Download or read book The Effect of Sea Water Temperature on Corrosion Fatigue Crack Growth in Structural Steels written by O. Vosikovsky and published by . This book was released on 1983 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Corrosion by Sea Water on the Fatigue Crack Growth Characteristics of a Structural Steel in Constant Axial and Bending Load Tests written by R. Johnson and published by . This book was released on 1978 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Slow Corrosion Fatigue Crack Growth in a Structural Steel in Artificial Sea Water at Different Potentials Crack Depths and Loading Frequencies written by E. Bardal and published by . This book was released on 1978 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue Crack Growth in A36 A283 Plate in Air and Sea Water Environments written by F. R. Stonesifer and published by . This book was released on 1981 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive use of A36 type steels in wave-excited marine structures raises the question of its resistance to fatigue crack propagation in the sea water environment. Above its ductile-brittle transition temperature, static fracture of such a low strength steel usually entails extensive plastic deformation. However with cyclic loading, fatigue cracks can grow with little plastic flow, at crack loading levels well below that required for fracture instability. The hazard entailed has the positive benefit of allowing linear elastic fracture mechanics to be utilized in applying test data to problems of structural life prediction. To this end, this paper report crack growth data on A36 plate at laboratory temperature in air and in synthetic sea water. Two extremes of mean stress or stress ratio R=0 and 0.8 typify the ordinary condition as well as growth in the residual stress field of a constrained weld. Varied cyclic frequencies as low as 0.1 Hz reach as low the natural sway frequencies of very large structures at sea. The new data is compared with literature data from other structural steels using fitting parameters of the NRL tensile ligament instability model for crack propagation. Results indicate that no relief from corrosion fatigue effects is derived from the relatively low yield strength level of this steel. (Author).

Download or read book Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments written by Andreas Momber and published by Academic Press. This book was released on 2024-04-06 with total page 777 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments: Volume 1: Introduction and Corrosive Loads offers the first comprehensive review on corrosion and corrosion protection of offshore wind power structures. The book provides extensive discussion on corrosion phenomena and types in different marine corrosion zones, including the modeling of corrosion processes and interactions between corrosion and structural stability. The book addresses important design issues, namely materials selection relative to performance in marine environments, corrosion allowance, and constructive design. Active and passive corrosion protection measures are emphasized, with special sections on cathodic corrosion protection and the use of protective coatings. Seawater related issues associated with cathodic protection, such as calcareous deposit formation, hydrogen formation and fouling, are discussed. With respect to protective coatings, the book considers for the first time complete loading scenarios, including corrosive loads, mechanical loads, and special loads, and covers a wide range of coating materials. Problems associated with fouling and bacterial-induced corrosion are extensively reviewed. The book closes with a chapter on recent developments in maintenance strategies, inspection techniques, and repair technologies. The book is of special interest to materials scientists, materials developers, corrosion engineers, maintenance engineers, civil engineers, steel work designers, mechanical engineers, marine engineers. Offshore wind power is an emerging renewable technology and a key factor for a cleaner environment. Offshore wind power structures are situated in a demanding and challenging marine environment. The structures are loaded in a complex way, including mechanical loads and corrosive loads. Corrosion is one of the major limiting factors to the reliability and performance of the technology. Maintenance and repair of corrosion protection systems are particularly laborious and costly. Explores the literature between 1950 and 2020 and contains over 2000 references Offers the most complete monograph on the issue Covers all aspects of corrosion protection in detail, including coatings, cathodic protection, corrosion allowance, and constructive design, as well as maintenance and repair Delivers the most complete review on corrosion of metals in marine/offshore environments Focuses on all aspects of offshore wind power structures, including foundations, towers, internal sections, connection flanges, and transformation platforms

