Download or read book The FDA and Worldwide Current Good Manufacturing Practices and Quality System Requirements Guidebook for Finished Pharmaceuticals written by José Rodríguez Pérez and published by . This book was released on 2014 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The FDA and Worldwide Current Good Manufacturing Practices and Quality System Requirements Guidebook for Finished Pharmaceuticals written by José (Pepe) Rodríguez-Pérez and published by Quality Press. This book was released on 2014-04-30 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good Manufacturing Practices (GMP) for human pharmaceuticals affects every patient taking a medicine. GMP covers all aspects of the manufacturing process, from defining manufacturing processes to systems for recall and investigation of complaints. Consumers expect that each batch of medicines they take will meet quality standards so that they will be safe and effective. GMPs provide for systems that assure proper design, monitoring, and control of manufacturing processes and facilities. This formal system of controls at a pharmaceutical company, if adequately put into practice, helps to prevent instances of contamination, mix-ups, deviations, failures, and errors. This assures that drug products meet their quality standards. This guidance book is meant as a resource to manufacturers of pharmaceuticals, providing up-to-date information concerning required and recommended quality system practices. It should be used as a companion to the regulations/standards themselves and texts on the specific processes and activities contained within the QMS. As a bonus, this package contains dozens of FDA guidance documents as well as international harmonization documents (WHO, PIC/S, and ICH). A check list for GMP audit is also included based on risk management criteria. An exam complements the extra material.
Download or read book The FDA and Worldwide Current Good Manufacturing Practices and Quality System Requirements Guidebook for Finished Pharmaceuticals written by José Rodríguez-Pérez and published by Quality Press. This book was released on 2014-08-15 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guidance book is meant as a resource to manufacturers of pharmaceuticals, providing up-to-date information concerning required and recommended quality system practices. It should be used as a companion to the regulations/standards themselves and texts on the specific processes and activities contained within the QMS. This book includes chapters on US current Good Manufacturing Practice (GMP); international GMP; global GMP guides and harmonization; detailed analysis of the requirements and guidances; missing subparts; what inspectors are looking for; and the price of noncompliance. It also includes an appendix with two tabulated comparisons: the first compares US, European-PIC/S, Canadian, and WHO cGMPs, while the second compares US cGMPs with effective quality system elements. The companion CD contains cGMP regulations for sterile products produced by aseptic processing; it also includes updated data of statistical enforcement by the FDA, both domestically and abroad; a detailed glossary; and dozens of FDA guidance documents as well as international regulations (EU and Canada) and harmonization documents (WHO, PIC/S, and ICH). A very comprehensive checklist for a cGMP audit that is based on risk management criteria is also included. Finally, a comprehensive GMP exam is also included.
Download or read book The FDA and Worldwide Quality System Requirements Guidebook for Medical Devices written by Amiram Daniel and published by Quality Press. This book was released on 2008-01-01 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: How have recent changes in domestic and international regulations affected quality management in the development and marketing of medical devices in the US and abroad? Consultants Daniel and Kimmelman take a close look at the Quality System Regulation (QsReg), the ISO 13485: 2003 standard and the ISO/TR 14969: 2004 guidance document as well as a number of US Food and Drug Administration (FDA) and Global Harmonization Task Force (GHTF) guidance documents. The authors provide extensive commentary and notes an update their material to include such topics as the incorporation of principles of risk management into the medical device organizations' quality management systems (QMSs) and considerations of combination products. Daniel and Kimmelman include full coverage of the QSReg requirements, descriptions of comparable requirements in the ISO documents, excerpts of the FDA's responses to the QSReg preamble and excerpts from FDA guidance documents related to QMSs.
Download or read book The FDA and Worldwide Quality System Requirements Guide Book for Medical Devices written by Kimberly A. Trautman and published by ASQ Quality Press. This book was released on 1997 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides essential information regarding the new FDA regulation for medical devices and international quality system requirements (ISO 9001 and ISO/DIS 13485:1996). Icons quickly establish the differences and relationship between FDA regulation, the ISO 9001 standard, FDA guidance, and the Global Harmonization Task Force (GHTF) guidance. In addition, the end of each subsection includes blank pages for your notes. This book allows manufacturers to establish a single quality system that satisfies world requirements.
