Download or read book The Elastic Properties of Wood written by D. V. Doyle and published by . This book was released on 1946 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Properties and Processing written by Miha Humar and published by MDPI. This book was released on 2020-05-23 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood-based materials are CO2-neutral, renewable, and considered to be environmentally friendly. The huge variety of wood species and wood-based composites allows a wide scope of creative and esthetic alternatives to materials with higher environmental impacts during production, use and disposal. Quality of wood is influenced by the genetic and environmental factors. One of the emerging uses of wood are building and construction applications. Modern building and construction practices would not be possible without use of wood or wood-based composites. The use of composites enables using wood of lower quality for the production of materials with engineered properties for specific target applications. Even more, the utilization of such reinforcing particles as carbon nanotubes and nanocellulose enables development of a new generation of composites with even better properties. The positive aspect of decomposability of waste wood can turn into the opposite when wood or wood-based materials are exposed to weathering, moisture oscillations, different discolorations, and degrading organisms. Protective measures are therefore unavoidable for many outdoor applications. Resistance of wood against different aging factors is always a combined effect of toxic or inhibiting ingredients on the one hand, and of structural, anatomical, or chemical ways of excluding moisture on the other.
Download or read book Timber written by H E Desch and published by CRC Press. This book was released on 1996-06-13 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: For nearly 60 years, Timber: Structure, Properties, Conversion, and Use has been the authoritative text on timber technology. Now in its seventh edition, this book remains a vital resource, providing accurate, comprehensive, and fact-driven information for students and professionals in the field. From basic coverage of timber structure, properties, processing, and utilization, to more in-depth scientific investigations, this book covers all the issues and topics of concern to readers with a wide range of levels of sophistication. Timber technology has not stood still since the last revision; Timber: Structure, Properties, Conversion, and Use has kept the pace, exploring such high-tech topics as computer-aided wood identification and log conversion, radio frequency drying of wood, enhancement of wood with plastics, application of preservatives with high-pressure vacuum systems, and the development and application of flame-retardant solutions. Other timely updates include enlarging the chapter on mechanical performance to cover elastic behavior, toughness, and the use of structural-sized timber for strength tests. The chapter on board materials has also been extensively updated and enlarged to include information on new boards and structural composites that have emerged since the last edition. One of the most important strengths of Timber: Structure, Properties, Conversion, and Use is its versatility as a reference for timber professionals while remaining approachable to students in the field. Evidence of the book?s comprehensiveness and versatility becomes clear as it teaches readers about such wide-ranging topics as: identification and nomenclature of timbers variability in cellular features between species principal chemical constituents in timber structural variability caused by natural defects such as bark pockets, resin streaks, and brittleheart determination of density and moisture content in timber thermal and acoustic properties of wood conversion equipment such as circular saws, band saws, frame saws, and chipper canters health and safety issues in the industry adhesives, metal connectors, and joint design forest and millyard pests application of preservatives and finishes From basic identification and timber nomenclature to methods of sap displacement and tests of electrical conductivity, Timber: Structure, Properties, Conversion, and Use covers it all. And while it is no longer possible for any one individual to write authoritatively on every aspect of timber technology, embracing as it does structure, properties, conversion, utilization, and behavior in service, J. M. Dinwoodie has gathered expert opinions and expanded on original author H. E. Desch?s approach and vision to continue to provide the authoritative text on timber technology.
