Download or read book The Hydraulic Transport and Storage of Extractive Waste written by Mike Cambridge and published by Springer. This book was released on 2018-01-18 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the guidelines on long-term confinement of fine particulate waste products in a safe and environmentally acceptable location. It seeks to present the state of the art, drawing on combined experience from within the European Union (EU), on good international practice where relevant and on lessons learnt from recent untoward incidents. These guidelines have been developed in parallel with the development of the European Standard on Earthworks (prEN 16907) and the contents have been influenced by the well-publicised need for guidance to all stakeholders on both technical and regulatory aspects of the permitting, design and construction of extractive waste facilities in Europe. The Extractive Waste Directive (EWD) imposes a duty on all operators and regulators to ensure the competent design, operation and closure of such facilities. However, though some guidance has been published on a limited number of related technical elements, the relevance of these contributions has been diminished by the lack of an integrated approach. It is now evident to both regulatory bodies and operators alike that a unified and comprehensive document providing guidance to all stakeholders is required if the future of mining within the EU is to be assured and further untoward incidents avoided. These guidelines seek to address all technical stages of the development of a hydraulic fill project in the context of the EWD, with an emphasis on waste and facility characterisation and on the risk-based assessments which underwrite them. They are intended for use by all stakeholders involved in those European industries which involve the generation, transport and storage of fine particulate waste products requiring long-term confinement in a safe, stable and environmentally acceptable location.

Download or read book Hydraulic design and management of wastewater transport systems written by Michiel Tukker and published by IWA Publishing. This book was released on 2016-04-15 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Design and Management of Wastewater Transport Systems is a manual resulting from the research project CAPWAT (CAPacity loss in wasteWATer pressure pipelines), which researched the mechanisms for the creation, stagnation and discharge of gas bubbles in wastewater pressure pipelines. During this six-year research programme, it was recognised that there is no hydraulic manual/guideline that focuses on the entire wastewater pressure pipeline system, the processes it includes, and the interaction between the pressure pipeline and the pumping station. This manual provides a compilation of all the hydraulic knowledge that is necessary for designing a wastewater transport system and to manage it operationally. The wastewater transport system is the link between the collection and treatment of the wastewater and the collection system includes, among others, the gravity flow sewage system from the house (or consumer) and service connection through street and main sewers up to the suction basins. The transport system, for which this manual was written, includes the suction basin, the sewage pumping station and the pressure pipelines. Wastewater transport systems are becoming more complex due to building larger sewage water treatment plants, wastewater being transported over greater distances and increasingly more (and smaller) pipelines connecting to the main sewers. The operation of the pumping stations is largely determined by how the entire system behaves. Insight into this operation is, therefore, crucial for proper design and management. The central point of the design is to create an independent and safe system with the necessary transport capacity at minimum societal costs. Predominantly, the management aspect focuses on guidelines to maintain the design principles regarding capacity and required energy.

Download or read book The Hydraulic Transport of Solids by Pipeline written by Alan Gregory Bain and published by Pergamon. This book was released on 1970 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydraulic Transport of Solids in Pipes written by International Conference on the Hydraulic and published by . This book was released on 1986 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.

Download or read book SME Mineral Processing and Extractive Metallurgy Handbook written by Courtney A. Young and published by Society for Mining, Metallurgy & Exploration. This book was released on 2019-02-01 with total page 2258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This landmark publication distills the body of knowledge that characterizes mineral processing and extractive metallurgy as disciplinary fields. It will inspire and inform current and future generations of minerals and metallurgy professionals. Mineral processing and extractive metallurgy are atypical disciplines, requiring a combination of knowledge, experience, and art. Investing in this trove of valuable information is a must for all those involved in the industry—students, engineers, mill managers, and operators. More than 192 internationally recognized experts have contributed to the handbook’s 128 thought-provoking chapters that examine nearly every aspect of mineral processing and extractive metallurgy. This inclusive reference addresses the magnitude of traditional industry topics and also addresses the new technologies and important cultural and social issues that are important today. Contents Mineral Characterization and AnalysisManagement and ReportingComminutionClassification and WashingTransport and StoragePhysical SeparationsFlotationSolid and Liquid SeparationDisposalHydrometallurgyPyrometallurgyProcessing of Selected Metals, Minerals, and Materials

Download or read book The Hydraulic Transport of Solids in Pipes written by Wendy Anne Thornton and published by . This book was released on 1972 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Environmental Impacts of Hazardous Waste written by Rodolfo N. Salcedo and published by CRC Press. This book was released on 1989-05-30 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geo Economy of the Future written by Elena G. Popkova and published by Springer Nature. This book was released on 2022-06-07 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an international review of the modern geo-economy and a scientific take on the geo-economy of the future. It identifies the challenges of climate change and their impact on the modern geo-economy. Prospects for the geo-economy of the future are outlined based on sustainable agriculture and alternative energy. Policy implications are put forward to develop a geo-economy of the future in response to the challenges of climate change. The book presents management implications for the development of the geo-economy of the future in response to the challenges of climate change at the regional and global scale. It presents the lessons-learned through the COVID-19 pandemic, and applies experiences of countries with different environmental conditions for agriculture and the development of the energy sector. Based on these results, advanced practical recommendations and ready-made frameworks at the national, regional, and enterprise level are provided.

