaction Data And Nuclear Reactors Physics Design And Safety Proceedings Of The Workshop written by Pavol Oblozinsky and published by World Scientific. This book was released on 1999-07-22 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides the up-to-date information behind nuclear reactor calculations, focusing on a key role of nuclear reaction data, down to the physics of nuclear interactions. It is divided into three parts. Part 1 deals with nuclear reaction models, including neutron resonances, fission, the optical model, statistical and preequilibrium models as well as nuclear level densities. Part 2 is devoted to nuclear data filling and processing; it includes lectures on nuclear data evaluation and formatting, data libraries and services, with emphasis on nuclear-data-processing codes. Part 3 presents applications in nuclear reactor calculations, emphasizing physics, design and safety.
Download or read book Thorium Energy for the World written by Jean-Pierre Revol and published by Springer. This book was released on 2016-04-05 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Thorium Energy Conference (ThEC13) gathered some of the world’s leading experts on thorium technologies to review the possibility of destroying nuclear waste in the short term, and replacing the uranium fuel cycle in nuclear systems with the thorium fuel cycle in the long term. The latter would provide abundant, reliable and safe energy with no CO2 production, no air pollution, and minimal waste production. The participants, representatives of 30 countries, included Carlo Rubbia, Nobel Prize Laureate in physics and inventor of the Energy Amplifier; Jack Steinberger, Nobel Prize Laureate in physics; Hans Blix, former Director General of the International Atomic Energy Agency (IAEA); Rolf Heuer, Director General of CERN; Pascal Couchepin, former President of the Swiss Confederation; and Claude Haegi, President of the FEDRE, to name just a few. The ThEC13 proceedings are a source of reference on the use of thorium for energy generation. They offer detailed technical reviews of the status of thorium energy technologies, from basic R&D to industrial developments. They also describe how thorium can be used in critical reactors and in subcritical accelerator-driven systems (ADS), answering the important questions: – Why is thorium so attractive and what is the role of innovation, in particular in the nuclear energy domain? – What are the national and international R&D programs on thorium technologies and how are they progressing? ThEC13 was organized jointly by the international Thorium Energy Committee (iThEC), an association based in Geneva, and the International Thorium Energy Organisation (IThEO). It was held in the Globe of Science and Innovation at the European Organization for Nuclear Research (CERN), Geneva, Switzerland, in October 2013.
Download or read book Accelerator Driven System at Kyoto University Critical Assembly written by Cheol Ho Pyeon and published by Springer Nature. This book was released on 2021-03-19 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is a unique compilation of experimental benchmark analyses of the accelerator-driven system (ADS) at the Kyoto University Critical Assembly (KUCA) on the most recent advances in the development of computational methods. It is devoted especially to nuclear engineers and scientists. Readers will find a detailed description of advanced measurement techniques and calculation methodologies for the ADS with 14 MeV neutrons and high-energy neutrons (with combined use of 100 MeV protons and Pb-Bi target) at KUCA. Additionally, experimental results of nuclear transmutation of minor actinides by ADS and at a critical state are included. Readers also have access to benchmarks of specific ADS experiments with raw data in the Appendix. The book is a valuable resource for the ADS experiments at KUCA which are globally recognized as both static and kinetic studies from the point of view of fundamental research.
Download or read book Introduction to Sustainable Energy Transformation written by Henryk Anglart and published by CRC Press. This book was released on 2021-11-26 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides an accessible introduction to various energy transformation technologies and their influences on the environment. Here the energy transformation is understood as any physical process induced by humans, in which energy is intentionally transformed from one form to another. This book provides an accessible introduction to the subject: covering the theory, principles of design, operation, and efficiency of the systems in addition to discerning concepts such as energy, entropy, exergy, efficiency, and sustainability. It is not assumed that readers have any previous exposure to such concepts as laws of thermodynamics, entropy, exergy, fluid mechanics or heat transfer, and is therefore an ideal textbook for advanced undergraduate students. Key features: Represents a complete source of information on sustainable energy transformation systems and their externalities. Includes all existing and major emerging technologies in the field. Chapters include numerous examples and problems for further learning opportunities.
Download or read book Advanced Treatment of Fission Yield Effects and Method Development for Improved Reactor Depletion Calculations written by Kern, Kilian and published by KIT Scientific Publishing. This book was released on 2019-03-01 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fission product yield data play an important role in simulations of nuclear fission reactors, aimed at fuel cycle and safety analyses. The respective evaluated data libraries still have shortcomings regarding the treatment of energy dependencies and uncertainty information. This work has been aimed at the development of a fission model for future fission product yield evaluations as well as its validation on the levels of cross-sections, fission product yields and time dependent decay radiation.
Download or read book Reactor Dosimetry State Of The Art 2008 Proceedings Of The 13th International Symposium written by Wim Voorbraak and published by World Scientific. This book was released on 2009-08-19 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives the state of the art in the field of reactor dosimetry as applied in nuclear power plants and research reactors. Surveillance programs are presented for nuclear power plants in Europe, including Russia and Ukraine, USA, Argentina and Korea. New cross-section measurements from most of the European, American and Japanese research reactors are reported. The latest developments in computer code development for radiation transport and shielding calculations, and radiation measurement techniques are also highlighted.
Download or read book KURRI Progress Report written by Kyōto Daigaku. Genshiro Jikkenjo and published by . This book was released on 2007 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boiling Water Reactors written by Koji Nishida and published by Elsevier. This book was released on 2023-01-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boiling Water Reactors, Volume Four in the JSME Series on Thermal and Nuclear Power Generation compiles the latest research in this very comprehensive reference that begins with an analysis of the history of BWR development and then moves through BWR plant design and innovations. The reader is guided through considerations for all BWR plant features and systems, including reactor internals, safety systems and plant instrumentation and control. Thermal-hydraulic aspects within a BWR core are analyzed alongside fuel analysis before comparisons of the latest BWR plant life management and maintenance technologies to promote safety and radiation protection practices are covered. The book's authors combine their in-depth knowledge and depth of experience in the field to analyze innovations and Next Generation BWRs, considering prospects for a variety of different BWRs, such as High-Conversion-BWRs, TRU-Burner Reactors and Economic Simplified BWRs. - Written by experts from the leaders and pioneers in nuclear research at the Japanese Society of Mechanical Engineers - Includes real examples and case studies from Japan, the US and Europe to provide a deeper learning opportunity with practical benefits - Considers societal impacts and sustainability concerns and goals throughout the discussion - Explores BWR plant design, thermal-hydraulic aspects, the reactor core and plant life management and maintenance in one complete resource
Download or read book Seminar On Fission written by Cyriel Wagemans and published by World Scientific. This book was released on 2010-10-11 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference is the seventh in a series of topical meetings dealing with the nuclear fission process, mainly at low excitation energy. During these meetings, actual topics are discussed by a group of experts. These proceedings give an overview of the topics treated, and permit a rapid overview of the current activities in the field.
Download or read book Experimental and analytical investigations on nuclear reactor safety severe accident phenomena and severe accident mitigation of nuclear power plants written by Yapei Zhang and published by Frontiers Media SA. This book was released on 2023-02-02 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