Download or read book The Certified Pharmaceutical GMP Professional Handbook written by Mark Allen Durivage and published by Quality Press. This book was released on 2016-05-23 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this handbook is to assist individuals for the Certified Pharmaceutical Good Manufacturing Practices Professional (CPGP) examination and provide a reference for the practitioner. The second edition reflects the Body of Knowledge which was updated in 2015. This edition has also incorporated additional information including updated references. The updates reflect the current trends and expectations of the evolving pharmaceutical industry driven by consumer expectations and regulatory oversight. This handbook covers compliance with good manufacturing practices (GMPs), as regulated and guided by national and international agencies for the pharmaceutical industry. It covers finished human and veterinary drugs and biologics, and combination devices, as well as their component raw materials (including active pharmaceutical ingredients (APIs) and excipients), and packaging and labeling operations.
Download or read book Quality written by Kathleen E. McCormick and published by Butterworth-Heinemann. This book was released on 2022-07-14 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality, second edition, provides comprehensive application of regulatory guidelines and quality concepts and methodologies related to pharmaceutical manufacturing. It is an excellent resource for practitioners, those pursuing pharmaceutical related certifications, and for students trying to learn more about pharmaceutical manufacturing. This book provides the background theory, applied descriptions of the guidelines and concepts, plus questions and problems at the end of the chapters that will help provide practice for the reader to apply the concepts. In this book the authors share their combined 60+ years of extensive practical experience in the industry and in process improvement combined with detailed understanding of the needs of the industry and education system. This book provides real-life examples from industry and guidelines for practical application of tools that can be referenced by operators, engineers, and management.This book is fully revised, updated, and expanded with new content in areas such as QbD, Lean, Six Sigma, basic data analysis, and CAPA tools. Fully revised, updated, and expanded new edition Features new topics such as QbD, Lean, Six Sigma, basic data analysis, and CAPA tools Includes end-of-chapter summaries and end-of-chapter question and/or problems Provides detailed steps and examples for applying the guidelines and quality tools Written in an accessible style making the content easy to understand and apply
Download or read book Handbook of Investigation and Effective CAPA Systems written by Jose (Pepe) Rodriguez-Perez and published by Quality Press. This book was released on 2022-02-15 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide regulatory agencies perform many inspections annually, and all too often investigation and CAPA system violations are at the top of the list of infractions. Life-sciences regulated companies (not only FDA-regulated ones) must ensure their investigation and CAPA systems look beyond the ‘usual suspects' to identify other quality issues in order to minimize risks (including safe ones) and reduce costs. Enhancements to this third edition include: A new section linking the investigation and CAPA programs with the overall quality culture of the company Fully updated, current versions of regulations including U.S. FDA, EU, ISO 9001, and ISO 13485 Updated inspectional observations from the U.S. FDA and U.K. MHRA A revised investigation and CAPA processes chapter, which has an improved barrier analysis section, including detailed flowcharts describing the barrier analysis process New charts and information related to the investigation of human errors; the human factor section includes information about training and competence A new chapter devoted to analytical laboratory investigations, including a section covering the invalidation of testing results Updated forms and examples of the different elements of the investigation and CAPA plan, including new case studies; a revised diagnostic tool used for investigating human error Jose(Pepe) Rodrguez-Perez, PhD, is president of Business Excellence Consulting, Inc., (BEC), a Puerto Rico-based, consulting, training, and remediation firm that focuses on the areas of regulatory compliance, FDA-regulatory training, and risk management. He is a biologist with a doctoral degree in biology from the University of Granada (Spain). Over his career, he has served as an educator, a technical services manager, and as a science advisor to the FDA.