Download or read book Fracture and Fatigue in Wood written by Ian Smith and published by John Wiley & Sons. This book was released on 2003-06-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damage in wood is principally the result of fatigue. Fatigue is the process of progressive localised irreversible change in a material, and may culminate in cracks or complete fracture if conditions that initiated or propagated the process persist. Comprehensive understanding of fatigue and fracture in engineered wood components must be founded on a proper understanding of the damage processes. Although wood is the world's most widely used structural material, whether measured by volume consumed or value of finished construction, its behaviour is not well understood even by people who have spent their careers studying it. * What is known about failure processes comes almost entirely from empirical evidence collected for engineering purposes. * Hypotheses about behaviour of wood are based on macroscopic observation of specimens during and following tests. * With only limited resources and the need to obtain practical results quickly, the timber engineering research community has steered away from the scientific approach. * Forestry practices are changing and are known to influence characteristics of wood cells therefore there is a need to periodically reassess the mechanical properties of visually graded lumber the blackbox approach. Fatigue and Fracture of Wood examines the above issues from a scientific point of view by drawing on the authors' own research as well as previously published material. Unlike the empirical research, the book begins by examining growth of wood. It briefly examines its structure in relation to how trees grow, before assessing the fatigue and fracture of wood and discussing the scientific methods of modelling fatigue. * Covers from macro to micro behaviour of wood * Presents direct evidence of how wood fractures using Scanning Electron Microscopy * The first book to present a physically correct model for fracture in wood * Provides experimental proof of so-called memory in wood (i.e. dependence of fatigue behaviour on the loading sequence) * Givse practical illustrations of how theories and models can be applied in practice An essential resource for wood scientists/engineers, timber-engineering practitioners, and graduate students studying wood and solid mechanics.
Download or read book Mechanics of Wood and Wood Composites written by Jozsef Bodig and published by . This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Biology of Reaction Wood written by Barry Gardiner and published by Springer Science & Business Media. This book was released on 2014-01-08 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a fundamental reference source on reaction wood for wood scientists and technologists, plant biologists, silviculturists, forest ecologists, and anyone involved in the growing of trees and the processing of wood. It brings together our current understanding of all aspects of reaction wood, and is the first book to discuss both compression wood and tension wood. Trees produce reaction wood to maintain the vertical orientation of their stems and the optimum angle of each branch. They achieve this by laying down fibre cell walls in which differences in physical and chemical structure from those of normal fibres are expressed as differential stresses across the stem or branch. This process, while of obvious value for the survival of the tree, causes serious problems for the utilisation of timber. Timber derived from trees containing significant amounts of reaction wood is subject to dimensional instability on drying, causing twisting, bending and splitting. It is also difficult to work as timber, and for the pulp and paper industry the cost of removing the increased amount of lignin in compression wood is substantial. This has both practical and economic consequences for industry. Understanding the factors controlling reaction wood formation and its effect on wood structure is therefore fundamental to our understanding of the adaptation of trees to their environment and to the sustainable use of wood. The topics covered include: -Morphology, anatomy and ultrastructure of reaction wood -Cell-wall polymers in reaction wood and their biosynthesis -Changes in tree proteomes during reaction wood formation -The biomechanical action and biological functions of reaction wood - Physical and mechanical properties of reaction wood from the scale of cell walls to planks -The detection and characterisation of compression wood -Effects of reaction wood on the performance of wood and wood-based products - Commercial implications of reaction wood and the influence of forest management on its formation
Download or read book Wood written by Dietrich Fengel and published by Walter de Gruyter. This book was released on 2011-08-02 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Structural Elements with Tropical Hardwoods written by Abel O. Olorunnisola and published by Springer. This book was released on 2017-08-31 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides basic information on the design of structures with tropical woods. It is intended primarily for teaching university- and college-level courses in structural design. It is also suitable as a reference material for practitioners. Although parts of the background material relate specifically to West and East Africa, the design principles apply to the whole of tropical Africa, Latin America and South Asia. The book is laced with ample illustrations including photographs of real life wood structures and structural elements across Africa that make for interesting reading. It has numerous manual and Excel spread sheet worked examples and review questions that can properly guide a first-time designer of wooden structural elements. A number of design problems are also solved using the FORTRAN programming language. Topics covered in the thirteen chapters of the book include a brief introduction to the book, the anatomy and physical properties of tropical woods; a bri ef review of the mechanical properties of wood, timber seasoning and preservation, uses of wood and wood products in construction; basic theory of structures, and structural load computations; design of wooden beams, solid and built-up wooden columns, wood connections and wooden trusses; as well as a brief introduction to the design of wooden bridges.
