Download or read book TCP IP Embedded Internet Applications written by Edward Insam and published by Elsevier. This book was released on 2003-09-04 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing the technology from square one through real-world design applications, this book will significantly reduce R&D time - and spend. Eddie Insam's approach to the internet protocols TCP/IP is to explore their potential as a practical tool for design engineers building web communication and capabilities into embedded systems for the next generation of electronic products.Eddie Insam introduces the range of possibilities open to internet-enabled designs, including automated fault and low-stock notification, remote environmental control, control of test and measurement equipment, and programming responses based on data collected locally. These techniques are introduced as they key to a new level of interactivity between customer and manufacturer or service provider as well as a the means for users to communicate with electronic devices in increasingly useful and user-friendly ways. These new opportunities are introduced with the level of practical detail required for electronic designers getting to grips with turning the next phase of the internet revolution into reality.The scope of this book encompasses electronic design, networking applications and wireless applications using Bluetooth and 802.11 (WiFi). The case studies are not based on one specific device, but listings are provided where required.*An engineer's approach to internet protocols and applications*Reduces R&D time for design engineers*The design guide for the cutting edge of internet-enabled electronic products and systems

Download or read book Embedded Internet Design written by Al Williams and published by McGraw Hill Professional. This book was released on 2003 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: *Explores how to make microcontroller systems that are Internet-active*Covers both Java-enabled modules and stand-alone microcontroller designs*An excellent introduction to web technology basics for hardware designers.

Download or read book Designing Embedded Systems and the Internet of Things IoT with the ARM mbed written by Perry Xiao and published by John Wiley & Sons. This book was released on 2018-06-08 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and accessible introduction to the development of embedded systems and Internet of Things devices using ARM mbed Designing Embedded Systems and the Internet of Things (IoT) with the ARM mbed offers an accessible guide to the development of ARM mbed and includes a range of topics on the subject from the basic to the advanced. ARM mbed is a platform and operating system based on 32-bit ARM Cortex-M microcontrollers. This important resource puts the focus on ARM mbed NXP LPC1768 and FRDM-K64F evaluation boards. NXP LPC1768 has powerful features such as a fast microcontroller, various digital and analog I/Os, various serial communication interfaces and a very easy to use Web based compiler. It is one of the most popular kits that are used to study and create projects. FRDM-K64F is relatively new and largely compatible with NXP LPC1768 but with even more powerful features. This approachable text is an ideal guide that is divided into four sections; Getting Started with the ARM mbed, Covering the Basics, Advanced Topics and Case Studies. This getting started guide: Offers a clear introduction to the topic Contains a wealth of original and illustrative case studies Includes a practical guide to the development of projects with the ARM mbed platform Presents timely coverage of how to develop IoT applications Designing Embedded Systems and the Internet of Things (IoT) with the ARM mbed offers students and R&D engineers a resource for understanding the ARM mbed NXP LPC1768 evaluation board.

Download or read book Designing Embedded Internet Devices written by Dan Eisenreich and published by Newnes. This book was released on 2003 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded internet and internet appliances are the focus of great attention in the computing industry, as they are seen as the future of computing. The design of such devices presents many technical challenges. This book is the first guide available that describes how to design internet access and communications capabilities into embedded systems. It takes an integrated hardware/software approach using the Java programming language and industry-standard microcontrollers. Numerous illustrations and code examples enliven the text. This book shows how to build various sensors and control devices that connect to the TINI interfaces, explains how to write programs that control them in Java, and then ties them all together in practical applications. Included is a discussion on how these technologies work, where to get detailed specifications, and ideas for the reader to pursue beyond the book. The first guide to designing internet access and communications capabilities into embedded systems Takes an integrated hardware/software approach using the Java programming language an industry-standard

Download or read book The Embedded Internet written by Sergio Scaglia and published by Addison-Wesley Professional. This book was released on 2007 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demonstrates the benefits of internet enabled embedded systems using real-world applications. This work examines the techniques required to achieve internet connectivity, starting with how to draw upon those TCP/IP implementations which already exist, right through to developing fresh ones. It also includes a CD-ROM with the TCP/IP stack.

