Download or read book The emerging Sr2FeMoO6 based electrocatalysts for solid oxide electrochemical cell synthesis modulation and applications written by Yuanfeng Liao and published by OAE Publishing Inc.. This book was released on 2024-03-05 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid oxide cells (SOCs) are regarded as a promising energy technology due to their large current density, diverse range of fuels, and high energy conversion efficiency. The double perovskite Sr2FeMoO6 (SFM) has attracted considerable attention for SOCs due to its tunable structure with superior performance of high conductivity, excellent thermal stability, and remarkable carbon deposition resistance in a reducing atmosphere. However, the electrocatalytic activity of SFM is considerably lower than that of commercial Ni-based SOC electrodes. A timely summary of the synthesis, modulation, and application of SFM perovskites is of great significance for its further development for SOCs. In this review, the methods employed in the preparation of SFM electrocatalysts are introduced first. Then, the advancements in the application of different SFM-based electrocatalysts in the field of SOCs are reviewed, and the research progress in the in-situ exsolution of SFM-based electrocatalysts through ion regulation is assessed. Finally, the future issues associated with SFM-based electrocatalysts are addressed in the realm of electrocatalysis, to advance their application.
Download or read book Solid Oxide Based Electrochemical Devices written by Massimiliano Lo Faro and published by Academic Press. This book was released on 2020-03-26 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Oxide-Based Electrochemical Devices: Advances, Smart Materials and Future Energy Applications provides a complete overview of the theoretical and applied aspects of energy-related solid oxide technologies. The book presents detailed thermodynamic and other basic requirements for fuel cells, electrolyzers, supercapacitors, batteries, sensors and air treatment devices. It delves into physical-chemical, electrochemical and mechanical properties of smart materials developed and offers insights into fundamental analysis and modeling. Detailed protocols for operation are suggested and discussed, including component development to optimize functionality, cost and upscaling. Practitioners in the fuel cell or power to gas industries, engineering researchers developing new technologies in those areas, and device and system designers can use the in-depth, structured information about the relationship between technologies and materials offered to make better-informed decisions during the planning and implementation of those technologies. Covers the theoretical concepts, components, advances and applications of solid oxide fuel cell, electrolyzer, battery, sensor and pollution abatement technologies Explores applications of new smart and metamaterials in the construction of energy-related solid oxide devices Presents examples of prototypes, including their cost estimate and requirements for large-scale production, integration and operation
Download or read book 3D Printing for Energy Applications written by Albert Tarancón and published by John Wiley & Sons. This book was released on 2021-03-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D PRINTING FOR ENERGY APPLICATIONS Explore current and future perspectives of 3D printing for the fabrication of high value-added complex devices 3D Printing for Energy Applications delivers an insightful and cutting-edge exploration of the applications of 3D printing to the fabrication of complex devices in the energy sector. The book covers aspects related to additive manufacturing of functional materials with applicability in the energy sector. It reviews both the technology of printable materials and 3D printing strategies itself, and its use in energy devices or systems. Split into three sections, the book covers the 3D printing of functional materials before delving into the 3D printing of energy devices. It closes with printing challenges in the production of complex objects. It also presents an interesting perspective on the future of 3D printing of complex devices. Readers will also benefit from the inclusion of: A thorough introduction to 3D printing of functional materials, including metals, ceramics, and composites An exploration of 3D printing challenges for production of complex objects, including computational design, multimaterials, tailoring AM components, and volumetric additive manufacturing Practical discussions of 3D printing of energy devices, including batteries, supercaps, solar panels, fuel cells, turbomachinery, thermoelectrics, and CCUS Perfect for materials scientists, 3D Printing for Energy Applications will also earn a place in the libraries of graduate students in engineering, chemistry, and material sciences seeking a one-stop reference for current and future perspectives on 3D printing of high value-added complex devices.
Download or read book Perovskite Materials written by Likun Pan and published by BoD – Books on Demand. This book was released on 2016-02-03 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes the current state of the know-how in the field of perovskite materials: synthesis, characterization, properties, and applications. Most chapters include a review on the actual knowledge and cutting-edge research results. Thus, this book is an essential source of reference for scientists with research fields in energy, physics, chemistry and materials. It is also a suitable reading material for graduate students.
