Download or read book The Effect of Fabrication History and Microstructure on the Mechanical Properties of Refractory Metals and Alloys written by Albert G. Imgram and published by . This book was released on 1963 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report summarizes the present knowledge concerning the relationship among fabrication history, metallurgical structure, and the mechanical properites of the refractory metals columbium, tantalum, bolybdenum, and tungsten, and their alloys. These are the refractory metals currently reveiveing the most attention for aerospace applications, and are therefore the materials considered in this survey. The report is organized into three main sections, titled ''Fabrication'', ''Microstructure and Alloying'', and ''Interstitial Impurities''. The data presented were selected as those which best illustrate the topics discussed. Descriptions of the metaljurgical principles involved are included. Suggestions for optimizing mechanical properties by controlling metallurgical structure are made where possible. (Author).
Download or read book U S Government Research Reports written by and published by . This book was released on 1964 with total page 1600 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index to DMIC Reports and Memoranda written by Battelle Memorial Institute. Defense Metals Information Center and published by . This book was released on 1968 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book U S Government Research Reports written by and published by . This book was released on 1963 with total page 1322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Minerals Yearbook written by and published by . This book was released on 1964 with total page 1330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book D M I C Report written by Battelle Memorial Institute. Defense Metals Information Center and published by . This book was released on 1964 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactor Materials written by and published by . This book was released on 1964 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Refractory Metal Alloys Metallurgy and Technology written by I. Machlin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication documents Proceedings of the Symposium on Metal lurgy and Technology of Refractory Metal Alloys, held in Washington, D.C. at the Washington Hilton Hotel on April 25-26, 1968, under sponsorship of the Refractory Metals Committee, Institute of Metals Division, of the Metallurgical Society of AIME, and the National Aeronautics and Space Administration. The Symposium presented critical reviews of selected topics in refractory metal alloys, thereby contributing to an in-depth understanding of the state-of-the-art, and establishing a base line for further research, development, and application. This Symposium is fifth in a series of conferences on refractory metals, sponsored by the Metallurgical Society of AlME. Publications issuing from the conferences are valuable technical and historical source books, tracing the evolution of refractory metals from early laboratory alloying studies to their present status as useful engineering materials. Refractory metals are arbitrarily defined by melting point. A 0 melting temperature of over 3500 F was selected as the minimum for this Symposium, thus excluding chromium and vanadium, which logically could be treated with other refractory metals in Groups VA and VIA of the periodic table. The Refractory Metals Committee is planning reviews of chromium and vanadium in subsequent conferences.
Download or read book Reactor Core Materials written by and published by . This book was released on 1964 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Forging Materials and Practices written by A. M. Sabroff and published by . This book was released on 1968 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Department of Defense Refractory Metals Sheet Rolling Program written by D. J. Maykuth and published by . This book was released on 1965 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is the third of a series which will periodically summarize the status of the various contracts involved in the Department of Defense Refractory Metals Sheet Rolling Program. Under this program, selected candidate materials are being carried through one or more of the following consecutive phases: Phase I, development of a sheet-production practice; Phase II, establishment of minimum design data; and Phase III, evaluation of sheetfabrication characteristics. To the present time, 13 contracts have been funded or planned in support of the Phase I, II, and III activities. This report summarizes the status of each of these individual contracts as of November 1, 1964. The first section describes the overall program of the Department of Defense Refractory Metals Sheet Rolling Program. Following, in the order of their discussions, are sections dealing with fabricable molybdenum alloys, unalloyed tungsten, columbium alloys, and tantalum alloys. (Author).
Download or read book A Discussion of the Physical Metallurgy of the 18 Per Cent Nickel Maraging Steels written by Albert M. Hall and published by . This book was released on 1963 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various aspects of the physical metallurgy of the 18 % nickel maraging steels are discussed in this report in the light of the knowledge which has thus far been accumulated on these steels. The 18 % nickel type of maraging steel was singled out for discussion because of its especially attractive combination of strength and fracture toughness, the comparative simplicity with which it can be hardened, and the relative ease with which it can be formed and joined. The highnickel maraging steels are considered to be outstanding members of a loose-knit family of agehardenable or precipitation-hardenable martensitic steels. Some comparisons and analogies are drawn among various members of this family with particular reference to the 18% nickel steels. (Author).
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: NSA is a comprehensive collection of international nuclear science and technology literature for the period 1948 through 1976, pre-dating the prestigious INIS database, which began in 1970. NSA existed as a printed product (Volumes 1-33) initially, created by DOE's predecessor, the U.S. Atomic Energy Commission (AEC). NSA includes citations to scientific and technical reports from the AEC, the U.S. Energy Research and Development Administration and its contractors, plus other agencies and international organizations, universities, and industrial and research organizations. References to books, conference proceedings, papers, patents, dissertations, engineering drawings, and journal articles from worldwide sources are also included. Abstracts and full text are provided if available.
Download or read book Tungsten Research and Development Review written by J. L. Ratliff and published by . This book was released on 1963 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Government-sponsored tungsten research and development efforts encompass a broad rage of technological activities. Typifying the extreme limits of efforts since January, 1960, studies have ranged from preparation of unalloyed metal to development of high-integrity fabricated shapes of tungsten-base materials. Nine major areas outline the broad over-all effort, and each is summarized within this report by brief technical discussions of 104 separate studies on 79 research programs. Included are preparation of metal, consolidation, primary and secondary working, joining, fabrication and performance of rocket nozzles, oxidation and other high-temperature reactions, protective coatings, properties, and physical metallurgy.
Download or read book High Strain Rate Behavior of Refractory Metals and Alloys written by Minerals, Metals and Materials Society. Fall Meeting and published by Minerals, Metals, & Materials Society. This book was released on 1992 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This aims to be the most complete volume available on the developing technology of refractory metals and alloys for high strain rate applications. Processing, testing and evaluation procedures for this group of specialized materials are thoroughly examined. Added emphasis is placed on high strain rate processing, dynamic compaction and forging, microstructure, texture, composition and loading rate effects on deformation and fracture.
Download or read book The Application of High Pressure in Metal deformation Processing written by F. W. Boulger and published by . This book was released on 1964 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: On October 3, 1963, a symposium was sponsored by the Bureau of Naval Weapons, Metalworking Processes and Equipment Program, on the application of high pressure in metal-deformation processing. Past research has shown that superimposed hydrostatic pressure can significantly increase the ductility at fracture of various materials. These observations have stimulated considerable interest in applying this hydrostatic-pressure effect to metal deformation processing, where it was anticipated that improved ductility and fabricability of brittle materials could be realized. Hydrostatic extrusion and hydrodynamic compressive forging were two such fabrication techniques discussed at the symposium, and preliminary results were found to be encouraging. Another fabrication process that will be investigated in the near future is sheet drawing, where the effect of superimposed pressure improves the ductility to fracture, it was noted that pressure cycling did not improve either the strength or ductility of steels containing various amounts of carbon. In addition to the mechanical-property effects, hydrostatic pressure has been found to affect measurably, numerous metallurgical properties of metals and alloys. (Author).