Download or read book Ethnography for the Internet written by Christine Hine and published by Routledge. This book was released on 2020-05-11 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The internet has become embedded into our daily lives, no longer an esoteric phenomenon, but instead an unremarkable way of carrying out our interactions with one another. Online and offline are interwoven in everyday experience. Using the internet has become accepted as a way of being present in the world, rather than a means of accessing some discrete virtual domain. Ethnographers of these contemporary Internet-infused societies consequently find themselves facing serious methodological dilemmas: where should they go, what should they do there and how can they acquire robust knowledge about what people do in, through and with the internet?This book presents an overview of the challenges faced by ethnographers who wish to understand activities that involve the internet. Suitable for both new and experienced ethnographers, it explores both methodological principles and practical strategies for coming to terms with the definition of field sites, the connections between online and offline and the changing nature of embodied experience. Examples are drawn from a wide range of settings, including ethnographies of scientific institutions, television, social media and locally based gift-giving networks.

Download or read book 6LoWPAN written by Zach Shelby and published by Wiley. This book was released on 2009-11-04 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: "It is stunningly thorough and takes readers meticulously through the design, configuration and operation of IPv6-based, low-power, potentially mobile radio-based networking." Vint Cerf, Vice President and Chief Internet Evangelist, Google This book provides a complete overview of IPv6 over Low Power Wireless Area Network (6LoWPAN) technology In this book, the authors provide an overview of the 6LoWPAN family of standards, architecture, and related wireless and Internet technology. Starting with an overview of the IPv6 ‘Internet of Things’, readers are offered an insight into how these technologies fit together into a complete architecture. The 6LoWPAN format and related standards are then covered in detail. In addition, the authors discuss the building and operation of 6LoWPAN networks, including bootstrapping, routing, security, Internet ingration, mobility and application protocols. Furthermore, implementation aspects of 6LoWPAN are covered. Key Features: Demonstrates how the 6LoWPAN standard makes the latest Internet protocols available to even the most minimal embedded devices over low-rate wireless networks Provides an overview of the 6LoWPAN standard, architecture and related wireless and Internet technology, and explains the 6LoWPAN protocol format in detail Details operational topics such as bootstrapping, routing, security, Internet integration, mobility and application protocols Written by expert authors with vast experience in the field (industrial and academic) Includes an accompanying website containing tutorial slides, course material and open-source code with examples (http://6lowpan.net ) 6LoWPAN: The Wireless Embedded Internet is an invaluable reference for professionals working in fields such as telecommunications, control, and embedded systems. Advanced students and teachers in electrical engineering, information technology and computer science will also find this book useful.

Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.

Download or read book Embedded Ethernet and Internet Complete written by Jan Axelson and published by lakeview research llc. This book was released on 2003 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Create tiny web servers and use TCP/IP to communicate over local networks and the Internet.

Download or read book Embedded Firmware Solutions written by Vincent Zimmer and published by Apress. This book was released on 2015-02-03 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Firmware Solutions is the perfect introduction and daily-use field guide--for the thousands of firmware designers, hardware engineers, architects, managers, and developers--to Intel’s new firmware direction (including Quark coverage), showing how to integrate Intel® Architecture designs into their plans. Featuring hands-on examples and exercises using Open Source codebases, like Coreboot and EFI Development Kit (tianocore) and Chromebook, this is the first book that combines a timely and thorough overview of firmware solutions for the rapidly evolving embedded ecosystem with in-depth coverage of requirements and optimization.

Download or read book Embedded System Interfacing written by Marilyn Wolf and published by Morgan Kaufmann. This book was released on 2019-02-08 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded System Interfacing: Design for the Internet-of-Things (IoT) and Cyber-Physical Systems (CPS) takes a comprehensive approach to the interface between embedded systems and software. It provides the principles needed to understand how digital and analog interfaces work and how to design new interfaces for specific applications. The presentation is self-contained and practical, with discussions based on real-world components. Design examples are used throughout the book to illustrate important concepts. This book is a complement to the author's Computers as Components, now in its fourth edition, which concentrates on software running on the CPU, while Embedded System Interfacing explains the hardware surrounding the CPU. - Provides a comprehensive background in embedded system interfacing techniques - Includes design examples to illustrate important concepts and serve as the basis for new designs - Discusses well-known, widely available hardware components and computer-aided design tools

Download or read book Embedded Software for the IoT written by Klaus Elk and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-12-03 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a mixture of theory, examples, and well-integrated figures, Embedded Software for the IoT helps the reader understand the details in the technologies behind the devices used in the Internet of Things. It provides an overview of IoT, parameters of designing an embedded system, and good practice concerning code, version control and defect-tracking needed to build and maintain a connected embedded system. After presenting a discussion on the history of the internet and the word wide web the book introduces modern CPUs and operating systems. The author then delves into an in-depth view of core IoT domains including: Wired and wireless networking Digital filters Security in embedded and networked systems Statistical Process Control for Industry 4.0 This book will benefit software developers moving into the embedded realm as well as developers already working with embedded systems.