Download or read book Progress in Solid Oxide Fuel Cells written by American Ceramic Society and published by Wiley-American Ceramic Society. This book was released on 2006-06-30 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work provides a collection of current research papers including valuable insights on materials-related aspects of solid-oxide fuel cells current status, processing and fabrication, various electrolytes, anodes, and cathodes, ceramic/metal interconnects, seal materials, mechanical properties, characterization, modeling, fuel reforming, component materials, materials processing, performance, stability, and more.
Download or read book Nitride Ceramics written by Alexander A. Gromov and published by John Wiley & Sons. This book was released on 2015-01-20 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of recent developments in the field of non-oxide ceramics with special emphasis placed on the combustion synthesis of group I-VI nitrides and oxynitrides. To ensure the widest possible perspective, the authors are experts in academia, industry, or government research, and each chapter discusses different synthetic methods and process parameters, as well as important material properties and applications. The result is invaluable reading for researchers and practitioners in the industry as well as those looking for an introduction to the field. It is equally of great interest to chemists and materials scientists as well as engineers working in the area of inorganic and solid-state chemistry, structural and functional materials, catalysis, metallurgy, and electrochemistry.
Download or read book Solid State Materials Chemistry written by Patrick M. Woodward and published by Cambridge University Press. This book was released on 2021-04 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and thorough treatment of the field for upper-level undergraduate and graduate courses in materials science and chemistry.
Download or read book Systems Electrochemistry written by I. Kiss and published by The Electrochemical Society. This book was released on 2015-04-30 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanomaterials for Biological and Medical Applications written by Sekhar Chandra Ray and published by Elsevier. This book was released on 2017-03-07 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials for Biological and Medical Applications explores the different applications of carbon nanomaterials in drug and gene therapies and their use in tissue regeneration, biosensor diagnosis, enantiomer separation of chiral drugs, extraction and analysis of drugs and pollutants, and as antitoxents. The book describes the synthesis processing of carbon nanomaterials, carbon composite nanomaterials, and their different biological and biomedical applications, including the removal of biologically toxic materials, optical biosensor applications, bio-imaging probe, drug delivery, cancer treatments, and other biomedical applications. Explains the major synthesis chemical process of carbon nanomaterials for biological applications Discusses how carbon nanomaterials can be practically used to create more efficient nanodevices in biosensing, medical imaging, and drug delivery Explores how the unique physical properties of carbon nanomaterials allows them to remove biologically toxic materials
Download or read book Photonic Probes of Surfaces written by P. Halevi and published by Newnes. This book was released on 2012-12-02 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted principally to optical spectroscopies of material surfaces and also encompasses scattering techniques and theoretical response analysis as well as spectroscopies. In addition to solid surfaces some attention is also devoted to interfaces between two solids, between a solid and a liquid and to a liquid-vapor interface. These surfaces may be clean and perfect, in which case the purpose of the spectroscopical method at hand is to determine the deviation of the atomic structure in the surface region from that in the bulk, namely the surface reconstruction. Otherwise the surface may be imperfect due to roughness, strain or overlayers, in which case the spectroscopy can yield information on the nature of such imperfections, including the monitoring of growth processes. One of the foremost purposes of surface spectroscopies is to extract information on atomic and molecular adsorbates on solid surfaces. Most of the 10 chapters are concerned with photonic sources of excitation, the respective spectral regions ranging from the far infrared to X-rays. In conclusion this book provides a state-of-the-art review of all major types of photonic probes of surfaces and interfaces and deals with both applications and experiment and theory.
Download or read book EXAFS and Near Edge Structure written by A. Bianconi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of X-ray spectroscopy using synchrotron radiation is growing so rapidly and expanding into such different research areas that it is now diffi cult to keep up with the literature. EXAFS and XANES are becoming interdis ciplinary methods used in solid-state physics, biology, and chemistry, and are making impressive contributions to these branches of science. The present book gives a panorama of the research activity in this field. It contains the papers presented at the International Conference on EXAFS and Near Edge Structure held in Frascati, Italy, September 13-17, 1982. This was the first international conference devoted to EXAFS spectroscopy (Extended X-ray Ab sorption Fine Structure) and its applications. The other topic of the con ference was the new XANES (X-ray Absorption Near Edge Structure), which in of experimental and theoretical developments finally appears to have terms left its infancy. The applications of EXAFS concern the determination of local structures in complex systems; we have therefore divided the subject matter into differ ent parts on various types of materials: amorphous metals, glasses, solu tions, biological systems, catalysts, and special crystals such as mixed valence systems and ionic conductors. EXAFS provides unique information for each kind of system, but the analysis of EXAFS data also poses special prob lems in each case. General problems of EXAFS data analysis are discussed, as well as developments in instrumentation for X-ray absorption using syn chrotron radiation and laboratory EXAFS.
