Download or read book Cumulated Index Medicus written by and published by . This book was released on 1989 with total page 1506 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dental Composite Materials for Direct Restorations written by Vesna Miletic and published by Springer. This book was released on 2017-11-25 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers both basic scientific and clinically relevant aspects of dental composite materials with a view to meeting the needs of researchers and practitioners. Following an introduction on their development, the composition of contemporary composites is analyzed. A chapter on polymerization explains the setting reactions and light sources available for light-cured composites. The quality of monomer-to-polymer conversion is a key factor for material properties. Polymerization shrinkage along with the associated stress remains among the most challenging issues regarding composite restorations. A new classification of dental composites is proposed to offer more clinically relevant ways of differentiating between commercially available materials. A review of specific types of composites provides an insight into their key issues. The potential biological issues of dental composites are reviewed in chapters on elution of leachable substances and cariogenicity of resin monomers. Clinical sections focus on material placement, finishing procedures, and the esthetics and clinical longevity of composite restorations. Bonding to tooth tissues is addressed in a separate chapter, as is the efficiency of various composite repair methods. The final chapter discusses future perspectives on dental composite materials.

Download or read book Dental Materials and Their Selection written by William Joseph O'Brien and published by Quintessence Publishing (IL). This book was released on 1997 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. A Comparison of Metals, Ceramics, and Polymers. -- 2. Physical Properties. -- 3. Color and Appearance. -- 4. Surface Phenomena and Adhesion to Tooth Structure. -- 5. Gypsum Products. -- 6. Polymers and Polymerizations: Denture Base Polymers. -- 7. Polymeric Restorative Materials: Composites and Sealants. -- 8. Abrasion, Polishing, and Bleaching. -- 9. Impression Materials. -- 10. Waxes. -- 11. Dental Cements. -- 12. Structure and Properties of Metals and Alloys. -- 13. Dental Amalgams. -- 14. Direct Gold Filling Materials. -- 15. Precious Metal Casting Alloys. -- 16. Alloys for Porcelain-Fused-to-Metal Restorations. -- 17. Casting. -- 18. High-Temperature Investments. -- 19. Base Metal Casting Alloys. -- 20. Orthodontic Wires. -- 21. Dental Porcelain. -- 22. Soldering, Welding, and Electroplating. -- 23. Dental Implant Materials.

Download or read book Restoration of Root Canal Treated Teeth written by Jorge Perdigão and published by Springer. This book was released on 2015-10-02 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive and up-to-date overview of the restoration of teeth retained through root canal treatment, from the perspective of adhesive dentistry. The challenge of adhesion to root dentin is first explained and guidance provided on assessment of the restorability of endodontically treated teeth. The types of prefabricated passive post are then described in detail. The advantages and disadvantages of each type are outlined, with identification of the factors that influence post selection. Further topics include the ferrule effect, evidence‐based clinical applications of fiber posts and new methods to lute fiber posts to the root canal without dentin adhesives. In addition, frequent myths are identified and dispelled. All aspects are illustrated with clinical and laboratory images, diagrams and high-resolution electron microscopy photographs.

Download or read book Tooth colored Restoratives written by Harry F. Albers and published by PMPH-USA. This book was released on 2002 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the nature, benefits, and limitations of resins and ionomers. Products are classified by material type and clarified as to their use. Text is supported by more than 700 dentists' involvement in study group evaluations of techniques and results. CD-ROM includes complete text and illustrations in fully searchable PDF files. Previous edition: c1998.

Download or read book Handbook of Biomaterial Properties written by William Murphy and published by Springer. This book was released on 2016-06-11 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tabular and text data relating to normal and diseased tissue materials and materials used in medical devices. Comprehensive and practical for students, researchers, engineers, and practicing physicians who use implants, this book considers the materials aspects of both implantable materials and natural tissues and fluids. Examples of materials and topics covered include titanium, elastomers, degradable biomaterials, composites, scaffold materials for tissue engineering, dental implants, sterilization effects on material properties, metallic alloys, and much more. Each chapter author considers the intrinsic and interactive properties of biomaterials, as well as their appropriate applications and historical contexts. Now in an updated second edition, this book also contains two new chapters on the cornea and on vocal folds, as well as updated insights, data, and citations for several chapters.

Download or read book Basic Dental Materials written by John J Manappallil and published by JP Medical Ltd. This book was released on 2015-11-30 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic Dental Materials is the new edition of this extensive guide to materials used in dentistry. The book has been entirely reorganised, with substantial revisions in each chapter incorporating the latest developments and research findings, and new colour illustrations have been added. This book is divided into seven sections, the first covering the structure and properties of dental materials, including electrochemical and biological properties. Further sections cover specific groups of materials, including direct restorative materials, endodontic materials (new to this edition), impression materials, materials and processes in the dental laboratory, alloys, and indirect restorative and prosthetic materials. The chapter on dental ceramics in the final section is entirely revised to reflect the significant advances in this technology since the previous edition. Basic Dental Materials provides a practical approach to the selection and use of modern dental materials, with guidance on preparation for indirect restorations such as crowns, bridges and inlays. Enhanced by 645 images and illustrations, this comprehensive book will bring the knowledge of dental students and practising students firmly up to date. Key Points Latest edition of this extensive, illustrated guide to basic dental materials Previous edition published 2010 (9788184489217) Entirely reorganised, with a new section on endodontic materials, and chapter revisions reflecting recent advances in the field 645 images and illustrations, the majority in full colour

Download or read book Degradation of Implant Materials written by Noam Eliaz and published by Springer Science & Business Media. This book was released on 2012-08-21 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current understanding of the mechanical, chemical and biological processes that are responsible for the degradation of a variety of implant materials. All 18 chapters will be written by internationally renowned experts to address both fundamental and practical aspects of research into the field. Different failure mechanisms such as corrosion, fatigue, and wear will be reviewed, together with experimental techniques for monitoring them, either in vitro or in vivo. Procedures for implant retrieval and analysis will be presented. A variety of biomaterials (stainless steels, titanium and its alloys, nitinol, magnesium alloys, polyethylene, biodegradable polymers, silicone gel, hydrogels, calcium phosphates) and medical devices (orthopedic and dental implants, stents, heart valves, breast implants) will be analyzed in detail. The book will serve as a broad reference source for graduate students and researchers studying biomedicine, corrosion, surface science, and electrochemistry.