Download or read book Handbook of Elastic Properties of Solids Liquids and Gases Four Volume Set written by Moises Levy and published by Academic Press. This book was released on 2000-10-23 with total page 2513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sound waves propagate through galactic space, through two-dimensional solids, through biological systems, through normal and dense stars, and through everything that surrounds us; the earth, the sea, and the air. We use sound to locate objects, to identify objects, to understand processes going on in nature, to communicate, and to entertain. The elastic properties of materials determine the velocity of sound in them and tell us about their response to stresses something which is very important when we are trying to construct, manufacture, or create something with any material. The Handbook of Elastic Properties of Materials will provide these characteristics for almost everything whose elastic properties has ever been measured or deduced in a concise and approachable manner. Leading experts will explain the significance of the elastic properties as they relate to intrinsic microscopic behavior, to manufacturing, to construction, or to diagnosis. They will discuss the propagation of sound in newly discovered or created materials, and in common materials which are being investigated with a fresh outlook. The Handbook will provide the reader with the elastic properties of the common and mundane, the novel and unique, the immense and the microscopic, and the exhorbitantly dense and the ephemeral.. You will also find the measurement. And theoretical techniques that have been developed and invented in order to extract these properties from a reluctant nature and recalcitrant systems. Key Features * Solids, liquids and gases covered in one handbook * Articles by experts describing insights developed over long and Illustrious careers * Properties of esoteric substances, such as normal and dense stars, superfluid helium three, fullerness, two dimensional solids, extraterrestial substances, gems and planetary atmospheres * Properties of common materials such as food, wood used for musical instruments, paper, cement, and cork * Modern dynamic elastic properties measurement techniques
Download or read book Structure and Properties of Wood Polymer Composites WPC written by Alexander Askadskii and published by Cambridge Scholars Publishing. This book was released on 2019-03-05 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: At present, the use of polymer composites filled with wood (WPC) is becoming increasingly popular. In particular, flooring of terraced premises, siding, decorative fences, fence systems, steps, universal profiles, among others are made from WPC. In 1977, the first enterprise for the production of WPC appeared in Sweden. The first experience was not very successful – the demand turned out to be low, and the wear of technological equipment was very high. Therefore, developments in this field were resumed only in the 1990s and continue to this day. This book describes the basic physical and mechanical properties of modern WPC, such as tensile and compression strength, and hardness. Also, the influence of climatic factors on the performance properties of products from WPC is described, while the thermal and rheological properties of WPC materials are considered, which directly affect the consumer characteristics of the products. The book contains theoretical developments related to the prediction of the mechanical and thermal properties of polymers and composites. The Van der Waals volume and the energy of the intermolecular interaction are estimated. This book will be of interest to representatives of the WPC market, designers, and architects, as well as technology engineers, students and post-graduate students of higher educational institutions in the fields of chemistry and physics of composite polymer materials.
Download or read book Handbook of Wood Chemistry and Wood Composites written by Roger M. Rowell and published by CRC Press. This book was released on 2005-02-18 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The degradable nature of high-performance, wood-based materials is an attractive advantage when considering environmental factors such as sustainability, recycling, and energy/resource conservation. The Handbook of Wood Chemistry and Wood Composites provides an excellent guide to the latest concepts and technologies in wood chemistry and bio-based composites. The book analyzes the chemical composition and physical properties of wood cellulose and its response to natural processes of degradation. It describes safe and effective chemical modifications to strengthen wood against biological, chemical, and mechanical degradation without using toxic, leachable, or corrosive chemicals. Expert researchers provide insightful analyses of the types of chemical modifications applied to polymer cell walls in wood, emphasizing the mechanisms of reaction involved and resulting changes in performance properties. These include modifications that increase water repellency, fire retardancy, and resistance to ultraviolet light, heat, moisture, mold, and other biological organisms. The text also explores modifications that increase mechanical strength, such as lumen fill, monomer polymer penetration, and plasticization. The Handbook of Wood Chemistry and Wood Composites concludes with the latest applications, such as adhesives, geotextiles, and sorbents, and future trends in the use of wood-based composites in terms of sustainable agriculture, biodegradability and recycling, and economics. Incorporating over 30 years of teaching experience, the esteemed editor of this handbook is well-attuned to educational demands as well as industry standards and research trends.
