Download or read book The Development of P type Transparent Conducting Oxide Materials Using Atomic Layer Deposition written by Jerome Innocent and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomic Layer Deposition of Zinc Based Transparent Conductive Oxides written by Sanjeev Kumar Gurram and published by Fraunhofer Verlag. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work Atomic Layer deposition of niobium and titanium doped ZnO based Transparent Conductive Oxide (TCO) coatings were developed. The fundamentals required for the deposition and doping of ZnO TCOs are discussed. The various opto-electronic properties of the niobium and titanium doped ZnO films were determined and compared. A model was proposed to explain the various changes in the opto-electronic properties of these films.
Download or read book Physics and Technology of Amorphous Crystalline Heterostructure Silicon Solar Cells written by Wilfried G. J. H. M. van Sark and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s solar cell multi-GW market is dominated by crystalline silicon (c-Si) wafer technology, however new cell concepts are entering the market. One very promising solar cell design to answer these needs is the silicon hetero-junction solar cell, of which the emitter and back surface field are basically produced by a low temperature growth of ultra-thin layers of amorphous silicon. In this design, amorphous silicon (a-Si:H) constitutes both „emitter“ and „base-contact/back surface field“ on both sides of a thin crystalline silicon wafer-base (c-Si) where the electrons and holes are photogenerated; at the same time, a-Si:H passivates the c-Si surface. Recently, cell efficiencies above 23% have been demonstrated for such solar cells. In this book, the editors present an overview of the state-of-the-art in physics and technology of amorphous-crystalline heterostructure silicon solar cells. The heterojunction concept is introduced, processes and resulting properties of the materials used in the cell and their heterointerfaces are discussed and characterization techniques and simulation tools are presented.
Download or read book Handbook of Modern Coating Technologies written by Mahmood Aliofkhazraei and published by Elsevier. This book was released on 2021-03-06 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Modern Coating Technologies: Application and Development reviews recent applications and developments of modern coating technologies. The topics in this volume consist of role of antibacterial coatings in the development of biomaterials, insights of technologies for self-healing organic coatings, sensor applications, application of carbon nanotubes–based coating in the field of art conservation, oxide-based self-cleaning and corrosion-protective coatings, protective coatings for wood, applications of optical coatings on spectral selective structures, application of natural antimicrobial coating for controlling foodborne pathogens on meat and fresh produce, efficacy of antimicrobial coating in reducing pathogens on meat, composite membrane: fabrication, characterization, and applications, development of nanostructured HVOF coatings on high strength steel components for turbine blades, nanoscale multilayered composite coating, applications of sol–gel coatings, application of graphene in protective coating industry, application of coatings in outdoor high-voltage installations, defects and doping effects in thin films of transparent and conductive oxides, and functional coatings for lab-on-a-chip systems based on phospholipid polymers.
Download or read book Atom Probe Tomography written by Williams Lefebvre and published by Academic Press. This book was released on 2016-05-30 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atom Probe Tomography is aimed at beginners and researchers interested in expanding their expertise in this area. It provides the theoretical background and practical information necessary to investigate how materials work using atom probe microscopy techniques, and includes detailed explanations of the fundamentals, the instrumentation, contemporary specimen preparation techniques, and experimental details, as well as an overview of the results that can be obtained. The book emphasizes processes for assessing data quality and the proper implementation of advanced data mining algorithms. For those more experienced in the technique, this book will serve as a single comprehensive source of indispensable reference information, tables, and techniques. Both beginner and expert will value the way the book is set out in the context of materials science and engineering. In addition, its references to key research outcomes based upon the training program held at the University of Rouen—one of the leading scientific research centers exploring the various aspects of the instrument—will further enhance understanding and the learning process. - Provides an introduction to the capabilities and limitations of atom probe tomography when analyzing materials - Written for both experienced researchers and new users - Includes exercises, along with corrections, for users to practice the techniques discussed - Contains coverage of more advanced and less widespread techniques, such as correlative APT and STEM microscopy
Download or read book Chemical Vapour Deposition written by Anthony C. Jones and published by Royal Society of Chemistry. This book was released on 2009 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book is one of the most comprehensive overviews ever written on the key aspects of chemical vapour deposition processes and it is more comprehensive, technically detailed and up-to-date than other books on CVD. The contributing authors are all practising CVD technologists and are leading international experts in the field of CVD. It presents a logical and progressive overview of the various aspects of CVD processes. Basic concepts, such as the various types of CVD processes, the design of CVD reactors, reaction modelling and CVD precursor chemistry are covered in the first few"--Jacket
Download or read book Handbook of Transparent Conductors written by David S. Ginley and published by Springer Science & Business Media. This book was released on 2010-09-11 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent conducting materials are key elements in a wide variety of current technologies including flat panel displays, photovoltaics, organic, low-e windows and electrochromics. The needs for new and improved materials is pressing, because the existing materials do not have the performance levels to meet the ever- increasing demand, and because some of the current materials used may not be viable in the future. In addition, the field of transparent conductors has gone through dramatic changes in the last 5-7 years with new materials being identified, new applications and new people in the field. “Handbook of Transparent Conductors” presents transparent conductors in a historical perspective, provides current applications as well as insights into the future of the devices. It is a comprehensive reference, and represents the most current resource on the subject.