Download or read book Processes and Phenomena on the Boundary Between Biogenic and Abiogenic Nature written by Olga V. Frank-Kamenetskaya and published by Springer Nature. This book was released on 2019-08-29 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book represents a collection of papers presented at VI International Symposium "Biogenic - abiogenic interactions in natural and anthropogenic systems" that was held on 24-27 September 2018 in Saint Petersburg (Russia). Papers in this book cover a wide range of topics connecting with interactions between biogenic and abiogenic components in lithosphere, biosphere and technosphere. The main regarding topics are following: methods for studying the interactions between biogenic and abiogenic components; geochemistry of biogenic-abiogenic systems; biomineralization and nature-like materials and technologies; medical geology; biomineralogy and organic mineralogy; biomineral interactions in soil; biodeterioration of natural and artificial materials; biomineral interactions in extreme environment.

Download or read book Endodontic Treatment Retreatment and Surgery written by Bobby Patel and published by Springer. This book was released on 2016-08-01 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides clear, concise guidance on a range of essential treatment strategies for the provision of reliable endodontic care. Practical clinical procedures are described step by step and key concepts emphasized with the aid of a wealth of high-quality illustrations and photographs. Examples of best practice are documented by means of clinical case examples, and the provision of concise tips and recommendations ensures that the reader will quickly be able to find solutions to any one of the myriad of endodontic challenges with which he or she may be confronted. In addition, the most relevant key literature is reviewed in order to support and reinforce the discussed clinical concepts. The described endodontic treatment strategies are all grounded in a sound scientific evidence base. The book should enable practitioners to manage any endodontic case from first principles and will be of value for both dental practitioners and endodontic trainees/specialists.

Download or read book Applied Dental Materials written by John F. McCabe and published by Wiley-Blackwell. This book was released on 1990 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micro and Nanomanufacturing written by Mark J. Jackson and published by Springer Science & Business Media. This book was released on 2007-06-19 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This, the corrected second printing of Jackson’s authoritative volume on the subject, provides a comprehensive treatment of established micro and nanofabrication techniques. It addresses the needs of practicing manufacturing engineers by applying established and research laboratory manufacturing techniques to a wide variety of materials. Nanofabrication and nanotechnology present a great challenge to engineers and researchers as they manipulate atoms and molecules to produce single artifacts and submicron components and systems. The book provides up-to-date information on a number of subjects of interest to engineers who are seeking more knowledge of how nano and micro devices are designed and fabricated. They will learn about manufacturing and fabrication techniques at the micro and nanoscales; using bulk and surface micromachining techniques, and LiGA, and deep x-ray lithography to manufacture semiconductors. Also covered are subjects including producing master molds with micromachining, the deposition of thin films, pulsed water drop machining, and nanomachining.

Download or read book Solid Lubrication Fundamentals and Applications written by Kazuhisa Miyoshi and published by CRC Press. This book was released on 2019-06-05 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Lubrication Fundamentals and Applications description of the adhesion, friction, abrasion, and wear behavior of solid film lubricants and related tribological materials, including diamond and diamond-like solid films. The book details the properties of solid surfaces, clean surfaces, and contaminated surfaces as well as discussing the structu

Download or read book Biomaterials written by S.V. Bhat and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: As biomaterials are used in medical devices, meeting needs in such diverse surgical disciplines as ophthalmology, cardiology, neuromuscular surgery, orthopaedics, dentistry, etc., they must have intimate contact with patient's tissue or body fluids, providing a real physical interface which seriously restricts developments. This book is written for those who would like to advance their knowledge of biomaterials. The subject matter of the book is divided into twelve chapters dealing with the structure and relationship of biological and man-made biomaterials. The application of these materials for various medical devices, and recent developments in tissue engineering, are also discussed.

Download or read book Micro computed Tomography micro CT in Medicine and Engineering written by Kaan Orhan and published by Springer. This book was released on 2019-07-25 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on applications of micro CT, CBCT and CT in medicine and engineering, comprehensively explaining the basic principles of these techniques in detail, and describing their increasing use in the imaging field. It particularly highlights the scanning procedure, which represents the most crucial step in micro CT, and discusses in detail the reconstruction process and the artifacts related to the scanning processes, as well as the imaging software used in analysis. Written by international experts, the book illustrates the application of micro CT in different areas, such as dentistry, medicine, tissue engineering, aerospace engineering, geology, material engineering, civil engineering and additive manufacturing. Covering different areas of application, the book is of interest not only to specialists in the respective fields, but also to broader audience of professionals working in the fields of imaging and analysis, as well as to students of the different disciplines.

Download or read book Dentin Pulp Complex written by Tatsuya Ishikawa and published by Quintessence Publishing (IL). This book was released on 2002 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sturdevant s Art and Science of Operative Dentistry written by Harald Heymann and published by Mosby. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting an illustrated, step-by-step approach to restorative and preventive dentistry, this updated book draws from theory and practice, and is supported by clinical and laboratory research. It provides an understanding of caries and an approach to its treatment and prevention.