Download or read book The Effect of Platinum Surface Structure in the Oxidation of Glycerol written by Yang Li and published by . This book was released on 2014 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface structures of catalysts have in some instances a large impact on their catalytic properties. On the other hand, historically, mild reactions are not considered to be surface structure sensitive. In this thesis we report on our observation that both the size and the shape of Pt nanoparticles strongly affect the selectivity of glycerol oxidation, a reaction that can proceed at low temperature and under atmospheric pressures. In a series of experiment using Pt/SiO 2 catalysts with average particle sizes varying from 3.9 to 5.7 nm, it was determined that selectivity toward primary carbon oxidation increases as the proportion of larger particles increases. Together with CO IR titration result, these results appears to indicate that larger Pt particles with flat surfaces and extensive fractions of atop and bridge sites may promote primary carbon oxidation, whereas edge, corner, and other low-coordination Pt sites may promote secondary carbon oxidation. Further catalyst characterization and kinetic experiments will be needed to confirm this tentative conclusion. Tetrahedral- and cuboctahedral-shaped Pt catalysts were also tested for the glycerol oxidation reaction, and cuboctahedral-shaped Pt nanoparticles were found to display higher activity and higher selectivity toward primary carbon oxidation.
Download or read book Advanced Electrocatalysts for Low Temperature Fuel Cells written by Francisco Javier Rodríguez-Varela and published by Springer. This book was released on 2018-10-09 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader to the state of the art in nanostructured anode and cathode electrocatalysts for low-temperature acid and alkaline fuel cells. It explores the electrocatalysis of anode (oxidation of organic molecules) and cathode (oxygen reduction) reactions. It also offers insights into metal-carbon interactions, correlating them with the catalytic activity of the electrochemical reactions. The book explores the electrocatalytic behaviour of materials based on noble metals and their alloys, as well as metal-metal oxides and metal-free nanostructures. It also discusses the surface and structural modification of carbon supports to enhance the catalytic activity of electrocatalysts for fuel-cell reactions.
Download or read book Increased Biodiesel Efficiency written by Magno Trindade and published by Springer. This book was released on 2018-01-28 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book advances the use of biodiesel—more environmentally friendly than traditional fossil fuels—by showing how it can be synthesized at a lower cost, with greater efficiency and as a more pure and stable product. It presents methods based on fluorescence spectroscopy, which are less time-consuming than the traditional Rancimat analysis for monitoring stability, and are therefore less prone to allowing oxidative decay in the biofuel. Biodiesel exploits a variety of raw materials, from freshly harvested cottonseed to recycled cooking oil. These are cheap to produce and generate fuel lower in polluting sulphur and aromatic compounds than its petroleum-based equivalent. Beginning by addressing different protocols for synthesis based on fatty acids, methyl and ethyl esters, it then describes chemical analyses essential to establishing the purity of the biodiesel. It highlights in detail the use of multifunctional and synthetic antioxidants, and investigates the impact of synthetic chalcones and their derivatives on the oxidative stability of biodiesel. The author goes on to explain how to ameliorate various influences – UV irradiation and metal contaminants for example – which increase the hazards of oxidation, such as degradation and instability. New pre-treatment procedures performed using ultrasonic energies, thermostatic bath and vortex stirring are not only more environmentally friendly, but cut down on the time-consuming process of determining metal content, and allow for the use of more environmentally friendly aqueous reagents. The book investigates and demonstrates these techniques on the basis of real-world results. Further, it suggests the practical uses of byproducts of biodiesel production, for example, using glycerol as a source of energy and high valuable chemicals. These useful techniques aid any researcher exploring the production process of biodiesel and its stabilization and characteristics.