Download or read book Atomic Layer Deposition of Nanostructured Materials written by Nicola Pinna and published by John Wiley & Sons. This book was released on 2012-09-19 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomic layer deposition, formerly called atomic layer epitaxy, was developed in the 1970s to meet the needs of producing high-quality, large-area fl at displays with perfect structure and process controllability. Nowadays, creating nanomaterials and producing nanostructures with structural perfection is an important goal for many applications in nanotechnology. As ALD is one of the important techniques which offers good control over the surface structures created, it is more and more in the focus of scientists. The book is structured in such a way to fi t both the need of the expert reader (due to the systematic presentation of the results at the forefront of the technique and their applications) and the ones of students and newcomers to the fi eld (through the first part detailing the basic aspects of the technique). This book is a must-have for all Materials Scientists, Surface Chemists, Physicists, and Scientists in the Semiconductor Industry.
Download or read book Atomic Layer Deposition in Energy Conversion Applications written by Julien Bachmann and published by John Wiley & Sons. This book was released on 2017-03-15 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining the two topics for the first time, this book begins with an introduction to the recent challenges in energy conversion devices from a materials preparation perspective and how they can be overcome by using atomic layer deposition (ALD). By bridging these subjects it helps ALD specialists to understand the requirements within the energy conversion field, and researchers in energy conversion to become acquainted with the opportunities offered by ALD. With its main focus on applications of ALD for photovoltaics, electrochemical energy storage, and photo- and electrochemical devices, this is important reading for materials scientists, surface chemists, electrochemists, electrotechnicians, physicists, and those working in the semiconductor industry.
Download or read book Oxide Based Materials and Structures written by Rada Savkina and published by CRC Press. This book was released on 2020-05-07 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide-based materials and structures are becoming increasingly important in a wide range of practical fields including microelectronics, photonics, spintronics, power harvesting, and energy storage in addition to having environmental applications. This book provides readers with a review of the latest research and an overview of cutting-edge patents received in the field. It covers a wide range of materials, techniques, and approaches that will be of interest to both established and early-career scientists in nanoscience and nanotechnology, surface and material science, and bioscience and bioengineering in addition to graduate students in these areas. Features: Contains the latest research and developments in this exciting and emerging field Explores both the fundamentals and applications of the research Covers a wide range of materials, techniques, and approaches
Download or read book Organometallic Chemistry written by Nathan J Patmore and published by Royal Society of Chemistry. This book was released on 2018-11-16 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increase in volume, velocity and variety of information, researchers can find it difficult to keep up to date with the literature in their field. Providing an invaluable resource, this volume contains analysed, evaluated and distilled information on the latest in organometallic chemistry research and emerging fields. The reviews range in scope and include π-coordinated arene metal complexes and catalysis by arene exchange, rylenes as chromophores in catalysts for CO2 photoreduction, metal nodes and metal sites in metal–organic frameworks, developments in molecular precursors for CVD and ALD, and multiphoton luminescence processes in f-element containing compounds.
Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.