Download or read book LaQue s Handbook of Marine Corrosion written by David A. Shifler and published by John Wiley & Sons. This book was released on 2022-07-13 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of LaQue's classic text on marine corrosion, providing fully updated control engineering practices and applications Extensively updated throughout, the second edition of La Que's Handbook of Marine Corrosion remains the standard single-source reference on the unique nature of seawater as a corrosive environment. Designed to help readers reduce operational and life cycle costs for materials in marine environments, this authoritative resource provides clear guidance on design, materials selection, and implementation of corrosion control engineering practices for materials in atmospheric, immersion, or wetted marine environments. Completely rewritten for the 21st century, this new edition reflects current environmental regulations, best practices, materials, and processes, with special emphasis placed on the engineering, behavior, and practical applications of materials. Divided into three parts, the book first explains the fundamentals of corrosion in marine environments, including atmospheric corrosion, erosion, microbiological corrosion, fatigue, environmental cracking, and cathodic delamination. The second part discusses corrosion control methods and materials selection that can mitigate or eliminate corrosion in different marine environments. The third section provides the reader with specific applications of corrosion engineering to structures, systems, or components that exist in marine environments. This much-needed new edition: Presents a comprehensive and up-to-date account of the science and engineering aspects of marine corrosion Focuses on engineering aspects, descriptive behavior, and practical applications of materials usage in marine environments Addresses the various materials used in marine environments, including metals, polymers, alloys, coatings, and composites Incorporates current regulations, standards, and recommended practices of numerous organizations such as ASTM International, the US Navy, the American Bureau of Shipping, the International Organization for Standardization, and the International Maritime Organization Written in a clear and understandable style, La Que's Handbook of Marine Corrosion, Second Edition is an indispensable resource for engineers and materials scientists in disciplines spanning the naval, maritime, commercial, shipping industries, particularly corrosion engineers, ship designers, naval architects, marine engineers, oceanographers, and other professionals involved with products that operate in marine environments.

Download or read book The Influence of Mean Tensile Stress on Corrosion Fatigue Crack Growth in Structural Steel Immersed in Seawater written by Peter Scott and published by . This book was released on 1977 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book SSC written by United States. Ship Structure Committee and published by . This book was released on 1984 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Fatigue Technology written by H. Lee Craig and published by ASTM International. This book was released on 1978 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An investigation of the corrosion fatigue crack growth behaviour of structural steels in sea water written by H. G. Morgan and published by . This book was released on 1983 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Influence of Mean Tensile Stress on Corrosion Fatigue Crack Growth in Structural Steel Immersed in Seawater written by Paul Scott and published by . This book was released on 1977 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue in Offshore Structural Steels written by and published by Thomas Telford Publishing. This book was released on 1981 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the U S Nuclear Regulatory Commission Twelfth Water Reactor Safety Research Information Meeting Held at National Bureau of Standards Gaithersburg Maryland October 22 26 1983 i e 1984 written by and published by . This book was released on 1985 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Influence of Salt Water on Fatigue Crack Growth in High Strength Structural Steels written by TW. Crooker and published by . This book was released on 1970 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue-crack growth is a potential failure mechanism that can be strongly influenced by a salt-water environment. This paper discusses fatigue-crack-propagation studies performed on three high-strength structural steels: 9Ni-4Co-0.25C, 12Ni 180-grade maraging, and 18Ni 200-grade maraging. Each steel underwent a program of fatigue cycling in two environments, a "dry" environment consisting of ambient room air and a "wet" environment consisting of 3.5 percent NaCl salt water. Relationships for fatigue-crack-growth rates as a function of the fracture mechanics stress-intensity factor (K) were obtained experimentally for each steel in both environments. The engineering significance of these relationships is presented in terms of stress levels and flaw sizes relevant to the steels under investigation. The results of this work indicate that, in an air environment, the fatigue-crack-growth rate correlates with the stress-intensity-factor range according to the power-law relationship, da/dN = C (?K)m. Fatigue-crack growth in each of the steels was accelerated by the salt-water environment. However, the environmental response varied significantly, depending upon the material and the ?K level. The lower-toughness steel was less affected by environment, and environmental effects in all the steels diminished with increasing ?K levels. No correlation was observed between fatigue-crack-growth behavior in the salt-water environment and the stress-corrosion-cracking parameter (K Iscc) obtained on the same materials.

Download or read book Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering written by and published by . This book was released on 1994 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effects of Sea Water Corrosion on Fatigue Crack Propagation in BS4360 50D Steel written by R. Johnson and published by . This book was released on 1978 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Steel in Marine Structures written by C. Noordhoek and published by Elsevier Publishing Company. This book was released on 1987 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the results of the third phase (1981 - 1987) of a research programme on the in-service behaviour of welded marine structures under fatigue and corrosion fatigue loading. The programme was undertaken in six EEC countries (Denmark, France, Germany, Italy, The Netherlands, United Kingdom) in close association with similar work being undertaken in Norway and Canada. In all, more than 40 research laboratories have been involved in an overall collaboration aimed at generating information relevant to the performance of offshore steel structures and fostering a precise degree of common technical understanding that will encourage the increased use of structural steel fabrications for the exploitation of offshore hydrocarbon reserves throughout the world. The programme has already produced tangible benefits for both the steel and oil industries through the contribution it has made to a better understanding of the behaviour of steel structures in marine environments as well as by providing the data necessary for the revision of codes of practice relating to the fabrication of these structures.