Download or read book From Glycerol to Value Added Products written by Patrick Cognet and published by Frontiers Media SA. This book was released on 2020-03-10 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Structure and Reactivity of Platinum in the Oxidation of Ammonia written by Yingfeng Zeng and published by . This book was released on 2008 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Interfacial Chemistry written by and published by Elsevier. This book was released on 2018-03-29 with total page 5276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry, Seven Volume Set summarizes current, fundamental knowledge of interfacial chemistry, bringing readers the latest developments in the field. As the chemical and physical properties and processes at solid and liquid interfaces are the scientific basis of so many technologies which enhance our lives and create new opportunities, its important to highlight how these technologies enable the design and optimization of functional materials for heterogeneous and electro-catalysts in food production, pollution control, energy conversion and storage, medical applications requiring biocompatibility, drug delivery, and more. This book provides an interdisciplinary view that lies at the intersection of these fields. Presents fundamental knowledge of interfacial chemistry, surface science and electrochemistry and provides cutting-edge research from academics and practitioners across various fields and global regions
Download or read book Direct Alcohol Fuel Cells written by Horacio R. Corti and published by Springer Science & Business Media. This book was released on 2013-12-02 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Alcohol Fuel Cells: Materials, Performance, Durability and Applications begins with an introductory overview of direct alcohol fuel cells (DAFC); it focuses on the main goals and challenges in the areas of materials development, performance, and commercialization. The preparation and the properties of the anodic catalysts used for the oxidation of methanol, higher alcohols, and alcohol tolerant cathodes are then described. The membranes used as proton conductors in DAFC are examined, as well as alkaline membranes, focusing on the electrical conductivity and alcohol permeability. The use of different kinds of carbon materials as catalyst supports, gas diffusion layers, and current collectors in DAFC is also discussed. State of the art of the modeling is used to estimate performance and durability. The closing chapter reviews the use of DAFC in portable equipment and mobile devices and features a detailed discussion on the mechanisms of component degradation which limits their durability. This book is written to facilitate the understanding of DAFC technology, applications, and future challenges. It is an excellent introduction for electrochemical and material engineers interested in small fuel cells as portable energy sources, scientists focused on materials science for energy production and storage, as well as policy-makers in the area of renewable energies.
Download or read book Direct Liquid Fuel Cells written by Ramiz Gültekin Akay and published by Academic Press. This book was released on 2020-09-10 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Liquid Fuel Cells is a comprehensive overview of the fundamentals and specificities of the use of methanol, ethanol, glycerol, formic acid and formate, dimethyl ether, borohydride, hydrazine and other promising liquid fuels in fuel cells. Each chapter covers a different liquid fuel-based fuel cell such as: Anode catalysts of direct methanol fuel cells (DMFCs), future system designs and future trends for direct ethanol fuel cells (DEFCs), development of catalysts for direct glycerol fuel cells (DGFCs), the mechanisms of the reactions taking place at the anode and cathode electrodes, and the reported anode catalysts for direct formic acid fuel cell (DFAFC) and direct formate fuel cell (DFFC), characteristics of direct dimethyl ether fuel cell (DDMEFC), including its electrochemical and operating systems and design, the developments in direct borohydride fuel cells, the development of catalysts for direct hydrazine fuel cells (DHFCs), and also the uncommonly used liquids that have a potential for fuel cell applications including 2-propanol, ethylene glycol, ascorbic acid and ascorbate studied in the literature as well as utilization of some blended fuels. In each part, the most recent literature is reviewed and the state of the art is presented. It also includes examples of practical problems with solutions and a summarized comparison of performance, advantages, and limitations of each type of fuel cell discussed. Direct Liquid Fuel Cells is not a typical textbook but rather designed as a reference book of which any level of students (undergraduate or graduate), instructors, field specialists, industry and general audience, who benefit from current and complete understanding of the many aspects involved in the development and operation of these types of fuel cells, could make use of any chapter when necessary. Presents information on different types of direct liquid fuel cells. Explores information under each section, for specific fuel-based fuel cells in more detail in terms of the materials used. Covers three main sections: direct alcohol, organic fuel-based and inorganic fuel-based fuel cells
Download or read book A Guidebook to Biochemistry written by Michael Yudkin and published by Cambridge University Press. This book was released on 1980-09-25 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a completely revised and expanded edition of the Guidebook to Biochemistry. Every chapter has been reviewed and brought up to date. A new chapter, on the cell and membrane transport, has been included, and the single chapter on regulation in the previous edition has been greatly enlarged and divided into two chapters. Other topics that have received particular attention in this edition include lipids, cell membranes and the biochemical action of hormones. The chapter on genetics has been revised to take account of recent studies of the genetic organization of higher organisms, and a section on genetic engineering has been included. In making these changes the authors have taken care to adhere to the concept of the 'Guidebook' introduced by Kenneth Harrison and maintained by them in the 1971 edition: to 'introduce the reader to the important features of the subject by exemplifying and discussing crucial biochemical concepts'. For this reason they have been careful to restrict the increase in the total length of the book compared with the 1971 edition.