Download or read book Atomic Layer Deposition of Functional Oxide Materials written by Pei-Yu Chen (Ph. D. in chemical engineering) and published by . This book was released on 2020 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid development of semiconductor industry driven by the need of electronic devices with lower cost, higher speed, lower power consumption and functionality requires employment of new semiconductors and new oxide materials. In this research, atomic layer deposition (ALD), which has become an important deposition technique for industries, was applied as the main growth method for oxide thin films. The ALD of rare earth oxides as gate dielectrics on GaN semiconductor and the ALD of functional perovskite stannates on SrTiO3 (STO) crystal were explored. GaN has been considered as a next generation semiconductor due to its superior properties. A suitable surface cleaning process and an appropriate gate oxide are necessary to improve GaN device performance. The GaN(0001) surface cleaned by both ex-situ wet cleaning (HCl and NH4OH solutions) and in-situ N2 plasma treatment was proved to be impurity-free by x-ray photoelectron spectroscopy and was ready for the following crystalline rare earth oxide growths. In this work, Er2O3 and La2O3 were selected as gate oxides on GaN(0001), and their film growth, properties, structures and interfaces with GaN were studied. The Er2O3 thin films were smooth and crystalline as-deposited on GaN(0001) with a cubic phase while the La2O3 films exhibited an island growth when deposited directly on GaN(0001). A template layer was required to form a 2-dimensional La2O3 thin film, and the La2O3 structure might be different (cubic or hexagonal) with different template layers and film thicknesses. Post-deposition annealing in vacuum could help improve the film quality, however, it would also increase the interfacial thickness. Perovskite oxides, which can offer a wide range of functionalities, are another family of materials that people are interested in. BaSnO3 and SrSnO3 have emerged as popular perovskites in the past decade owing to their wide band gap, high optical transparency, and high electron mobility at room temperature after doped with La. Cubic BaSnO3(001) and pseudocubic SrSnO3(001) were deposited by ALD for the first time and were investigated on single STO(001) crystal. BaSnO3 and SrSnO3 films were smooth and crystalline but relaxed toward the bulk structure because of the large lattice mismatches between the films and STO. Stoichiometry of the film and the post-deposition annealing condition are critical to the film properties
Download or read book Transparent Conductive Materials written by David Levy and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by well-known pioneers in the field, this handbook and ready reference provides a comprehensive overview of transparent conductive materials with a strong application focus. Following an introduction to the materials and recent developments, subsequent chapters discuss the synthesis and characterization as well as the deposition techniques that are commonly used for energy harvesting and light emitting applications. Finally, the book concludes with a look at future technological advances. All-encompassing and up-to-date, this interdisciplinary text runs the gamut from chemistry and materials science to engineering, from academia to industry, and from fundamental challenges to readily available applications.
Download or read book Handbook of Deposition Technologies for Films and Coatings written by Peter M. Martin and published by William Andrew. This book was released on 2009-12-01 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.
Download or read book Transparent Conductive Zinc Oxide written by Klaus Ellmer and published by Springer Science & Business Media. This book was released on 2007-12-29 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zinc oxide (ZnO) belongs to the class of transparent conducting oxides that can be used as transparent electrodes in electronic devices or heated windows. In this book the material properties of, the deposition technologies for, and applications of zinc oxide in thin film solar cells are described in a comprehensive manner. Structural, morphological, optical and electronic properties of ZnO are treated in this review.
Download or read book Evaluation of Novel Metalorganic Precursors for Atomic Layer Deposition of Nickel based Thin Films written by Varun Sharma and published by GRIN Verlag. This book was released on 2015-12-21 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master's Thesis from the year 2015 in the subject Physics - Electrodynamics, grade: 1.0, Dresden Technical University (Faculty of Electrical and Computer Engineering/Institute of Semiconductors and Microsystems), course: Nanoelectronic Systems, language: English, abstract: Nickel and nickel(II) oxide are widely used in advanced electronic devices. In microelectronic industry, nickel is used to form nickel silicide. The nickel mono-silicide (NiSi) has emerged as an excellent material of choice for source-drain contact applications below 45 nm node CMOS technology. As compared to other silicides used for the contact applications, NiSi is preferred because of its low resistivity, low contact resistance, relatively low formation temperature and low silicon consumption. Nickel is used in nickel-based rechargeable batteries and ferromagnetic random access memories (RAMs). Nickel(II) oxide is utilized as transistor gate-oxide and oxide in resistive RAMs. Atomic Layer Deposition (ALD) is a special type of Chemical Vapor Deposition (CVD) technique, that is used to deposit very smooth as well as homogeneous thin films with excellent conformality even at high aspect ratios. In spite of huge number of practical applications of nickel and nickel(II) oxide, a few nickel precursors are available for thermal based ALD. Moreover, these precursors have resulted in poor film qualities and the process properties were also limited. Therefore in this master thesis, the properties of various novel nickel precursors had to be evaluated. All novel precursors are heteroleptic (different types of ligands) complexes and were specially designed by the manufacturer for thermal based ALD of pure nickel with hydrogen as a co-reactant. In order to evaluate the novel precursors, a new methodology was designed to test small amounts (down to 2 g) of precursors in a very time efficient way. This methodology includes: TGA/DTA curve analyses of the precursors, thermal stability tests in which the precursors (