Download or read book Designing the Internet of Things written by Adrian McEwen and published by John Wiley & Sons. This book was released on 2013-12-09 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Take your idea from concept to production with this unique guide Whether it's called physical computing, ubiquitous computing, or the Internet of Things, it's a hot topic in technology: how to channel your inner Steve Jobs and successfully combine hardware, embedded software, web services, electronics, and cool design to create cutting-edge devices that are fun, interactive, and practical. If you'd like to create the next must-have product, this unique book is the perfect place to start. Both a creative and practical primer, it explores the platforms you can use to develop hardware or software, discusses design concepts that will make your products eye-catching and appealing, and shows you ways to scale up from a single prototype to mass production. Helps software engineers, web designers, product designers, and electronics engineers start designing products using the Internet-of-Things approach Explains how to combine sensors, servos, robotics, Arduino chips, and more with various networks or the Internet, to create interactive, cutting-edge devices Provides an overview of the necessary steps to take your idea from concept through production If you'd like to design for the future, Designing the Internet of Things is a great place to start.

Download or read book Node js for Embedded Systems written by Patrick Mulder and published by "O'Reilly Media, Inc.". This book was released on 2016-10-10 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: How can we build bridges from the digital world of the Internet to the analog world that surrounds us? By bringing accessibility to embedded components such as sensors and microcontrollers, JavaScript and Node.js might shape the world of physical computing as they did for web browsers. This practical guide shows hardware and software engineers, makers, and web developers how to talk in JavaScript with a variety of hardware platforms. Authors Patrick Mulder and Kelsey Breseman also delve into the basics of microcontrollers, single-board computers, and other hardware components. Use JavaScript to program microcontrollers with Arduino and Espruino Prototype IoT devices with the Tessel 2 development platform Learn about electronic input and output components, including sensors Connect microcontrollers to the Internet with the Particle Photon toolchain Run Node.js on single-board computers such as Raspberry Pi and Intel Edison Talk to embedded devices with Node.js libraries such as Johnny-Five, and remotely control the devices with Bluetooth Use MQTT as a message broker to connect devices across networks Explore ways to use robots as building blocks for shared experiences

Download or read book Tools and Technologies for the Development of Cyber Physical Systems written by Balandin, Sergey and published by IGI Global. This book was released on 2019-12-27 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the continual development of professional industries in today’s modernized world, certain technologies have become increasingly applicable. Cyber-physical systems, specifically, are a mechanism that has seen rapid implementation across numerous fields. This is a technology that is constantly evolving, so specialists need a handbook of research that keeps pace with the advancements and methodologies of these devices. Tools and Technologies for the Development of Cyber-Physical Systems is an essential reference source that discusses recent advancements of cyber-physical systems and its application within the health, information, and computer science industries. Featuring research on topics such as autonomous agents, power supply methods, and software assessment, this book is ideally designed for data scientists, technology developers, medical practitioners, computer engineers, researchers, academicians, and students seeking coverage on the development and various applications of cyber-physical systems.

Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2003 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an overview of embedded system design and relates the most important topics in the field to each other.

Download or read book Embedded Systems Architecture written by Tammy Noergaard and published by Newnes. This book was released on 2012-12-31 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems Architecture is a practical and technical guide to understanding the components that make up an embedded system's architecture. This book is perfect for those starting out as technical professionals such as engineers, programmers and designers of embedded systems; and also for students of computer science, computer engineering and electrical engineering. It gives a much-needed 'big picture' for recently graduated engineers grappling with understanding the design of real-world systems for the first time, and provides professionals with a systems-level picture of the key elements that can go into an embedded design, providing a firm foundation on which to build their skills. - Real-world approach to the fundamentals, as well as the design and architecture process, makes this book a popular reference for the daunted or the inexperienced: if in doubt, the answer is in here! - Fully updated with new coverage of FPGAs, testing, middleware and the latest programming techniques in C, plus complete source code and sample code, reference designs and tools online make this the complete package - Visit the companion web site at http://booksite.elsevier.com/9780123821966/ for source code, design examples, data sheets and more - A true introductory book, provides a comprehensive get up and running reference for those new to the field, and updating skills: assumes no prior knowledge beyond undergrad level electrical engineering - Addresses the needs of practicing engineers, enabling it to get to the point more directly, and cover more ground. Covers hardware, software and middleware in a single volume - Includes a library of design examples and design tools, plus a complete set of source code and embedded systems design tutorial materials from companion website