Download or read book Catalysis written by James J. Spivey and published by Royal Society of Chemistry. This book was released on 1996 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an increasing challenge for chemical industry and research institutions to find cost-efficient and environmentally sound methods of converting natural resources into fuels chemicals and energy. Catalysts are essential to these processes and the Catalysis Specialist Periodical Report series serves to highlight major developments in this area. This series provides systematic and detailed reviews of topics of interest to scientists and engineers in the catalysis field. The coverage includes all major areas of heterogeneous and homogeneous catalysis and also specific applications of catalysis such as NOx control kinetics and experimental techniques such as microcalorimetry. Each chapter is compiled by recognised experts within their specialist fields and provides a summary of the current literature. This series will be of interest to all those in academia and industry who need an up-to-date critical analysis and summary of catalysis research and applications. Catalysis will be of interest to anyone working in academia and industry that needs an up-to-date critical analysis and summary of catalysis research and applications. Specialist Periodical Reports provide systematic and detailed review coverage in major areas of chemical research. Compiled by teams of leading experts in their specialist fields, this series is designed to help the chemistry community keep current with the latest developments in their field. Each volume in the series is published either annually or biennially and is a superb reference point for researchers. www.rsc.org/spr
Download or read book Fuel Cell Catalysis written by Andrzej Wieckowski and published by John Wiley & Sons. This book was released on 2009-04-01 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wiley Series on Electrocatalysis and Electrochemistry Fuel Cell Catalysis A Surface Science Approach A Core reference on fuel cell catalysis Fuel cells represent an important alternative energy source and a very active area of research. Fuel Cell Catalysis brings together world leaders in this field, providing a unique combination of state-of-the-art theory and computational and experimental methods. With an emphasis on understanding fuel cell catalysis at the molecular level, this text covers fundamental principles, future challenges, and important current research themes. Fuel Cell Catalysis: Provides a molecular-level description of catalysis for low-temperature polymer-electrolyte membrane fuel cells, including both hydrogen-oxygen cells and direct alcohol cells Examines catalysis issues of both anode and cathode such as oxygen reduction, alcohol oxidation, and CO tolerance Features a timely and forward-looking approach through emphasis on novel aspects such as computation and bio-inspiration Reviews the use and potential of surface-sensitive techniques like vibrational spectroscopy (IR, Raman, nonlinear spectroscopy, laser), scanning tunneling microscopy, X-ray scattering, NMR, electrochemical techniques, and more Reviews the use and potential of such modern computational techniques as DFT, ab initio MD, kinetic Monte Carlo simulations, and more Surveys important trends in reactivity and structure sensitivity, nanoparticles, "dynamic" catalysis, electrocatalysis vs. gas-phase catalysis, new experimental techniques, and nontraditional catalysts This cutting-edge collection offers a core reference for electrochemists, electrocatalysis researchers, surface and physical chemists, chemical and automotive engineers, and researchers in academia, research institutes, and industry.
Download or read book Synthesis of Solid Catalysts written by Krijn P. de Jong and published by John Wiley & Sons. This book was released on 2009-06-22 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book combines recent progress with a discussion of the general aspects of catalyst preparation. The first part deals with the basic principles of solid catalyst preparation, explaining the main aspects of sol-gel chemistry and interfacial chemistry, followed by such techniques as co-precipitation and immobilization. New tools for catalyst preparation research, including microspectroscopy and high-throughput experimentation, are also taken into account. The second part heightens the practical relevance by providing six case studies on such topics as the preparation of zeolites, hydrotreating catalysts, methanol catalysts and gold catalysts
Download or read book Sustainable Chemistry Research written by Ponnadurai Ramasami and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-10-23 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book of proceedings is a collection of seventeen selected and peer-reviewed contributions from the Virtual Conference on Chemistry and its Applications (VCCA-2022). VCCA-2022 was held online from 8th to 12th August 2022. The theme of the conference was "Resilience and Sustainable Research through Basic Sciences". 500 participants from 55 countries participated in VCCA-2022. This volume 2 reflects the chapters covering computational and industrial aspects.