Download or read book Practical Process Validation written by Mark Allen Durivage and published by Quality Press. This book was released on 2016-07-11 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the past decade, process validation issues ranked within the top six of Food and Drug Administration (FDA) form 483 observation findings issued each year. This poses a substantial problem for the medical device industry and is the reason why the authors wanted to write this book. The authors will share their collective knowledge: to help organizations improve patient safety and increase profitability while maintaining a state of compliance with regulations and standards. The intent of this book is to provide manufacturing quality professionals working in virtually any industry a quick, convenient, and comprehensive guide to properly conduct process validations that meet regulatory and certification requirements. It will aid quality technicians, engineers, managers, and others that need to plan, conduct, and monitor validation activities.
Download or read book Quality Risk Management in the FDA Regulated Industry written by José Rodríguez-Pérez and published by Quality Press. This book was released on 2017-02-21 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this new edition is to offer an updated view of the risk management field as it applies to medical products. Since the publication of the first edition (2012), the emphasis on risk-based processes has growth exponentially across all sectors, and risk management is now considered as significant as quality management. ISO 9001 was revised and now requires that top management promote the use of risk-based thinking. ISO 13485:2016, which specifies the requirements for a quality management system specific to the medical devices industry, also now shows a greater emphasis on risk management and risk-based decision making. In addition, the FDA Food Safety Modernization Act (FSMA) is the most important reform of U.S. food safety laws in more than 70 years. This indispensable book presents a systematic and comprehensive approach to quality risk management. It will assist medical and food product manufacturers with the integration of a risk management system or risk management principles and activities into their existing quality management system by providing practical explanations and examples. The appropriate use of quality risk management can facilitate compliance with regulatory requirements such as good manufacturing practice or good laboratory practice. All chapters have been updated and revised, and a new chapter has been added to discuss some of the most common pitfalls and misunderstandings regarding risk management, specifically those related to the use of FMEA as the only element of risk management programs. One of the appendices includes 12 case studies, and the companion CD-ROM contains dozens of U.S. FDA and European guidance documents as well as international harmonization documents (ICH and GHTF-IMDRF) related to risk management activities, as well as a 30-question exam (with answers) on the material discussed in the book.
Download or read book Pharmaceutical Quality Systems written by Oliver Schmidt and published by CRC Press. This book was released on 2000-04-30 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: When a pharmaceutical company decides to build a Quality System, it has to face the fact that there aren't any guideline that define exactly how such a system has to be built. With terms such as quality system, quality assurance, and quality management used interchangeably, even defining the system's objectives is a problem. This book provides a pr
Download or read book Current Good Manufacturing Practices written by Mindy J. Allport-Settle and published by PharmaLogika Books. This book was released on 2018-02-20 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: FDA Regulations and Associated Guidance Documents: - Code of Federal Regulation Title 21 Overview - Part 11 Electronic Records; Electronic Signatures (21CFR§11) and Guidance for Industry - Part 26 Mutual Recognition of Pharmaceutical Good Manufacturing Practice Reports, Medical Device Quality System Audit Reports, and Certain Medical Device Product Evaluation Reports: United States and The European Community (21CFR§26) - Part 200 Drugs: General (21CFR§200) - Part 207 Requirements for Foreign and Domestic Establishment Registration and Listing for Human Drugs, Including Drugs That Are Regulated Under a Biologics License Application, and Animal Drugs, and The National Drug Code (21CFR§207) - Part 210 Current Good Manufacturing Practice in Manufacturing, Processing, Packing, or Holding of Drugs; General (21CFR§210) - Part 211 Current Good Manufacturing Practice for Finished Pharmaceuticals (21CFR§211) - Part 600 Biological Products: General (21CFR§600) - Part 807 Establishment Registration and Device Listing for Manufacturers and Initial Importers of Devices (21CFR§807) - Part 820 Quality System Regulation (21CFR§820) - Part 11, Electronic Records; Electronic Signatures - Scope and Application - Guidance for Industry and FD A Staff: Current Good Manufacturing Practice Requirements for Combination Products - Guidance for Industry: CGMP for Phase 1 Investigational Drugs - Process Validation: General Principles and Practices - PAT - A Frame work for Innovative Pharmaceutical Development, Manufacturing, and Quality Assurance - Guidance for Industry: Quality Systems Approach to Pharmaceutical CGMP Regulations - Contract Manufacturing Arrangements for Drugs: Quality Agreements - Formal Dispute Resolution: Scientific and Technical Issues Related to Pharmaceutical CGMP - Formal Dispute Resolution: Sponsor Appeals Above the Division Level Reference Tools: - Glossaries combined in one location - GMP Keyword Index for 21CFR211 - Combined Index for all documents
