Download or read book The Effect of Bulk Composition on Swelling and Radiation induced Segregation in Austenitic Alloys written by and published by . This book was released on 2000 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation induced Segregation and the Relationship to Physical Properties in Irradiated Austenitic Alloys written by and published by . This book was released on 2002 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiation-induced changes in composition are studied because these changes can degrade failure of materials irradiated in nuclear reactors. In this work, the effect of alloy composition on radiation-induced segregation, hardening, and void swelling is presented. Five alloys, Fe-18Cr-8Ni, Fe-16Cr-13Ni, Fe-18Cr-40Ni, Fe-16Cr-13Ni+Mo, and Fe-16Cr-13Ni+Mo+P (all compositions in wt. %), were irradiated with 3.2 MeV protons at 400 C to a dose of 0.5 displacements per atom. The change in grain boundary composition was measured using field emission gun scanning transmission electron microscopy and the hardening was measured using Vickers indentation. Void swelling is calculated from the void size distribution measured using transmission electron microscopy. After irradiation, Cr depletes and Ni enriches at grain boundaries. Increasing bulk Ni concentration causes greater Cr depletion and Ni enrichment at grain boundaries. For alloys with 16 Cr, the addition of P reduces the Cr depletion and Ni enrichment. Hardening does not directly correlate with composition, but a framework for isolating the effect of hardening and segregation on cracking is suggested. The amount of void swelling in the irradiated material is shown to correspond inversely with segregation. Those alloys with greater segregation tend to swell less.
Download or read book Effects of Radiation on Materials written by Margaret L. Hamilton and published by ASTM International. This book was released on 2000 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling the Effect of Irradiation and Post irradiation Annealing on Grain Boundary Composition in Austenitic Fe Cr Ni Alloys written by and published by . This book was released on 1998 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many irradiation effects in Fe-Cr-Ni alloys such as radiation-induced segregation, radiation-enhanced diffusion, and void swelling are known to vary with bulk alloy composition. The development of microstructural and microchemical changes during irradiation and during post-irradiation annealing is determined by the rate of diffusion of point defects and alloying elements. To accurately predict the changes in grain boundary chemistry due to radiation-induced segregation and post-irradiation annealing, the composition dependence of diffusion parameters, such as the migration energy, must be known. A model has been developed which calculates migration diffusivity. The advantages of this calculational method are that a single set of input parameters can be used for a wide range of bulk alloy compositions, and the effects of local order can easily be incorporated into the calculations. A description of the model is presented, and model calculations are compared to segregation measurements from seven different iron-chromium-nickel alloys, irradiated with protons to doses from 0.1 to 3.0 dpa at temperatures between 200 C and 600 C. Results show that segregation trends can be modeled using a single set of input parameters with the difference between model calculation and measurement being less than 5 at%, but usually less than 2 at%. Additionally, model predictions are compared to grain boundary composition measurements of neutron irradiated 304 stainless steel following annealing. For the limited annealing data available, model calculations correctly predict the magnitude and time scale for recovery of the grain boundary composition.
Download or read book Modeling of Radiation induced Segregation in Austenitic Fe Cr Ni Alloys written by Todd Randall Allen and published by . This book was released on 1997 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Radiation on Materials written by and published by . This book was released on 2000 with total page 1296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics of Radiation Effects in Crystals written by R.A. Johnson and published by Elsevier. This book was released on 2012-12-02 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: ``Physics of Radiation Effects in Crystals'' is presented in two parts. The first part covers the general background and theory of radiation effects in crystals, including the theory describing the generation of crystal lattice defects by radiation, the kinetic approach to the study of the disposition of these defects and the effects of the diffusion of these defects on alloy compositions and phases. Specific problems of current interest are treated in the second part and include anisotropic dimensional changes in x-uranium, zirconium and graphite, acceleration of thermal creep in reactor materials, and radiation damage of semiconductors and superconductors.
Download or read book Effects of Radiation on Materials written by H. R. Brager and published by ASTM International. This book was released on 1982 with total page 1250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Radiation on Materials written by Arvind S. Kumar and published by ASTM International. This book was released on 1994 with total page 1319 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Influence of Alloy Composition on Irradiation induced Grain Boundary Segregation in Austenitic Alloys written by and published by . This book was released on 1992 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2692 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation induced Changes in Microstructure written by F. A. Garner and published by ASTM International. This book was released on 1987 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Nuclear Materials written by and published by Elsevier. This book was released on 2020-07-22 with total page 4871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1996 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Energy Update written by and published by . This book was released on 1986 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