Download or read book Interfacial Dynamics written by Nikola Kallay and published by CRC Press. This book was released on 2000-01-03 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: An examination of the theoretical foundations of the kinetics and thermodynamics of solid-liquid interfaces, as well as state-of-the-art industrial applications, this book presents information on surface and colloidal chemical processes and evaluates vital analytical tools such as atomic force microscopy, surface force apparatus measurements, and p
Download or read book Introduction to Solid State Theory written by Otfried Madelung and published by Springer. This book was released on 1997-05-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Solid-State Theory is a textbook for graduate students of physics and materials science. It also provides the theoretical background needed by physicists doing research in pure solid-state physics and its applications to electrical engineering. The fundamentals of solid-state theory are based on a description by delocalized and localized states and - within the concept of delocalized states - by elementary excitations. The development of solid-state theory within the last ten years has shown that by a systematic introduction of these concepts, large parts of the theory can be described in a unified way. This form of description gives a "pictorial" formulation of many elementary processes in solids, which facilitates their understanding.
Download or read book Silicene written by Michelle Spencer and published by Springer. This book was released on 2016-02-19 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current state-of-the art of single layer silicene up to thicker silicon nanosheets, and their structure, properties and potential applications. Silicene is a newly discovered material that is one atomic layer think. It is a two-dimensional (2D) nanomaterial that is classified as a nanosheet, which has large lateral dimensions up to micrometres, but thicknesses of only nanometres or less. Silicon nanosheets are currently a very ‘hot’ area of research. The unique properties and morphology of such materials make them ideal for a variety of applications, including electronic devices, batteries and sensors. 2D nanosheets of silicon can be considered as analogues of graphene. As silicon is already the major component of electronic devices, the significance of nanosheets composed of silicon is that they can be more easily integrated into existing electronic devices. Furthermore, if 2D nanostructured Si can be implemented into such devices, then their size could be reduced into the nano-regime, providing unique properties different from bulk Si that is currently employed. The book is written for researchers and graduate students.
Download or read book Nanostructured Materials written by Jackie Ying and published by Academic Press. This book was released on 2001-12-14 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thematic volume of Advances in Chemical Engineering presents the latest advances in the exciting interdisciplinary field of nanostructured materials. Written by chemical engineers, chemists, physicists, materials scientists, and bioengineers, this volume focuses on the molecular engineering of materials at the nanometer scale for unique size-dependent properties. It describes a "bottom-up" approach to designing nanostructured systems for a variety of chemical, physical, and biological applications.
Download or read book Electrogenerated Chemiluminescence written by Saima Parveen and published by Springer Science & Business Media. This book was released on 2013-09-05 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book primarily focuses on the fundamentals of and new developments in electrochemiluminescence (ECL), presenting high-quality content and explicitly aiming to summarize and disseminate the current state-of-the-art. The topics covered include the fundamental theory, mechanism, types of reactions involved, and the instrumental techniques. The book also examines the applications of ECL in many of the emerging fields of science, such as bioanalytical, analytical, clinical, pharmaceutical, forensic, military, microchip, μTAS, and LED. It will be invaluable to bioanalysts, drug analysts, pharmaceutical researchers and other professionals worldwide, as well as to other interested readers.
Download or read book Environmental Oriented Electrochemistry written by C.A.C. Sequeira and published by Elsevier. This book was released on 1994-06-06 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on the electrochemistry/environment relationship including, among others, chapters on design and operation of electrochemical reactors and separators, process simulation, development and scale-up, optimization and control of electrochemical processes applied to environmental problems, also including economic analysis, description of unique current and future applications, in addition to basic research into developing new technologies. It is hoped that this volume will be considered interesting and extremely timely to specialists in electrochemistry and environmental sciences.