Download or read book Good Clinical Laboratory and Manufacturing Practices written by Philip Carson and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality assurance and good laboratory practices are becoming essential knowledge for professionals in all sorts of industries. This includes internal and external audit procedures for compliance with the requirements of good clinical, laboratory and manufacturing practices. Spanning chemical, cosmetic and manufacturing industries, Good Clinical, Laboratory and Manufacturing Practices: Techniques for the QA professional is aimed at: chemists, clinicians, ecotoxicologists, operation managers, pharmaceutical process managers, quality assurance officers, technicians and toxicologists. In addition sections on harmonisation of quality systems will be of value to safety, health and environment advisors. This comprehensive and high level reference will be an indispensable guide to research laboratories in academia and industry. Additional training material is also included.
Download or read book Good Manufacturing Practices for Pharmaceuticals written by Joseph D. Nally and published by CRC Press. This book was released on 2016-04-19 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: With global harmonization of regulatory requirements and quality standards and national and global business consolidations ongoing at a fast pace, pharmaceutical manufacturers, suppliers, contractors, and distributors are impacted by continual change. Offering a wide assortment of policy and guidance document references and interpretations, this Sixth Edition is significantly expanded to reflect the increase of information and changing practices in CGMP regulation and pharmaceutical manufacturing and control practices worldwide. An essential companion for every pharmaceutical professional, this guide is updated and expanded by a team of industry experts, each member with extensive experience in industry or academic settings.
Download or read book Pharmaceutical Manufacturing Handbook written by Shayne Cox Gad and published by John Wiley & Sons. This book was released on 2008-04-04 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its coverage of Food and Drug Administration regulations, international regulations, good manufacturing practices, and process analytical technology, this handbook offers complete coverage of the regulations and quality control issues that govern pharmaceutical manufacturing. In addition, the book discusses quality assurance and validation, drug stability, and contamination control, all key aspects of pharmaceutical manufacturing that are heavily influenced by regulatory guidelines. The team of expert authors offer you advice based on their own firsthand experience in all phases of pharmaceutical manufacturing.
Download or read book Compact Regs Parts 820 written by Interpharm and published by CRC Press. This book was released on 2003-11-17 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents Current Good Manufacturing Practice (CGMP) requirements as set forth by the FDA. Supplemented with a handy keyword index, it provides, in a pocket-sized format, the complete and unaltered text of CFR Part 820. The index at the end of the book helps readers find the exact section of the reg they need. The comb binding makes it easy to use and the 3 3/4 inch by 5 1/2 inch size makes it easy to take from the desk top to the shop floor. It is a cost-effective tool for use in documented GMP training programs, for suppliers and vendors who need to be FDA compliant, and technicians who must secure adherence to US FDA regulations.
Download or read book Pharmaceutical Manufacturing Handbook written by Shayne Cox Gad and published by John Wiley & Sons. This book was released on 2008-03-21 with total page 1384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook features contributions from a team of expert authors representing the many disciplines within science, engineering, and technology that are involved in pharmaceutical manufacturing. They provide the information and tools you need to design, implement, operate, and troubleshoot a pharmaceutical manufacturing system. The editor, with more than thirty years' experience working with pharmaceutical and biotechnology companies, carefully reviewed all the chapters to ensure that each one is thorough, accurate, and clear.
