Download or read book The Effect of Minor Alloying Element Additions on Mechanical Properties of Titanium Alloys written by and published by . This book was released on 1977 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Technical Report describes a research program conducted jointly by the Science Center, Rockwell International, and TIMET, to study the effects of minor element additions on the mechanical properties of titanium alloys. The effect of additions of Si, Bi, Fe, S and 0 on mechanical properties of a base alloy of composition Ti-6Al-2Sn-2Zr-1Mo have been studied. In this Technical Report final results on tensile, creep, creep stability, alloy partitioning, fatigue, fracture, hot salt stress corrosion, and microstructural characterization of these alloys is presented.
Download or read book The Effect of Addition Elements on the Rate of Beta Grain Growth in Alpha beta and Beta Titanium Alloys written by F. A. Crossley and published by . This book was released on 1962 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: TILITY THROUGH A SCAVENGING ACTION. (Author).
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book The Effects of Alloying Elements in Titanium written by D. J. Maykuth and published by . This book was released on 1961 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alloying written by Joseph R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloying: Understanding the Basics is a comprehensive guide to the influence of alloy additions on mechanical properties, physical properties, corrosion and chemical behavior, and processing and manufacturing characteristics. The coverage considers "alloying" to include any addition of an element or compound that interacts with a base metal to influence properties. Thus, the book addresses the beneficial effects of major alloy additions, inoculants, dopants, grain refiners, and other elements that have been deliberately added to improve performance, as well the detrimental effects of minor elements or residual (tramp) elements included in charge materials or that result from improper melting or refining techniques. The content is presented in a concise, user-friendly format. Numerous figures and tables are provided. The coverage has been weighted to provided the most detailed information on the most industrially important materials.
Download or read book The Effect of Microstructure on the Mechanical Properties of Titanium Alloys Effect of Microstructure on the Mechanical Properties of Titanium Manganese Alloys Containing Alpha Solute Additions written by H. R. Ogden and published by . This book was released on 1954 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1982 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book The Effects of Small Varying Additions of the Common Contaminants of Titanium on the Mechanical Properties of the Ti 5Al 2 5Sn Alloy The Development of Strong Tough Titanium Alloys for Ordnance Use written by REM-CRU TITANIUM INC MIDLAND PA. and published by . This book was released on 1954 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Interactions of Titanium and Molybdenum Additions with Interstitial Impurities in Vanadium written by George H. Keith and published by . This book was released on 1969 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gamma Titanium Aluminides written by Young-Won Kim and published by Minerals, Metals, & Materials Society. This book was released on 1995 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume publication is a comprehensive update of the fundamental and practical issues confronting the research, development and application of gamma titanium aluminides.
Download or read book Influence of Rare Earth Additions on Properties of Titanium Alloys Effects of Yttrium and Erbium Additions on Ti 8Al and Ti 10Al Alloy written by S. M. L. Sastry and published by . This book was released on 1980 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: The influence of additions of 0.05-1.0 wt% Y and 0.2-2.0 wt% Er on the microstructure, slip distribution, fracture modes, and room- and elevated-temperature mechanical properties of Ti-8Al and Ti-10Al alloys was studied. Additions of up to 0.1 wt% Y and 0.2 wt% Er result in 50-200 nm incoherent dispersoids which effect grain refinement, reduce the planarity of slip, and significantly increase the ductility of Ti-8Al alloys. The additions further improve the room-temperature fracture toughness and room- and elevated-temperature low-cycle fatigue life of Ti-8Al and do not significantly alter the creep of Ti-8Al and Ti-10Al alloys. Higher amounts of Y and Er additions produce large, 1-5 micron dispersoids and produce no significant grain refinement or improvements in strength and ductility of the alloys.
Download or read book Effect of Boron Additions on Microstructure Mechanical Properties of Titanium Alloys Produced by the Armstrong Process written by Jonathan P. Blank and published by . This book was released on 2008 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: The beneficial influence of boron additions on processing, microstructure, physical and mechanical properties of various titanium alloys has been recognized since 1950's. However, boron additions to titanium alloys to obtain specific microstructures and mechanical properties for several niche applications, including automotive and aerospace, have been actively studied during the past 25 years. The addition of boron concentrations greater than 0.05 wt.% to titanium alloys creates a dispersion of TiB. The presence of TiB enhances the tensile and fatigue strengths as well as the wear resistance as compared to the original titanium alloy. Although these improvements in mechanical properties are attractive, there are still two major obstacles in using these alloys: (1) relationship of microstructure and mechanical properties in Ti-B alloys needs further investigation to optimize the alloys for specific commercial applications; and (2) cost to benefit ratio of producing these alloys is high for a given application(s). The Armstrong process is a novel process that can produce commercially pure (CP) titanium and titanium alloy powder directly from TiCl4 (and other metal halides or as required, to obtain the desired alloy composition). The Armstrong process uses sodium as a reducing agent, with similar reactions as the Hunter process using sodium as a reducing agent and Kroll process using magnesium as a reducing agent. The Armstrong process forms CP-Ti and titanium alloyed powder, which can be directly consolidated or melted into the final product. In comparing the downstream processing steps required by the Kroll and Hunter processes with direct consolidation of Armstrong powder, several processing features or steps are eliminated: (1) restriction of batch processing of material, (2) blending of titanium sponge and master alloy material to create titanium alloys, (3) crushing of the sponge product, (4) melting, and (5) several handling steps. The main objective of this research was to characterize structure and properties of CP-Ti and Ti-B alloys produced by the Armstrong process. Particular emphasis has been placed on improved understanding of the strengthening mechanisms associated with the addition of boron to titanium alloys.
Download or read book Proceedings of MEACM 2020 written by Lifang Zheng and published by Springer Nature. This book was released on 2021-05-31 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 4th International Conference on Mechanical Engineering and Applied Composite Materials (MEACM), held in Beijing, China on October 24-25, 2020. The conference brought together researchers from several countries and covered all major areas of mechanical engineering and applied composite materials, new applications and current trends. The topics covered include: structure and design, mechanical manufacturing and automation, robotics and mechatronics, mechanical behavior of nanomaterials, nanocomposites, and composite mechanics. Given its scope, the book offers a source of information and inspiration for researchers seeking to improve their work and gather new ideas for future developments.
Download or read book Corrosion of Titanium written by J. D. Jackson and published by . This book was released on 1966 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications Cumulative Index written by United States. Superintendent of Documents and published by . This book was released on 1976 with total page 1408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