Download or read book Production of Clean Hydrogen by Electrochemical Reforming of Oxygenated Organic Compounds written by Claude Lamy and published by Academic Press. This book was released on 2019-11-27 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production of Clean Hydrogen by Electrochemical Reforming of Oxygenated Organic Compounds provides a comprehensive overview of the thermodynamics and experimental results that allow the decomposition process of organic compounds leading to hydrogen to be carried out at working cell voltages much lower than those encountered in water electrolysis. The authors review different methods of synthesis and characterization of the catalysts needed to activate the electro-oxidation reaction and describe different electrolysis experiments that produce hydrogen in a Proton Exchange Membrane Electrolysis Cell (PEMEC). Other sections investigate the effect of the nature of the reactive molecules, the nature and structure of the catalysts, and more. By exploring the link between organic oxidation/conversion to hydrogen production, this book fills a gap in the existing literature and provides researchers in the field with an authoritative and comprehensive reference they can use when developing new sustainable processes and systems for hydrogen production. Explores, in detail, the decomposition process of organic compounds leading to hydrogen Presents foundational information, practical insights and pathways for future work in the development of proton exchange membrane electrolysis cell systems Includes results, experimental data and interpretations using different organic compounds, such as methanol, formic acid, ethanol, glycerol and biomass
Download or read book Biomass Processing over Gold Catalysts written by Olga A. Simakova and published by Springer Science & Business Media. This book was released on 2013-07-13 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the valorization of biomass-derived compounds over gold catalysts. Since biomass is a rich renewable feedstock for diverse platform molecules, including those currently derived from petroleum, the interest in various transformation routes has become intense. Catalytic conversion of biomass is one of the main approaches to improving the economic viability of biorefineries. In addition, Gold catalysts were found to have outstanding activity and selectivity in many key reactions. This book collects information about transformations of the most promising and important compounds derived from cellulose, hemicelluloses, and woody biomass extractives. Since gold catalysts possess high stability under oxidative conditions, selective oxidation reactions were discussed more thoroughly than other critical reactions such as partial hydrogenation, acetalization, and isomerization. The influence of reaction conditions, the role of the catalyst, and the advantages and disadvantages of using gold are presented for all of the reactions mentioned above. This book provides an overview of the recent research results focusing on application of gold catalysts for synthesis of valuable chemicals using renewable feedstocks.
Download or read book Electrochemistry written by Craig Banks and published by Royal Society of Chemistry. This book was released on 2017-03-14 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing the reader with an up to date digest of the most important research currently carried out in the field, Electrochemistry Volume 14 is compiled and written by leading experts from across the globe. Coverage includes chapters on the use of metal organic frameworks as a precursor for electrocatalytic centre supports to enhance the oxygen reduction process in low temperature fuel cell systems, electrocatalysis for ethanol electrooxidation in alkaline media, and new polymer electrolyte and electrocatalysts for direct alcohol fuel cells. This volume is a key reference for researchers providing a timely overview of this exciting and developing area.
Download or read book Nanoporous Catalysts for Biomass Conversion written by Feng-Shou Xiao and published by John Wiley & Sons. This book was released on 2017-11-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to the design, synthesis, characterization, and catalytic properties of nanoporous catalysts for the biomass conversion With the specter of peak oil demand looming on the horizon, and mounting concerns over the environmental impact of greenhouse gas emissions, biomass has taken on a prominent role as a sustainable alternative fuel source. One critical aspect of the biomass challenge is the development of novel catalytic materials for effective and controllable biomass conversion. Edited by two scientists recognized internationally for their pioneering work in the field, this book focuses on nanoporous catalysts, the most promising class of catalytic materials for the conversion of biomass into fuel and other products. Although various catalysts have been used in the conversion of biomass-derived feedstocks, nanoporous catalysts exhibit high catalytic activities and/or unique product selectivities due to their large surface area, open nanopores, and highly dispersed active sites. This book covers an array of nanoporous catalysts currently in use for biomass conversion, including resins, metal oxides, carbons, mesoporous silicates, polydivinylbenzene, and zeolites. The authors summarize the design, synthesis, characterization and catalytic properties of these nanoporous catalysts for biomass conversions, discussing the features of these catalysts and considering future opportunities for developing more efficient catalysts. Topics covered include: Resins for biomass conversion Supported metal oxides/sulfides for biomass oxidation and hydrogenation Nanoporous metal oxides Ordered mesoporous silica-based catalysts Sulfonated carbon catalysts Porous polydivinylbenzene Aluminosilicate zeolites for bio-oil upgrading Rice straw Hydrogenation for sugar conversion Lignin depolymerization Timely, authoritative, and comprehensive, Nanoporous Catalysts for Biomass Conversion is a valuable working resource for academic researchers, industrial scientists and graduate students working in the fields of biomass conversion, catalysis, materials science, green and sustainable chemistry, and chemical/process engineering.