Download or read book Fossil Energy Update written by and published by . This book was released on 1977 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Papers Presented at the 6 International Conference on the Hydraulic Transport of Solids in Pipes written by International Conference on the Hydraulic Transport of Solids in Pipes and published by . This book was released on 1979 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pollution Abstracts written by and published by . This book was released on 1994 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: Indexes material from conference proceedings and hard-to-find documents, in addition to journal articles. Over 1,000 journals are indexed and literature published from 1981 to the present is covered. Topics in pollution and its management are extensively covered from the standpoints of atmosphere, emissions, mathematical models, effects on people and animals, and environmental action. Major areas of coverage include: air pollution, marine pollution, freshwater pollution, sewage and wastewater treatment, waste management, land pollution, toxicology and health, noise, and radiation.

Download or read book Papers Presented at the Fifth International Conference on the Hydraulic Transport of Solids in Pipes written by International Conference on the Hydraulic Transport of Solids in Pipes and published by . This book was released on 1978 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extractive Industries in Arid and Semi arid Zones written by Joachim Gratzfeld and published by IUCN. This book was released on 2003 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication aims to contribute to planning and management approaches that minimize land degradation and desertification in arid and semi-arid zones as a result of extractive industries operations. Both operational and policy guidance are included to help those government departments responsible for the licensing, planning and monitoring of extractive industries activities to take account of environment and development issues in their decision-making.

Download or read book Tools in Fluvial Geomorphology written by G. Mathias Kondolf and published by John Wiley & Sons. This book was released on 2016-04-28 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluvial Geomorphology studies the biophysical processes acting in rivers, and the sediment patterns and landforms resulting from them. It is a discipline of synthesis, with roots in geology, geography, and river engineering, and with strong interactions with allied fields such as ecology, engineering and landscape architecture. This book comprehensively reviews tools used in fluvial geomorphology, at a level suitable to guide the selection of research methods for a given question. Presenting an integrated approach to the interdisciplinary nature of the subject, it provides guidance for researchers and professionals on the tools available to answer questions on river restoration and management. Thoroughly updated since the first edition in 2003 by experts in their subfields, the book presents state-of-the-art tools that have revolutionized fluvial geomorphology in recent decades, such as physical and numerical modelling, remote sensing and GIS, new field techniques, advances in dating, tracking and sourcing, statistical approaches as well as more traditional methods such as the systems framework, stratigraphic analysis, form and flow characterisation and historical analysis. This book: Covers five main types of geomorphological questions and their associated tools: historical framework; spatial framework; chemical, physical and biological methods; analysis of processes and forms; and future understanding framework. Provides guidance on advantages and limitations of different tools for different applications, data sources, equipment and supplies needed, and case studies illustrating their application in an integrated perspective. It is an essential resource for researchers and professional geomorphologists, hydrologists, geologists, engineers, planners, and ecologists concerned with river management, conservation and restoration. It is a useful supplementary textbook for upper level undergraduate and graduate courses in Geography, Geology, Environmental Science, Civil and Environmental Engineering, and interdisciplinary courses in river management and restoration.

Download or read book Regulating Water Security in Unconventional Oil and Gas written by Regina M. Buono and published by Springer Nature. This book was released on 2019-10-31 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the need for deeper understanding of regulatory and policy regimes around the world in relation to the use of water for the production of ‘unconventional’ hydrocarbons, including shale gas, coal bed methane and tight oil, through hydraulic fracturing. Legal, policy, political and regulatory issues surrounding the use of water for hydraulic fracturing are present at every stage of operations. Operators and regulators must understand the legal, political and hydrological contexts of their surroundings, procure water for use in the fracturing and extraction processes, gain community cooperation or confront social resistance around water, collect flow back and produced water, and dispose of these wastewaters safely. By analysing and comparing different approaches to these issues from around the globe, this volume gleans insights into how policy, best practices and regulation may be developed to advance the interests of all stakeholders. While it is not always possible to easily transfer ‘good practice’ from one place to another, there is value in examining and understanding the components of different legal and regulatory regimes, as these may assist in the development of better regulatory law and policy for the rapidly growing unconventional energy sector. The book takes an interdisciplinary approach and includes chapters looking at water-energy nexus security in general, along with issue-focused and geographically-focused case studies written by scholars from around the world. Chapter topics, organized in conjunction with the stage of the shale gas production process upon which they touch, include the implications of hydraulic fracturing for agriculture, municipalities, and other stakeholders competing for water supplies; public opinion regarding use of water for hydraulic fracturing; potential conflicts between hydraulic fracturing and water as a human right; prevention of induced seismic activity, and the disposal or recycling of produced water. Several chapters also discuss implications of unconventional energy production for indigenous communities, particularly as regards sustainable water management. This volume will be of interest to scholars and students of energy and water, regulators and policymakers and operators interested in ensuring that they align with emergent best global practice.

Download or read book Sustainable Use of Water by Industry written by Cheryl Davis and published by IWA Publishing. This book was released on 2020-11-15 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Use of Water by Industry: Perspectives, Incentives, and Tools