Download or read book Continuum Micromechanics written by P. Suquet and published by Springer. This book was released on 2014-05-04 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent progress of fundamental nature made in the new developed field of micromechanics: transformation field analysis, variational bounds for nonlinear composites, higher-order gradients in micromechanical damage models, dynamics of composites, pattern based variational bounds.
Download or read book Full Field Measurements and Identification in Solid Mechanics written by Michel Grediac and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely book presents cutting-edge developments by experts in the field on the rapidly developing and scientifically challenging area of full-field measurement techniques used in solid mechanics – including photoelasticity, grid methods, deflectometry, holography, speckle interferometry and digital image correlation. The evaluation of strains and the use of the measurements in subsequent parameter identification techniques to determine material properties are also presented. Since parametric identification techniques require a close coupling of theoretical models and experimental measurements, the book focuses on specific modeling approaches that include finite element model updating, the equilibrium gap method, constitutive equation gap method, virtual field method and reciprocity gap method. In the latter part of the book, the authors discuss two particular applications of selected methods that are of special interest to many investigators: the analysis of localized phenomenon and connections between microstructure and constitutive laws. The final chapter highlights infrared measurements and their use in the mechanics of materials. Written and edited by knowledgeable scientists, experts in their fields, this book will be a valuable resource for all students, faculties and scientists seeking to expand their understanding of an important, growing research area
Download or read book Strength moisture Relations for Wood written by Thomas Randall Carson Wilson and published by . This book was released on 1932 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Elastic Properties of Solids Liquids and Gases Elastic properties of solids theory elements and compounds novel materials technological materials alloys and building materials written by Moises Levy and published by . This book was released on 2001 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will discuss the propagation of sound in newly discovered or created materials, and in common materials which are being investigated with a fresh outlook. This four-volume set is intended for university industrial and government libraries serving engineering and research personnel working in acoustics. (Midwest).
Download or read book Microporomechanics written by Luc Dormieux and published by John Wiley & Sons. This book was released on 2006-08-14 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended as a first introduction to the micromechanics of porous media, this book entitled “Microporomechanics” deals with the mechanics and physics of multiphase porous materials at nano and micro scales. It is composed of a logical and didactic build up from fundamental concepts to state-of-the-art theories. It features four parts: following a brief introduction to the mathematical rules for upscaling operations, the first part deals with the homogenization of transport properties of porous media within the context of asymptotic expansion techniques. The second part deals with linear microporomechanics, and introduces linear mean-field theories based on the concept of a representative elementary volume for the homogenization of poroelastic properties of porous materials. The third part is devoted to Eshelby’s problem of ellipsoidal inclusions, on which much of the micromechanics techniques are based, and illustrates its application to linear diffusion and microporoelasticity. Finally, the fourth part extends the analysis to microporo-in-elasticity, that is the nonlinear homogenization of a large range of frequently encountered porous material behaviors, namely, strength homogenization, nonsaturated microporomechanics, microporoplasticity and microporofracture and microporodamage theory.
Download or read book The Mechanical Properties of Wood written by Samuel J. Record and published by . This book was released on 2018-10-03 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mechanical Properties of WoodBy Samuel J. RecordUnlike some other reproductions of classic texts (1) We have not used OCR(Optical Character Recognition), as this leads to bad quality books with introduced typos. (2) In books where there are images such as portraits, maps, sketches etc We have endeavoured to keep the quality of these images, so they represent accurately the original artefact. Although occasionally there may be certain imperfections with these old texts, we feel they deserve to be made available for future generations to enjoy.
